bizarre performance issues in 6.2 release
Steven H. Baeighkley
stevenb at frii.com
Sat Feb 17 00:02:32 UTC 2007
Greetings,
First let me apologize for the length of this message, I'm just trying
to provide all the information that I can.
We have been having some trouble with an upgrade to 6.2-Release. The
performance just seems out of whack. We concede that there could be a
reporting issue, but the results we are seeing are far too strange for
that to be our first inclination.
Background:
We have 2 identical supermicro superserver 6022c. These have dual 2.0
Xeons with hyperthreading and 2 GB of RAM. A full description of the
system is avaialble here
http://www.supermicro.com/products/system/2U/6022/SYS-6022C.cfm
These servers are running apache, perl, proftpd and php. One server is
running 4.11 and is rocking the world, load is rarely above 1 and is
regularly below .5. The other server is running 6.2 and regularly has
load between 2 and 6 despite serving fewer connections than the 4.11 box.
We have tried the following sysctl variables in both the commented and
default values.
#kern.ipc.maxsockets=32768 # 12328 Maximum number of sockets avaliable
#kern.ipc.somaxconn=4096 # 128 Maximum pending socket
connection queue size
#kern.ipc.nmbclusters=65536 # 25600 Maximum number of mbuf clusters
allowed
##kern.ipc.shm_use_phys=1 # 0 disallow shared memory from
swapping (saves kernel work)
##kern.maxfiles=12328 # 12328 increase maxfiles
##net.inet.tcp.sendspace=131072 # 32768 increase tcp buffers
##net.inet.tcp.recvspace=131072 # 65536 increase tcp buffers
##vm.v_cache_min=5000 # 26369
#net.inet.tcp.msl=5000 # 30000 Maximum segment lifetime
We currently have these values set in /boot/loader.conf
userconfig_script_load="YES"
kern.ipc.nmbclusters="65536"
hint.acpi.0.disabled="1"
# moved to sysctl.conf
#kern.ipc.maxsockets="32768"
##kern.ipc.nmbclusters="16384"
we have tried apache's recommendations for freebsd tuning. We upgraded
to php 5.2.1 and zend optimizer 3.2.2 yesterday which did increase the
performance some, however it is still far too high.
NETSTAT, VMSTAT, NFSSTAT all show very similar values between the 2
systems. We ran IOZONE through a battery of tests on the drives and
found that the 6.2 box actually had better disk performance. We assume
we just need to tune things correctly however we're not sure what to try
at this point. Our research indicates that we really shouldn't be seeing
these performance problems.
The kicker is this. We kept the original 4.11 drive for the 6.2 server
intact. When we put the 4.11 drive back in, the performance is the same
as the other machine. We assume we are just missing something but after
going through all the tuning manuals we can find, nothing has leaped out
as the problem.
here are dmesg from the 2 differnet versions running on the same hardware.
verbose dmesg 6.2
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE-p1 #0: Tue Feb 13 14:55:53 MST 2007
root at fweb01.frii.com:/frii/src/obj-6.2/frii/src/FreeBSD-6.2-RELEASE/sys/PASIPHAE
Preloaded elf kernel "/boot/kernel/kernel" at 0xc07de000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc07de16c.
Calibrating clock(s) ... i8254 clock: 1193286 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1982529804 Hz
CPU: Intel(R) XEON(TM) CPU 2.00GHz (1982.53-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf24 Stepping = 4
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
Logical CPUs per core: 2
real memory = 2147418112 (2047 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000828000 - 0x000000007db9ffff, 2100789248 bytes (512888 pages)
avail memory = 2100547584 (2003 MB)
MP Configuration Table version 1.4 found at 0xc00f1400
Table 'FACP' at 0x7fff3040
Table 'APIC' at 0x7fff6c40
MADT: Found table at 0x7fff6c40
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 1: enabled
SMP: Added CPU 1 (AP)
MADT: Found CPU APIC ID 2 ACPI ID 2: enabled
SMP: Added CPU 2 (AP)
MADT: Found CPU APIC ID 3 ACPI ID 3: enabled
SMP: Added CPU 3 (AP)
INTR: Adding local APIC 0 as a target
ACPI APIC Table: <IntelR AWRDACPI>
INTR: Adding local APIC 2 as a target
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
bios32: Found BIOS32 Service Directory header at 0xc00faee0
bios32: Entry = 0xfb370 (c00fb370) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb3a0
pnpbios: Found PnP BIOS data at 0xc00fbe10
pnpbios: Entry = f0000:be40 Rev = 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 1
APIC: CPU 2 has ACPI ID 2
APIC: CPU 3 has ACPI ID 3
MADT: Found IO APIC ID 4, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: high
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
random: <entropy source, Software, Yarrow>
io: <I/O>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
nfslock: pseudo-device
null: <null device, zero device>
npx0: INT 16 interface
acpi0: <IntelR AWRDACPI> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=25318086)
pcibios: BIOS version 2.10
Found $PIR table, 9 entries at 0xc00fded0
PCI-Only Interrupts: 5 7 10 11 12
Location Bus Device Pin Link IRQs
slot 1 0 2 A 0x62 3 4 5 7 9 10 11 12 14 15
slot 1 0 2 B 0x62 3 4 5 7 9 10 11 12 14 15
slot 1 0 2 C 0x62 3 4 5 7 9 10 11 12 14 15
slot 1 0 2 D 0x62 3 4 5 7 9 10 11 12 14 15
slot 2 4 8 A 0x68 3 4 5 7 9 10 11 12 14 15
slot 2 4 8 B 0x69 3 4 5 7 9 10 11 12 14 15
slot 2 4 8 C 0x6a 3 4 5 7 9 10 11 12 14 15
slot 2 4 8 D 0x6b 3 4 5 7 9 10 11 12 14 15
slot 3 4 7 A 0x60 3 4 5 7 9 10 11 12 14 15
slot 3 4 7 B 0x61 3 4 5 7 9 10 11 12 14 15
slot 3 4 7 C 0x62 3 4 5 7 9 10 11 12 14 15
slot 3 4 7 D 0x63 3 4 5 7 9 10 11 12 14 15
slot 4 4 1 A 0x61 3 4 5 7 9 10 11 12 14 15
slot 4 4 1 B 0x62 3 4 5 7 9 10 11 12 14 15
slot 4 4 1 C 0x63 3 4 5 7 9 10 11 12 14 15
slot 4 4 1 D 0x60 3 4 5 7 9 10 11 12 14 15
slot 5 4 2 A 0x62 3 4 5 7 9 10 11 12 14 15
slot 5 4 2 B 0x63 3 4 5 7 9 10 11 12 14 15
slot 5 4 2 C 0x60 3 4 5 7 9 10 11 12 14 15
slot 5 4 2 D 0x61 3 4 5 7 9 10 11 12 14 15
slot 6 4 3 A 0x63 3 4 5 7 9 10 11 12 14 15
slot 6 4 3 B 0x60 3 4 5 7 9 10 11 12 14 15
slot 6 4 3 C 0x61 3 4 5 7 9 10 11 12 14 15
slot 6 4 3 D 0x62 3 4 5 7 9 10 11 12 14 15
slot 7 3 4 A 0x60 3 4 5 7 9 10 11 12 14 15
slot 7 3 4 B 0x61 3 4 5 7 9 10 11 12 14 15
slot 7 3 4 C 0x62 3 4 5 7 9 10 11 12 14 15
slot 7 3 4 D 0x63 3 4 5 7 9 10 11 12 14 15
embedded 0 31 A 0x60 3 4 5 7 9 10 11 12 14 15
embedded 0 31 B 0x61 3 4 5 7 9 10 11 12 14 15
embedded 0 31 C 0x6b 3 4 5 7 9 10 11 12 14 15
embedded 0 31 D 0x63 3 4 5 7 9 10 11 12 14 15
embedded 0 1 A 0x6a 3 4 5 7 9 10 11 12 14 15
embedded 0 1 B 0x6b 3 4 5 7 9 10 11 12 14 15
embedded 0 1 C 0x60 3 4 5 7 9 10 11 12 14 15
embedded 0 1 D 0x61 3 4 5 7 9 10 11 12 14 15
AcpiOsDerivePciId: bus 0 dev 31 func 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xd9f94000 pa 0x9d000
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/2 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pci_link0: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link0: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link0: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link1: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 7 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link1: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 7 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link1: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link2: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link2: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link2: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link3: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link4: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link4: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link4: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link5: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link5: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link5: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link6: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link6: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link6: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link7: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 12 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link7: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 12 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link7: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x2531, revid=0x04
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0xe090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 3, range 32, base f0000000, size 26, enabled
found-> vendor=0x8086, dev=0x2532, revid=0x04
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2533, revid=0x04
bus=0, slot=2, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x244e, revid=0x04
bus=0, slot=30, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x0e (3500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2440, revid=0x04
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x244b, revid=0x04
bus=0, slot=31, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000f000, size 4, enabled
found-> vendor=0x8086, dev=0x2442, revid=0x04
bus=0, slot=31, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=5
map[20]: type 4, range 32, base 0000b000, size 5, enabled
pcib0: matched entry for 0.31.INTD
pcib0: slot 31 INTD hardwired to IRQ 19
found-> vendor=0x8086, dev=0x2443, revid=0x04
bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=7
map[20]: type 4, range 32, base 00000500, size 4, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 17
found-> vendor=0x8086, dev=0x2444, revid=0x04
bus=0, slot=31, func=4
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=12
map[20]: type 4, range 32, base 0000b800, size 5, enabled
pcib0: matched entry for 0.31.INTC
pcib0: slot 31 INTC hardwired to IRQ 23
agp0: <Intel 82860 host to AGP bridge> mem 0xf0000000-0xf3ffffff at
device 0.0 on pci0
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xf0000000
agp0: allocating GATT for aperture of size 64M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xfff00000-0xfffff
pcib1: prefetched decode 0xfff00000-0xfffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
pcib2: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 3
pcib2: I/O decode 0x9000-0x9fff
pcib2: memory decode 0xf4000000-0xf5ffffff
pcib2: prefetched decode 0xfff00000-0xfffff
pcib2: could not get PCI interrupt routing table for \\_SB_.PCI0.HUBA -
AE_NOT_FOUND
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
found-> vendor=0x8086, dev=0x1360, revid=0x03
bus=2, slot=31, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0020, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x80 (32000 ns)
pcib3: <ACPI PCI-PCI bridge> at device 31.0 on pci2
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0x9000-0x9fff
pcib3: memory decode 0xf4000000-0xf5ffffff
pcib3: prefetched decode 0xfff00000-0xfffff
pci3: <ACPI PCI bus> on pcib3
pci3: physical bus=3
found-> vendor=0x8086, dev=0x1161, revid=0x01
bus=3, slot=0, func=0
class=08-00-20, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base f5001000, size 12, memory disabled
pcib3: (null) requested memory range 0xf5001000-0xf5001fff: good
pcib2: (null) requested memory range 0xf5001000-0xf5001fff: good
found-> vendor=0x9005, dev=0x00cf, revid=0x01
bus=3, slot=4, func=0
class=01-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x28 (10000 ns), maxlat=0x19
(6250 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 00009000, size 8, enabled
pcib3: (null) requested I/O range 0x9000-0x90ff: in range
pcib2: (null) requested I/O range 0x9000-0x90ff: in range
map[14]: type 1, range 64, base f5000000, size 12, enabled
pcib3: (null) requested memory range 0xf5000000-0xf5000fff: good
pcib2: (null) requested memory range 0xf5000000-0xf5000fff: good
pcib3: matched entry for 3.4.INTA
pcib3: slot 4 INTA hardwired to IRQ 18
found-> vendor=0x9005, dev=0x00cf, revid=0x01
bus=3, slot=4, func=1
class=01-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x28 (10000 ns), maxlat=0x19
(6250 ns)
intpin=b, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 00009400, size 8, enabled
pcib3: (null) requested I/O range 0x9400-0x94ff: in range
pcib2: (null) requested I/O range 0x9400-0x94ff: in range
map[14]: type 1, range 64, base f5002000, size 12, enabled
pcib3: (null) requested memory range 0xf5002000-0xf5002fff: good
pcib2: (null) requested memory range 0xf5002000-0xf5002fff: good
pcib3: matched entry for 3.4.INTB
pcib3: slot 4 INTB hardwired to IRQ 18
pci3: <base peripheral, interrupt controller> at device 0.0 (no driver
attached)
ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x9000-0x90ff mem
0xf5000000-0xf5000fff irq 18 at device 4.0 on pci3
ahc0: Defaulting to MEMIO off
ahc0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x9000
ahc0: Reading SEEPROM...done.
ahc0: Manual SE Termination
ahc0: Manual LVD Termination
ahc0: BIOS eeprom is present
ahc0: Secondary High byte termination Enabled
ahc0: Secondary Low byte termination Enabled
ahc0: Primary Low Byte termination Enabled
ahc0: Primary High Byte termination Enabled
ahc0: Downloading Sequencer Program... 423 instructions downloaded
ahc0: Features 0x1fef6, Bugs 0x40, Flags 0x28485560
ioapic0: routing intpin 18 (PCI IRQ 18) to vector 49
ahc0: [GIANT-LOCKED]
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x9400-0x94ff mem
0xf5002000-0xf5002fff irq 18 at device 4.1 on pci3
ahc1: Defaulting to MEMIO off
ahc1: Reserved 0x100 bytes for rid 0x10 type 4 at 0x9400
ahc1: Reading SEEPROM...done.
ahc1: Manual SE Termination
ahc1: Manual LVD Termination
ahc1: BIOS eeprom is present
ahc1: Secondary High byte termination Enabled
ahc1: Secondary Low byte termination Enabled
ahc1: Primary Low Byte termination Enabled
ahc1: Primary High Byte termination Enabled
ahc1: Downloading Sequencer Program... 423 instructions downloaded
ahc1: Features 0x1fef6, Bugs 0x40, Flags 0x20485560
ahc1: [GIANT-LOCKED]
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib4: secondary bus 4
pcib4: subordinate bus 4
pcib4: I/O decode 0xa000-0xafff
pcib4: memory decode 0xf6000000-0xf8ffffff
pcib4: prefetched decode 0xfff00000-0xfffff
pcib4: Subtractively decoded bridge.
pci4: <ACPI PCI bus> on pcib4
pci4: physical bus=4
found-> vendor=0x8086, dev=0x1076, revid=0x00
bus=4, slot=2, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0230, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 1, range 32, base f8120000, size 17, enabled
pcib4: (null) requested memory range 0xf8120000-0xf813ffff: good
map[14]: type 1, range 32, base f8100000, size 17, enabled
pcib4: (null) requested memory range 0xf8100000-0xf811ffff: good
map[18]: type 4, range 32, base 0000a000, size 6, enabled
pcib4: (null) requested I/O range 0xa000-0xa03f: in range
pcib4: matched entry for 4.2.INTA
pcib4: slot 2 INTA hardwired to IRQ 18
found-> vendor=0x8086, dev=0x1229, revid=0x08
bus=4, slot=4, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x38
(14000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base f8140000, size 12, enabled
pcib4: (null) requested memory range 0xf8140000-0xf8140fff: good
map[14]: type 4, range 32, base 0000a400, size 6, enabled
pcib4: (null) requested I/O range 0xa400-0xa43f: in range
map[18]: type 1, range 32, base f8000000, size 20, enabled
pcib4: (null) requested memory range 0xf8000000-0xf80fffff: good
pcib4: matched entry for 4.4.INTA
pcib4: slot 4 INTA hardwired to IRQ 16
found-> vendor=0x1002, dev=0x4752, revid=0x27
bus=4, slot=7, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0087, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base f7000000, size 24, enabled
pcib4: (null) requested memory range 0xf7000000-0xf7ffffff: good
map[14]: type 4, range 32, base 0000a800, size 8, enabled
pcib4: (null) requested I/O range 0xa800-0xa8ff: in range
map[18]: type 1, range 32, base f8141000, size 12, enabled
pcib4: (null) requested memory range 0xf8141000-0xf8141fff: good
pcib4: matched entry for 4.7.INTA
pcib4: slot 7 INTA hardwired to IRQ 16
em0: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port
0xa000-0xa03f mem 0xf8120000-0xf813ffff,0xf8100000-0xf811ffff irq 18 at
device 2.0 on pci4
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xf8120000
em0: Reserved 0x40 bytes for rid 0x18 type 4 at 0xa000
em0: bpf attached
em0: Ethernet address: 00:0e:0c:2e:f5:6c
em0: [MPSAFE]
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xa400-0xa43f mem
0xf8140000-0xf8140fff,0xf8000000-0xf80fffff irq 16 at device 4.0 on pci4
fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf8140000
fxp0: using memory space register mapping
fxp0: PCI IDs: 8086 1229 8086 100c 0008
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
fxp0: Ethernet address: 00:30:48:22:6e:3e
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 50
fxp0: [MPSAFE]
pci4: <display, VGA> at device 7.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf000
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=00 ostat1=00
ata0: stat0=0x01 err=0x01 lsb=0x01 msb=0x01
ata0: stat1=0x01 err=0x01 lsb=0x01 msb=0x01
ata0: reset tp2 stat0=01 stat1=01 devices=0x0
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 51
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=7f
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: reset tp2 stat0=00 stat1=ff devices=0x4<ATAPI_MASTER>
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 52
ata1: [MPSAFE]
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port
0xb000-0xb01f irq 19 at device 31.2 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb000
ioapic0: routing intpin 19 (PCI IRQ 19) to vector 53
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port
0xb800-0xb81f irq 23 at device 31.4 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb800
ioapic0: routing intpin 23 (PCI IRQ 23) to vector 54
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 80
ioapic0: routing intpin 6 (ISA IRQ 6) to vector 55
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 56
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
ahc_isa_probe 0: ioport 0xc00 alloc failed
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
ppc0 failed to probe at irq 7 on isa0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0x9ca1 0x9ca1 0x9ca1 0x9ca1
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 57
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x9ca1 0x9ca1 0x9ca1 0x9ca1
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 134617 -> 100000
procfs registered
lapic: Divisor 2, Frequency 49563070 hz
Timecounter "TSC" frequency 1982529804 Hz quality -100
Timecounters tick every 1.000 msec
lo0: bpf attached
Waiting 5 seconds for SCSI devices to settle
(noperiph:em0: Link is up 100 Mbps Half Duplex
ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
(noperiph:ahc1:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting PIO4 on ICH2 chip
acd0: setting UDMA33 on ICH2 chip
acd0: <MATSHITA CR-177/7T03> CDROM drive at ata1 as master
acd0: read 4125KB/s (4125KB/s), 128KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ahc0: Selection Timeout on A:8. 0 SCBs aborted
ahc1: Selection Timeout on A:1. 0 SCBs aborted
ahc0: Selection Timeout on A:0. 0 SCBs aborted
ahc1: Selection Timeout on A:6. 0 SCBs aborted
ahc0: Selection Timeout on A:1. 0 SCBs aborted
ahc1: Selection Timeout on A:12. 0 SCBs aborted
ahc0: Selection Timeout on A:2. 0 SCBs aborted
ahc1: Selection Timeout on A:15. 0 SCBs aborted
ahc0: Selection Timeout on A:3. 0 SCBs aborted
ahc1: Selection Timeout on A:2. 0 SCBs aborted
ahc0: Selection Timeout on A:4. 0 SCBs aborted
ahc1: Selection Timeout on A:3. 0 SCBs aborted
ahc0: Selection Timeout on A:5. 0 SCBs aborted
ahc1: Selection Timeout on A:4. 0 SCBs aborted
ahc0: Selection Timeout on A:6. 0 SCBs aborted
ahc1: Selection Timeout on A:5. 0 SCBs aborted
ahc0: Selection Timeout on A:9. 0 SCBs aborted
ahc1: Selection Timeout on A:8. 0 SCBs aborted
ahc0: Selection Timeout on A:10. 0 SCBs aborted
ahc1: Selection Timeout on A:9. 0 SCBs aborted
ahc0: Selection Timeout on A:11. 0 SCBs aborted
ahc1: Selection Timeout on A:10. 0 SCBs aborted
ahc0: Selection Timeout on A:12. 0 SCBs aborted
ahc1: Selection Timeout on A:11. 0 SCBs aborted
ahc0: Selection Timeout on A:13. 0 SCBs aborted
ahc1: Selection Timeout on A:13. 0 SCBs aborted
ahc0: Selection Timeout on A:14. 0 SCBs aborted
ahc1: Selection Timeout on A:14. 0 SCBs aborted
(probe15:ahc1:0:0:0): Retrying Command
(ahc1:A:0:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2
(ahc1:A:0:0): Received PPR width 1, period 9, offset 3f,options 2
Filtered to width 1, period 9, offset 3f, options 2
ahc1: target 0 using 16bit transfers
ahc1: target 0 synchronous at 80.0MHz DT, offset = 0x3f
ahc0: Selection Timeout on A:15. 0 SCBs aborted
pass0 at ahc1 bus 0 target 0 lun 0
pass0: <SEAGATE ST336753LC 0005> Fixed Direct Access SCSI-3 device
pass0: Serial Number 3HX0YW7G000074461N3S
pass0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged
Queueing Enabled
da0 at ahc1 bus 0 target 0 lun 0
da0: <SEAGATE ST336753LC 0005> Fixed Direct Access SCSI-3 device
da0: Serial Number 3HX0YW7G000074461N3S
da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged
Queueing Enabled
da0: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C)
GEOM: new disk da0
SMP: AP CPU #2 Launched!
cpu2 AP:
ID: 0x02000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
SMP: AP CPU #3 Launched!
cpu3 AP:
ID: 0x03000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
INTR: Assigning IRQ 1 to local APIC 0
ioapic0: Assigning ISA IRQ 1 to local APIC 0
INTR: Assigning IRQ 4 to local APIC 2
ioapic0: Assigning ISA IRQ 4 to local APIC 2
INTR: Assigning IRQ 6 to local APIC 0
ioapic0: Assigning ISA IRQ 6 to local APIC 0
INTR: Assigning IRQ 9 to local APIC 2
ioapic0: Assigning ISA IRQ 9 to local APIC 2
INTR: Assigning IRQ 14 to local APIC 0
ioapic0: Assigning ISA IRQ 14 to local APIC 0
INTR: Assigning IRQ 15 to local APIC 2
ioapic0: Assigning ISA IRQ 15 to local APIC 2
INTR: Assigning IRQ 16 to local APIC 0
ioapic0: Assigning PCI IRQ 16 to local APIC 0
INTR: Assigning IRQ 18 to local APIC 2
ioapic0: Assigning PCI IRQ 18 to local APIC 2
INTR: Assigning IRQ 19 to local APIC 0
ioapic0: Assigning PCI IRQ 19 to local APIC 0
INTR: Assigning IRQ 23 to local APIC 2
ioapic0: Assigning PCI IRQ 23 to local APIC 2
Trying to mount root from ufs:/dev/da0s1a
start_init: trying /sbin/init
Linux ELF exec handler installed
linprocfs registered
em0: Link is Down
em0: Link is up 100 Mbps Full Duplex
verbose 4.11 dmesg
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.11-RELEASE-p8 #0: Mon Aug 7 08:43:21 MDT 2006
root@:/usr/obj/u/frii/src/FreeBSD-4.11-RELEASE/sys/WEBFARM-TMP
Calibrating clock(s) ... TSC clock: 1982700456 Hz, i8254 clock: 1193292 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Intel(R) XEON(TM) CPU 2.00GHz (1982.53-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf24 Stepping = 4
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
Hyperthreading: 2 logical CPUs
real memory = 2147483648 (2097152K bytes)
Physical memory chunk(s):
0x000001000 - 0x00009efff, 647168 bytes (158 pages)
0x00039b000 - 0x07fff7fff, 2143670272 bytes (523357 pages)
avail memory = 2088013824 (2039076K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
SMP: CPU0 apic_initialize():
lint0: 0x00000700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
FreeBSD/SMP: Multiprocessor motherboard: 4 CPUs
cpu0 (BSP): apic id: 0, version: 0x00050014, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00050014, at 0xfee00000
cpu2 (AP): apic id: 2, version: 0x00050014, at 0xfee00000
cpu3 (AP): apic id: 3, version: 0x00050014, at 0xfee00000
io0 (APIC): apic id: 4, version: 0x00178020, at 0xfec00000
bios32: Found BIOS32 Service Directory header at 0xc00faee0
bios32: Entry = 0xfb370 (c00fb370) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xb3a0
pnpbios: Found PnP BIOS data at 0xc00fbe10
pnpbios: Entry = f0000:be40 Rev = 1.0
Other BIOS signatures found:
ACPI: 000f6be0
Preloaded elf kernel "kernel" at 0xc0371000.
Warning: Pentium 4 CPU: PSE disabled
Pentium Pro MTRR support enabled
Creating DISK md0
md0: Malloc disk
Math emulator present
SMP: CPU0 bsp_apic_configure():
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=25318086)
Using $PIR table, 9 entries at 0xc00fded0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
found-> vendor=0x8086, dev=0x2531, revid=0x04
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base f0000000, size 26
found-> vendor=0x8086, dev=0x2532, revid=0x04
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=1 secondarybus=1
found-> vendor=0x8086, dev=0x2533, revid=0x04
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=3 secondarybus=2
found-> vendor=0x8086, dev=0x244e, revid=0x04
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=4 secondarybus=4
found-> vendor=0x8086, dev=0x2440, revid=0x04
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x244b, revid=0x04
class=01-01-80, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[20]: type 1, range 32, base 0000f000, size 4
IOAPIC #0 intpin 19 -> irq 2
Freeing (NOT implemented) redirected PCI irq 5.
found-> vendor=0x8086, dev=0x2442, revid=0x04
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=d, irq=2
map[20]: type 1, range 32, base 0000b000, size 5
IOAPIC #0 intpin 17 -> irq 5
Freeing (NOT implemented) redirected PCI irq 7.
found-> vendor=0x8086, dev=0x2443, revid=0x04
class=0c-05-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=b, irq=5
map[20]: type 1, range 32, base 00000500, size 4
IOAPIC #0 intpin 23 -> irq 7
Freeing (NOT implemented) redirected PCI irq 12.
found-> vendor=0x8086, dev=0x2444, revid=0x04
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=c, irq=7
map[20]: type 1, range 32, base 0000b800, size 5
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=8086 device=2532)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pcib2: <PCI to PCI bridge (vendor=8086 device=2533)> at device 2.0 on pci0
found-> vendor=0x8086, dev=0x1360, revid=0x03
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=3 secondarybus=3
pci2: <PCI bus> on pcib2
pcib3: <PCI to PCI bridge (vendor=8086 device=1360)> at device 31.0 on pci2
found-> vendor=0x8086, dev=0x1161, revid=0x01
class=08-00-20, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
IOAPIC #0 intpin 18 -> irq 10
Freeing (NOT implemented) redirected PCI irq 11.
found-> vendor=0x9005, dev=0x00cf, revid=0x01
class=01-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base 00009000, size 8
map[14]: type 1, range 64, base f5000000, size 12
Freeing (NOT implemented) redirected PCI irq 11.
found-> vendor=0x9005, dev=0x00cf, revid=0x01
class=01-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=b, irq=10
map[10]: type 1, range 32, base 00009400, size 8
map[14]: type 1, range 64, base f5002000, size 12
pci3: <PCI bus> on pcib3
pci3: <unknown card> (vendor=0x8086, dev=0x1161) at 0.0
ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x9000-0x90ff mem
0xf5000000-0xf5000fff irq 10 at device 4.0 on pci3
ahc0: Defaulting to MEMIO off
ahc0: Reading SEEPROM...done.
ahc0: Manual SE Termination
ahc0: Manual LVD Termination
ahc0: BIOS eeprom is present
ahc0: Secondary High byte termination Enabled
ahc0: Secondary Low byte termination Enabled
ahc0: Primary Low Byte termination Enabled
ahc0: Primary High Byte termination Enabled
ahc0: Downloading Sequencer Program... 423 instructions downloaded
ahc0: Features 0x1fef6, Bugs 0x40, Flags 0x28485560
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x9400-0x94ff mem
0xf5002000-0xf5002fff irq 10 at device 4.1 on pci3
ahc1: Defaulting to MEMIO off
ahc1: Reading SEEPROM...done.
ahc1: Manual SE Termination
ahc1: Manual LVD Termination
ahc1: BIOS eeprom is present
ahc1: Secondary High byte termination Enabled
ahc1: Secondary Low byte termination Enabled
ahc1: Primary Low Byte termination Enabled
ahc1: Primary High Byte termination Enabled
ahc1: Downloading Sequencer Program... 423 instructions downloaded
ahc1: Features 0x1fef6, Bugs 0x40, Flags 0x20485560
using shared irq10.
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
pcib4: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
Freeing (NOT implemented) redirected PCI irq 11.
found-> vendor=0x8086, dev=0x1076, revid=0x00
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base f8120000, size 17
map[14]: type 1, range 32, base f8100000, size 17
map[18]: type 1, range 32, base 0000a000, size 6
IOAPIC #0 intpin 16 -> irq 11
Freeing (NOT implemented) redirected PCI irq 10.
found-> vendor=0x8086, dev=0x1229, revid=0x08
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base f8140000, size 12
map[14]: type 1, range 32, base 0000a400, size 6
map[18]: type 1, range 32, base f8000000, size 20
Freeing (NOT implemented) redirected PCI irq 10.
found-> vendor=0x1002, dev=0x4752, revid=0x27
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base f7000000, size 24
map[14]: type 1, range 32, base 0000a800, size 8
map[18]: type 1, range 32, base f8141000, size 12
pci4: <PCI bus> on pcib4
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.42> port
0xa000-0xa03f mem 0xf8100000-0xf811ffff,0xf8120000-0xf813ffff irq 10 at
device 2.0 on pci4
bpf: em0 attached
em0: Speed:N/A Duplex:N/A
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xa400-0xa43f mem
0xf8000000-0xf80fffff,0xf8140000-0xf8140fff irq 11 at device 4.0 on pci4
fxp0: using memory space register mapping
fxp0: Ethernet address 00:30:48:22:6e:3e
fxp0: PCI IDs: 8086 1229 8086 100c 0008
fxp0: Dynamic Standby mode is disabled
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: fxp0 attached
pci4: <ATI Mach64-GR graphics accelerator> (vendor=0x1002, dev=0x4752)
at 7.0 irq 11
isab0: <Intel 82801BA/BAM (ICH2) PCI to LPC bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
pci0: <Unknown PCI ATA controller> (vendor=0x8086, dev=0x244b) at 31.1
pci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> (vendor=0x8086,
dev=0x2442) at 31.2 irq 2
pci0: <unknown card> (vendor=0x8086, dev=0x2443) at 31.3 irq 5
pci0: <Intel 82801BA/BAM (ICH2) USB controller USB-B> (vendor=0x8086,
dev=0x2444) at 31.4 irq 7
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0067
psm0: failed to reset the aux device.
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: irq maps: 0x41 0x41 0x41 0x41
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: irq maps: 0x41 0x41 0x41 0x41
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
isa_probe_children: probing PnP devices
SMP: enabled INTs: 1, 4, 6, 10, 11, apic_imen: 0x00fff3ad
BIOS Geometries:
0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
bpf: lo0 attached
bpf: ppp0 attached
new masks: bio 68000040, tty 63000012, net 67000c12
bpf: sl0 attached
bpf: faith0 attached
IP packet filtering initialized, divert enabled, rule-based forwarding
enabled, default to accept, unlimited logging
IP Filter: v3.4.35 initialized. Default = pass all, Logging = enabled
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
(noperiph:ahc1:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
SMP: AP CPU #2 Launched!
SMP: CPU2 apic_initialize():
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff
SMP: AP CPU #1 Launched!
SMP: CPU1 apic_initialize():
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff
SMP: AP CPU #3 Launched!
SMP: CPU3 apic_initialize():
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff
em0: Link is up 100 Mbps Half Duplex
(ahc1:A:0:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2
(ahc1:A:0:0): Received PPR width 1, period 9, offset 7f,options 2
Filtered to width 1, period 9, offset 7f, options 2
ahc1: target 0 using 16bit transfers
ahc1: target 0 synchronous at 80.0MHz DT, offset = 0x7f
Creating DISK da0
pass0 at ahc1 bus 0 target 0 lun 0
pass0: <MAXTOR ATLASU320_18_SCA B430> Fixed Direct Access SCSI-3 device
pass0: Serial Number 342308010283
pass0: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged
Queueing Enabled
da0 at ahc1 bus 0 target 0 lun 0
da0: <MAXTOR ATLASU320_18_SCA B430> Fixed Direct Access SCSI-3 device
da0: Serial Number 342308010283
da0: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged
Queueing Enabled
da0: 17537MB (35916548 512 byte sectors: 255H 63S/T 2235C)
Mounting root from ufs:/dev/da0s1a
da0s1: type 0xa5, start 63, end = 35905274, size 35905212 : OK
start_init: trying /sbin/init
--
---
Steven H. Baeighkley - Systems Administrator
Front Range Internet, Inc.
stevenb at frii.com - (970) 212-0756
More information about the freebsd-performance
mailing list