it-openoffice-1.1 package available

[guido sintoni]

dear sirs (afaik, dear martin),
i'm one of massimiliano stucchi's friends.
i upgraded my workstation from freebsd 5.1p10 to 5.2-beta and i noticed 
my previous package of openoffice 1.1 didn't work anymore.
so i made another package and it works fine.
you can download it from
www.willystudios.com/openoffice
feel free to include it in your http://projects.imp.ch/openoffice/ page, 
if you like it. formerly, i sent you (through massimiliano) the english 
and the italian version for openoffice 1.1 (freebsd-stable).

the package was built with ttf_bytecode enabled and support for gif images.


here's the kernel of the machine used to compile and to make the package:

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights reserved.
FreeBSD 5.2-BETA #0: Sun Nov 30 18:39:11 CET 2003
     guido at jill.ufficio:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a77000.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Celeron(R) CPU 1.80GHz (2015.80-MHz 686-class CPU)
   Origin = "GenuineIntel"  Id = 0xf13  Stepping = 3
 
Features=0x3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory  = 536805376 (511 MB)
avail memory = 511770624 (488 MB)
Pentium Pro MTRR support enabled
acpi0: <AMIINT SiS645XX> on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 9 entries at 0xc00f7a60
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
device_probe_and_attach: acpi_cpu1 attach returned 6
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 2 INTC is routed to irq 11
pcib0: slot 3 INTA is routed to irq 11
pcib0: slot 3 INTB is routed to irq 11
pcib0: slot 3 INTC is routed to irq 5
pcib0: slot 3 INTD is routed to irq 11
pcib0: slot 4 INTA is routed to irq 11
pcib0: slot 8 INTA is routed to irq 5
agp0: <SIS Generic host to PCI bridge> mem 0xe0000000-0xe3ffffff at 
device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pcib0: slot 1 INTA is routed to irq 5
pcib1: slot 0 INTA is routed to irq 5
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <SiS 96X UDMA133 controller> port 0xff00-0xff0f at device 2.5 
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <multimedia, audio> at device 2.7 (no driver attached)
ohci0: <SiS 5571 USB controller> mem 0xdfffc000-0xdfffcfff irq 11 at 
device 3.0
on pci0
usb0: OHCI version 1.0, legacy support
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1: <SiS 5571 USB controller> mem 0xdfffd000-0xdfffdfff irq 11 at 
device 3.1
on pci0
usb1: OHCI version 1.0, legacy support
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2: Texas Instruments TUSB2046 hub, class 9/0, rev 1.10/1.25, addr 2
uhub2: 4 ports with 4 removable, self powered
ohci2: <SiS 5571 USB controller> mem 0xdfffe000-0xdfffefff irq 5 at 
device 3.2 on pci0
usb2: OHCI version 1.0, legacy support
usb2: <usb2: USB revision 1.0
uhub3: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 3.3 (no driver attached)
sis0: <SiS 900 10/100BaseTX> port 0xd400-0xd4ff mem 
0xdfffb000-0xdfffbfff irq 11 at device 4.0 on pci0
sis0: Ethernet address: 00:0a:e6:21:28:55
miibus0: <MII bus> on sis0
rlphy0: <RTL8201L 10/100 media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fwohci0: <VIA VT6306> port 0xd000-0xd07f mem 0xdfffa800-0xdfffafff irq 5 
at device 8.0 on pci0
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channel is 8.
fwohci0: EUI64 00:11:06:00:00:00:9a:13
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:11:06:00:9a:13
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
acpi_button1: <Sleep Button> on acpi0
fdc0: cmd 3 failed at out byte 1 of 3
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
acpi_cpu1: <CPU> on acpi0
device_probe_and_attach: acpi_cpu1 attach returned 6
fdc0: cmd 3 failed at out byte 1 of 3
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
orm0: <Option ROMs> at iomem 0xd0000-0xd7fff,0xc0000-0xcffff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
fdc0: cannot reserve I/O port range (6 ports)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2015803280 Hz quality 800
Timecounters tick every 10.000 msec
GEOM: create disk ad0 dp=0xc4999760
ad0: 117246MB <Maxtor 6Y120L0> [238216/16/63] at ata0-master UDMA133
GEOM: create disk ad1 dp=0xc4999460
ad1: 38172MB <MAXTOR 6L040J2> [77557/16/63] at ata0-slave UDMA133
acd0: DVDROM <Pioneer DVD-ROM ATAPIModel DVD-119 0105> at ata1-master PIO4
acd1: CDRW <AOPEN CD-RW CRW4850 1.04 20021101> at ata1-slave PIO4

the kernel was the GENERIC.

the system was built on nov 30, 2003.
FreeBSD jill.ufficio 5.2-BETA FreeBSD 5.2-BETA #0: Sun Nov 30 18:39:11 
CET 2003     guido at jill.ufficio:/usr/obj/usr/src/sys/GENERIC  i386


cheers,
--
guido sintoni (gs at willystudios.com)
freelance journalist powered by *bsd
free for fun (www.freebsd.org)
open for masochism (www.openbsd.org)
net for... what is net? :) (www.netbsd.org)




-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 187 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-openoffice/attachments/20031204/af1b4357/attachment.bin