packet drop with intel gigabit / marwell gigabit
OxY
oxy at field.hu
Sat Mar 18 13:23:13 UTC 2006
currently i use HZ=2000
here's the output of netstat -i, -s, and vmstat -i :
(currently i am uploading on the gigabit with ftp, 3 threads)
Field root# vmstat -i
interrupt total rate
irq0: clk 27503959 1993
irq1: atkbd0 1 0
irq3: fxp0 2 0
irq7: 146 0
stray irq7 146 0
irq8: rtc 1765569 127
irq10: atapci1 2807786 203
irq11: atapci0 475039 34
irq13: npx0 1 0
irq14: ata0 99 0
Total 32552748 2359
Field root# netstat -i
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs
Coll
fxp0 1500 <Link#1> 00:a0:c9:8d:79:68 13163545 0 21899372 1
0
fxp0 1500 195.38.96.64/ field 141 -
22056 - -
em0 1500 <Link#2> 00:0e:0c:a2:ac:42 68644181 4 66793904 0
0
em0 1500 195.38.96.64/ field 211255811 -
3903 - -
lo0 16384 <Link#3> 129622061 0 129622061 0
0
netstat -s is here:
http://field.hu/netstat.txt
----- Original Message -----
From: "Chuck Swiger" <cswiger at mac.com>
To: "OxY" <oxy at field.hu>
Cc: <freebsd-performance at freebsd.org>
Sent: Saturday, March 18, 2006 1:37 PM
Subject: Re: packet drop with intel gigabit / marwell gigabit
> OxY wrote:
>> yeah, i googled these settings, but i put them back to default then!
>> i measured iperf performance, and it showed that the packet drop is
>> depending on the system load..
>
> If you are using the normal interrupt-driven configuration, you should
> look at
> netstat -i, -s, and vmstat -i. If you're turning on device polling, you
> ought
> to retry your testing at higher HZ (try 2000 or 5000):
>
> echo 'kern.hz="2000"' >> /boot/loader.conf
>
> --
> -Chuck
More information about the freebsd-performance
mailing list