Cas driver fails to load first time after boot.
Paul Keusemann
pkeusem at visi.com
Mon Jan 28 17:15:21 UTC 2013
On 01/25/13 17:34, Marius Strobl wrote:
> On Fri, Jan 25, 2013 at 01:14:51PM -0600, Paul Keusemann wrote:
>> On 01/25/13 10:19, Marius Strobl wrote:
>>> On Thu, Jan 24, 2013 at 08:48:04PM -0600, Paul Keusemann wrote:
>>>> On 01/24/13 15:50, Marius Strobl wrote:
>>>>> On Thu, Jan 24, 2013 at 12:39:44PM -0600, Paul Keusemann wrote:
>>>>>> On 01/24/13 09:09, Marius Strobl wrote:
>>>>>>> On Tue, Jan 22, 2013 at 02:46:48PM -0600, Paul Keusemann wrote:
>>>>>>>> Hi,
>>>>>>>>
>>>>>>>> I've got a Dell R200 which I'm trying to build into a gateway with a Sun
>>>>>>>> QGE (501-6738-10). The cas driver fails to load the first time I try to
>>>>>>>> load it but succeeds the second time. Is this a problem with the card,
>>>>>>>> the driver, my karma?
>>>>>>> Wrong phase of the moon, apparently :)
>>>>>>> The MII setup of these chips is a bit tricky and I'm not sure whether
>>>>>>> I've hit all code paths during development of the driver. I certainly
>>>>>>> didn't test with a 501-6738, these have been reported as working before,
>>>>>>> though. It also doesn't make much sense that attaching the devices
>>>>>>> succeeds on the second attempt. Could you please use a if_cas.ko built
>>>>>>> with the attached patch and report the debug output for one of the
>>>>>>> interfaces in both the working and the non-working case?
>>>>>> I would love to give you output from the working and non-working case
>>>>>> but apparently the phase of the moon has changed, I can't get it to fail
>>>>>> now. The messages output from the working case is attached.
>>>>>>
>>>>> Thanks but unfortunately this doesn't make any sense either. In general,
>>>>> printf()s cause deays which can be relevant. In the locations I've put
>>>>> them they hardly can make such a difference though.
>>>>> If you haven't already done so, could you please power off the machine
>>>>> before doing the test with the patched module? Is the problem still gone
>>>>> if you revert to the original module?
>>>> OK, power-cycling makes a difference. The driver fails to attach all of
>>>> the devices after power-cycling most of the time if not all of the
>>>> time. The number of devices attached varies, the attached message file
>>>> fragment is from my last test. Three of the devices were attached on
>>>> the first load attempt and all four of them on the second attempt.
>>> Okay, so we now at least have a way to reproduce the problem.
>>> Unfortunately, it's still unclear what's the exact cause of it. At
>>> least the problem is not what I suspected and hoped it most likely is.
>>> Could you please test how things behave after a power-cycle with the
>>> attached patche (after reverting the previous one).
>> The patched driver fails to compile with the following error message:
>>
> <...>
>
>> I found the following defintion of nitems in the iwn and usb/wlan drivers:
>>
>> #define nitems(_a) (sizeof((_a)) / sizeof((_a)[0]))
>>
>> so I added it to if_cas.c and rebuilt without errors.
>>
> Sorry, I didn't think of 8.3 not having nitems(), yet. Actually,
> this part of the patch is orthogonal to your problem and just a
> change I had in that tree.
>
>> This looks like like it fixed the problem. I ran three tests from
>> power-up to loading the driver and the driver loaded successfully all
>> three times. I then added if_cas_load="YES" to /boot/loader.conf and
>> did two more successful reboots from power-up.
> Great! Thanks a lot for testing!
>
>> Will this driver work on FreeBSD 9.1?
>>
> Yes, the patch should also solve the problem in 9.1. I suspect the
> hang you are seeing there isn't specific to cas(4) but rather a
> general regression that came in with the VIMAGE changes. Now, if
> a network device driver fails to attach during boot and tries to
> clean up by detaching and freeing the interface part at that stage
> again this causes problems. I already talked to bz@ about this and
> what I remember from his reply this is an ordering issue that is at
> least very hard to fix.
OK. I've successfully upgraded from 8.3-Release to 9.1-Release. I
stupidly powered-down the machine after the upgrade, so I had to remove
the QGE card to get it to boot 9.1 and build a custom kernel. The patch
applied cleanly, the kernel built without errors and boots from power-up
without problems. I've attached the most recent messages file, dmesg,
kldstat and ifconfig output if you're interested. The only odd thing I
noticed was that cas0 and cas3 log messages: "cannot disable RX MAC"
but cas1 and cas2 do not. I haven't actually tried any of the
interfaces yet but I assume they'll work as expected.
Let me know if there's anything further testing you'd like me to do.
Thanks so much for your help with this, it is much appreciated.
Paul
>
> Marius
>
>
--
Paul Keusemann pkeusem at visi.com
4266 Joppa Court (952) 894-7805
Savage, MN 55378
-------------- next part --------------
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.1-RELEASE #4: Mon Jan 28 09:02:45 CST 2013
toor at lucid:/usr/obj/usr/src/sys/LUCID amd64
CPU: Intel(R) Xeon(R) CPU X3210 @ 2.13GHz (2133.45-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x6fb Family = 6 Model = f Stepping = 11
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant, performance statistics
real memory = 4294967296 (4096 MB)
avail memory = 4092600320 (3903 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <DELL PE_SC3 >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
ioapic0: Changing APIC ID to 4
ioapic1: Changing APIC ID to 5
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 32-55 on motherboard
kbd1 at kbdmux0
acpi0: <DELL PE_SC3> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x5f irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib3
pcib4: <PCI-PCI bridge> at device 2.0 on pci3
pci4: <PCI bus> on pcib4
cas0: <NS DP83065 Saturn Gigabit Ethernet> mem 0xdf800000-0xdf9fffff irq 35 at device 0.0 on pci4
cas0: cannot disable RX MAC
miibus0: <MII bus> on cas0
nsgphy0: <DP83865 1000BASE-T media interface> PHY 1 on miibus0
none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
cas0: 16kB RX FIFO, 9kB TX FIFO
cas0: Ethernet address: 00:14:4f:25:ca:10
cas1: <NS DP83065 Saturn Gigabit Ethernet> mem 0xdfa00000-0xdfbfffff irq 34 at device 1.0 on pci4
miibus1: <MII bus> on cas1
nsgphy1: <DP83865 1000BASE-T media interface> PHY 1 on miibus1
none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
cas1: 16kB RX FIFO, 9kB TX FIFO
cas1: Ethernet address: 00:14:4f:25:ca:11
cas2: <NS DP83065 Saturn Gigabit Ethernet> mem 0xdfc00000-0xdfdfffff irq 33 at device 2.0 on pci4
miibus2: <MII bus> on cas2
nsgphy2: <DP83865 1000BASE-T media interface> PHY 1 on miibus2
none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
cas2: 16kB RX FIFO, 9kB TX FIFO
cas2: Ethernet address: 00:14:4f:25:ca:12
cas3: <NS DP83065 Saturn Gigabit Ethernet> mem 0xdfe00000-0xdfffffff irq 32 at device 3.0 on pci4
cas3: cannot disable RX MAC
miibus3: <MII bus> on cas3
nsgphy3: <DP83865 1000BASE-T media interface> PHY 1 on miibus3
none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
cas3: 16kB RX FIFO, 9kB TX FIFO
cas3: Ethernet address: 00:14:4f:25:ca:13
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci5: <ACPI PCI bus> on pcib5
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x004201> mem 0xdf3f0000-0xdf3fffff irq 16 at device 0.0 on pci5
bge0: CHIP ID 0x00004201; ASIC REV 0x04; CHIP REV 0x42; PCI-E
miibus4: <MII bus> on bge0
brgphy0: <BCM5750 1000BASE-T media interface> PHY 1 on miibus4
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Ethernet address: 00:19:b9:fa:82:51
pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
pci6: <ACPI PCI bus> on pcib6
bge1: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x004201> mem 0xdf4f0000-0xdf4fffff irq 17 at device 0.0 on pci6
bge1: CHIP ID 0x00004201; ASIC REV 0x04; CHIP REV 0x42; PCI-E
miibus5: <MII bus> on bge1
brgphy1: <BCM5750 1000BASE-T media interface> PHY 1 on miibus5
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge1: Ethernet address: 00:19:b9:fa:82:52
uhci0: <Intel 82801I (ICH9) USB controller> port 0xdc60-0xdc7f irq 21 at device 29.0 on pci0
usbus0 on uhci0
uhci1: <Intel 82801I (ICH9) USB controller> port 0xdc80-0xdc9f irq 20 at device 29.1 on pci0
usbus1 on uhci1
uhci2: <Intel 82801I (ICH9) USB controller> port 0xdca0-0xdcbf irq 21 at device 29.2 on pci0
usbus2 on uhci2
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xdf2ffc00-0xdf2fffff irq 21 at device 29.7 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci0
pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci7: <ACPI PCI bus> on pcib7
vgapci0: <VGA-compatible display> port 0xec00-0xecff mem 0xd0000000-0xd7ffffff,0xdf5f0000-0xdf5fffff irq 19 at device 5.0 on pci7
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH9 SATA300 controller> port 0xdc30-0xdc37,0xdc28-0xdc2b,0xdc38-0xdc3f,0xdc2c-0xdc2f,0xdc40-0xdc4f,0xdc50-0xdc5f irq 23 at device 31.2 on pci0
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xc9000-0xc9fff,0xca000-0xcb7ff,0xec000-0xeffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fdc0: No FDOUT register!
ppc0: cannot reserve I/O port range
ctl: CAM Target Layer loaded
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 6 ports with 6 removable, self powered
ada0 at ata2 bus 0 scbus0 target 0 lun 0
ada0: <WDC WD800AAJS-18TDA1 01.00A04> ATA-7 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada0: 76293MB (156250000 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
cd0 at ata2 bus 0 scbus0 target 1 lun 0
cd0: <TEAC DVD-ROM DV28EV D.AE> Removable CD-ROM SCSI-0 device
cd0: 150.000MB/s transfers (SATA 1.x, UDMA2, ATAPI 12bytes, SMP: AP CPU #2 Launched!
PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
Timecounter "TSC-low" frequency 16667601 Hz quality 1000
Root mount waiting for: usbus3
ugen3.2: <vendor 0x04b4> at usbus3
uhub4: <vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.0b, addr 2> on usbus3
uhub4: MTT enabled
uhub4: 4 ports with 4 removable, self powered
Trying to mount root from ufs:/dev/ad4s1a [rw]...
bge0: link state changed to UP
-------------- next part --------------
cas0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=b<RXCSUM,TXCSUM,VLAN_MTU>
ether 00:14:4f:25:ca:10
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect
cas1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=b<RXCSUM,TXCSUM,VLAN_MTU>
ether 00:14:4f:25:ca:11
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect
cas2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=b<RXCSUM,TXCSUM,VLAN_MTU>
ether 00:14:4f:25:ca:12
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect
cas3: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=b<RXCSUM,TXCSUM,VLAN_MTU>
ether 00:14:4f:25:ca:13
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8009b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,LINKSTATE>
ether 00:19:b9:fa:82:51
inet 172.16.175.221 netmask 0xffffff00 broadcast 172.16.175.255
inet6 fe80::219:b9ff:fefa:8251%bge0 prefixlen 64 scopeid 0x5
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
bge1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8009b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,LINKSTATE>
ether 00:19:b9:fa:82:52
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet autoselect (none)
status: no carrier
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0xb
inet 127.0.0.1 netmask 0xff000000
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
-------------- next part --------------
Id Refs Address Size Name
1 1 0xffffffff80200000 1323488 kernel (/boot/kernel/kernel)
Contains modules:
Id Name
412 newreno
401 if_lo
389 elf64
455 elf32
390 shell
364 pseudofs
402 if_tun
321 uether
400 if_gif
403 if_vlan
398 if_faith
413 mld
411 igmp
394 sysvmsg
395 sysvsem
396 sysvshm
415 nfssvc
359 nfscommon
362 nfsd
420 krpc
416 nfslockd
357 devfs
363 procfs
421 ufs
388 cd9660
360 nfs
358 msdosfs
361 nfscl
9 cbb
10 cbr
1 cam
63 ata
15 ses
8 ada
373 g_part_mbr
372 g_part_gpt
371 g_part_ebr
370 g_part_bsd
317 uhub/rue
14 sa
13 pass
5 probe
137 pci/fxp
7 ch
4 pmp
12 da
6 cd
2 xpt
11 ctl
110 pci/dc
355 pci/xl
3 aprobe
79 pci/ata_intel
266 pci/snd_hda
78 pci/ata_highpoint
477 root/nexus
476 nexus/ram
475 isa/sysresource
265 hdacc/snd_hda
264 hdaa/snd_hda_pcm
263 pci/snd_via8233
262 pci/snd_ich
261 pci/snd_es137x
260 emu10kx/snd_emu10kx_midi
259 emu10kx/snd_emu10kx_pcm
474 pci/ioapic
473 nexus/apic
258 pci/snd_emu10kx
257 csa/snd_csapcm
472 nexus/qpi
471 qpi/pcib
256 pci/snd_csa
470 legacy/pcib
469 isa/pcibus_pnp
468 isa/orm
467 isa/atdma
466 acpi/atdma
465 legacy/isa
255 pci/snd_cmi
464 isa/attimer
463 acpi/attimer
462 isa/atrtc
461 acpi/atrtc
460 cpu/p4tcc
459 cpu/hwpstate
77 pci/ata_cyrix
254 pccard/sn
458 cpu/est
457 cpu/powernow
253 isa/sn
121 pci/lem
252 pci/skc
251 skc/sk
250 sk/miibus
249 pci/sis
248 sis/miibus
76 pci/ata_cypress
247 pci/siis
246 siis/siisch
245 pci/sge
244 sge/miibus
243 pci/sf
242 sf/miibus
75 pci/ata_cenatek
35 acpi/acpi_smbat
74 pci/ata_ati
454 isa/vga
453 vgapci/vgapm
452 isa/sc
73 pci/ata_amd
451 pci/isci
450 scrndr-vga
449 scterm-scteken
241 pci/re
240 re/miibus
72 pci/ata_adaptec
448 pci/nfe
447 nfe/miibus
446 pci/hptrr
445 pci/hptmv
444 pccard/fdc
443 isa/fdc
442 acpi/fdc
441 fdc/fd
440 io
391 cpu/cpufreq
439 vesa
239 random
438 isa/ed
238 pci/ral
237 pci/puc
437 atkbdc/psm
436 isa/psmcpnp
435 acpi/psmcpnp
236 pccard/puc
434 isa/atkbdc
433 acpi/atkbdc
432 atkbdc/atkbd
431 pci/arcmsr
430 hostb/agp_via
429 hostb/agp_intel
428 vgapci/agp_i810
427 hostb/agp_amd64
71 pci/ata_ali
235 pty
234 puc/ppc
233 pci/ppc
232 isa/ppc
231 acpi/ppc
230 ppbus/ppi
70 pci/ata_acard
229 ppc/ppbus
228 ppbus/lpt
69 pci/ata_ahci
426 nexus/legacy
425 legacy/cpu
424 acpi/fpupnp
227 ppbus/plip
226 pci/pcn
225 pcn/miibus
68 atapci/ata_ahci_ata
387 isab/isa
423 root/nexus_acpi
386 eisab/isa
224 pci/vgapci
223 pci/pcib
222 pcib/pci
120 pci/em
34 acpi/acpi_sysresource
67 pci/atapci
66 atapci/ata
65 isa/ata
64 pccard/ata
23 acpi/acpi_cmbat
22 acpi/acpi_button
221 pci/isab
220 pci/ignore_pci
219 pci/hostb
218 pci/fixup_pci
217 pci/cbb
16 aac/aacp
33 cpu/acpi_perf
216 isa/cbb
62 pci/an
61 pccard/an
119 pci/ed
118 pccard/ed
117 ed/miibus
116 pci/dpt
215 pcic/pccard
214 cbb/pccard
213 null
212 pci/nge
211 nge/miibus
210 pci/mwl
115 pci/de
114 dcons
60 isa/an
113 firewire/dcons_crom
112 miibus/pnphy
111 miibus/dcphy
209 pci/mvs
109 dc/miibus
208 mvs/mvsch
207 sata/mvsch
108 pccard/cs
107 isa/cs
21 acpi/acpi_acad
206 pci/mskc
205 mskc/msk
204 msk/miibus
59 pci/amr
106 cpu/ichss
58 amr/amrd
201 pci/mpt
105 pci/ciss
32 pci/acpi_pcib
31 acpi/acpi_pcib
25 acpi/acpi_ec
57 pci/ale
198 pci/mps
104 pci/cas
197 pci/mly
196 pci/mlx
195 mlx/mlxd
194 miibus/xmphy
193 miibus/ukphy
192 miibus/truephy
191 miibus/tlphy
419 pci/rl
418 cardbus/rl
417 rl/miibus
190 miibus/tdkphy
189 miibus/smcphy
188 miibus/rlphy
187 miibus/rgephy
186 miibus/rdcphy
414 nfslock
185 miibus/qsphy
184 miibus/pnaphy
183 miibus/nsphyter
182 miibus/nsphy
181 miibus/nsgphy
180 miibus/mlphy
179 miibus/lxtphy
178 miibus/jmphy
177 miibus/ip1000phy
176 miibus/icsphy
175 miibus/gentbi
174 miibus/e1000phy
173 miibus/ciphy
172 miibus/brgphy
171 miibus/bmtphy
170 miibus/axphy
169 miibus/atphy
168 miibus/amphy
167 miibus/acphy
166 mfi/mfisyspd
165 mfi/mfid
164 pci/mfi
103 cas/miibus
56 ale/miibus
19 pci/aac
102 cbb/cardbus
101 pci/bxe
18 pci/aacch
163 mem
55 pci/alc
54 alc/miibus
53 ahc
52 ahd
161 pci/malo
51 pci/ahd
50 pci/ahc_pci
49 isa/ahc_isa
100 pci/bt
99 isa/bt
160 pci/lge
159 lge/miibus
98 pci/bge
356 miibus/xlphy
354 xl/miibus
353 pccard/xe
352 pci/wpi
351 pci/wi
350 pccard/wi
349 pci/wb
348 wb/miibus
347 watchdog
346 pci/vx
345 pci/vr
344 vr/miibus
158 pci/le
343 pci/vge
342 vge/miibus
97 bge/miibus
341 uhub/ums
157 kbdmux
48 pccard/aic
340 uhub/ukbd
339 uhub/uhid
96 pci/bfe
156 pci/jme
155 jme/miibus
154 pci/ixv
338 uhub/uvscom
337 uhub/uvisor
336 uhub/uslcom
335 uhub/uplcom
334 uhub/ulpt
333 uhub/uipaq
332 uhub/uftdi
331 uhub/ubsa
330 uhub/uark
329 uhub/u3g
328 uhub/zyd
95 bfe/miibus
327 uhub/urtw
326 uhub/ural
325 uhub/if_upgt
94 pci/bce
324 uhub/uath
323 uhub/run
322 uhub/rum
320 miibus/ruephy
319 uhub/udav
318 udav/miibus
316 rue/miibus
315 uhub/kue
314 uhub/cue
313 uhub/cdce
312 uhub/axe
311 axe/miibus
310 uhub/aue
309 aue/miibus
93 bce/miibus
30 acpi/acpi_pci_link
24 acpi/cpu
308 usbus/uhub
307 uhub/uhub
47 pci/ahci
153 pci/ixgbe
46 atapci/ahci
45 ahci/ahcich
29 pcib/acpi_pci
20 nexus/acpi
28 acpi/acpi_lid
44 pci/age
43 age/miibus
42 pci/ae
306 uhub/usb_linux
305 uhub/urio
152 pci/iwn
304 uhub/umass
151 pci/iwi
150 pci/isp
149 pci/ipw
303 ohci/usbus
302 uhci/usbus
301 ehci/usbus
300 xhci/usbus
299 at91_udp/usbus
298 musbotg/usbus
297 uss820/usbus
296 pci/xhci
148 pci/ips
295 pci/uhci
147 ips/ipsd
41 ae/miibus
294 pci/ohci
146 pci/iir
293 pci/ehci
27 acpi/acpi_isab
145 pci/ida
144 ida/idad
143 pci/hptiop
142 pci/hme
292 puc/uart
291 pci/uart
290 pccard/uart
289 isa/uart
288 acpi/uart
141 hme/miibus
287 pci/txp
286 pci/tx
285 tx/miibus
140 pci/gem
139 gem/miibus
138 miibus/inphy
284 pci/tws
136 fxp/miibus
40 pci/adw
283 pci/twe
282 twe/twed
39 pci/adv
135 firewire/fwip
281 pci/twa
280 pci/trm
279 pci/tl
278 tl/miibus
277 pci/ti
38 acpi/acpi_timer
37 cpu/acpi_throttle
276 pci/sym
275 pci/stge
274 stge/miibus
273 pci/ste
272 ste/miibus
36 acpi/acpi_tz
271 midi
270 uaudio/ua_pcm
17 aac/aacd
134 firewire/fwe
133 pci/fwohci
269 uhub/uaudio
92 pci/ath_pci
91 pci/ata_via
90 pci/ata_sis
268 sound
89 pci/ata_sii
132 fwohci/firewire
131 pccard/fe
130 exca
129 pccard/ex
128 isa/ex
127 pci/esp
126 pccard/ep
125 isa/ep
88 pci/ata_serverworks
124 pci/et
123 et/miibus
87 pci/ata_promise
26 acpi/hpet
86 pci/ata_nvidia
85 pci/ata_netcell
122 pci/igb
84 pci/ata_national
83 pci/ata_micron
82 pci/ata_marvell
81 pci/ata_jmicron
80 pci/ata_ite
267 hdac/snd_hda
202 mpt_raid
374 g_raid
378 g_raid_md_nvidia
203 mpt_user
380 g_raid_md_sii
377 g_raid_md_jmicron
375 g_raid_md_ddf
379 g_raid_md_promise
200 mpt_cam
376 g_raid_md_intel
393 firmware
381 g_raid_tr_concat
408 wlan
407 wlan_wep
406 wlan_tkip
405 wlan_ccmp
199 mpt_core
404 wlan_amrr
422 g_class
384 g_raid_tr_raid1e
369 g_part
368 g_label
392 rootbus
367 g_vfs
162 g_md
383 g_raid_tr_raid1
366 g_disk
385 g_raid_tr_raid5
410 wlan_sta
365 g_dev
409 wlan_ratectl_none
382 g_raid_tr_raid0
399 if_firewire
397 ether
456 x86bios
-------------- next part --------------
Jan 28 11:04:05 lucid kernel: Copyright (c) 1992-2012 The FreeBSD Project.
Jan 28 11:04:05 lucid kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
Jan 28 11:04:05 lucid kernel: The Regents of the University of California. All rights reserved.
Jan 28 11:04:05 lucid kernel: FreeBSD is a registered trademark of The FreeBSD Foundation.
Jan 28 11:04:05 lucid kernel: FreeBSD 9.1-RELEASE #4: Mon Jan 28 09:02:45 CST 2013
Jan 28 11:04:05 lucid kernel: toor at lucid:/usr/obj/usr/src/sys/LUCID amd64
Jan 28 11:04:05 lucid kernel: CPU: Intel(R) Xeon(R) CPU X3210 @ 2.13GHz (2133.45-MHz K8-class CPU)
Jan 28 11:04:05 lucid kernel: Origin = "GenuineIntel" Id = 0x6fb Family = 6 Model = f Stepping = 11
Jan 28 11:04:05 lucid kernel: Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Jan 28 11:04:05 lucid kernel: Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
Jan 28 11:04:05 lucid kernel: AMD Features=0x20100800<SYSCALL,NX,LM>
Jan 28 11:04:05 lucid kernel: AMD Features2=0x1<LAHF>
Jan 28 11:04:05 lucid kernel: TSC: P-state invariant, performance statistics
Jan 28 11:04:05 lucid kernel: real memory = 4294967296 (4096 MB)
Jan 28 11:04:05 lucid kernel: avail memory = 4092600320 (3903 MB)
Jan 28 11:04:05 lucid kernel: Event timer "LAPIC" quality 400
Jan 28 11:04:05 lucid kernel: ACPI APIC Table: <DELL PE_SC3 >
Jan 28 11:04:05 lucid kernel: FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
Jan 28 11:04:05 lucid kernel: FreeBSD/SMP: 1 package(s) x 4 core(s)
Jan 28 11:04:05 lucid kernel: cpu0 (BSP): APIC ID: 0
Jan 28 11:04:05 lucid kernel: cpu1 (AP): APIC ID: 1
Jan 28 11:04:05 lucid kernel: cpu2 (AP): APIC ID: 2
Jan 28 11:04:05 lucid kernel: cpu3 (AP): APIC ID: 3
Jan 28 11:04:05 lucid kernel: ioapic0: Changing APIC ID to 4
Jan 28 11:04:05 lucid kernel: ioapic1: Changing APIC ID to 5
Jan 28 11:04:05 lucid kernel: ioapic0 <Version 2.0> irqs 0-23 on motherboard
Jan 28 11:04:05 lucid kernel: ioapic1 <Version 2.0> irqs 32-55 on motherboard
Jan 28 11:04:05 lucid kernel: kbd1 at kbdmux0
Jan 28 11:04:05 lucid kernel: acpi0: <DELL PE_SC3> on motherboard
Jan 28 11:04:05 lucid kernel: acpi0: Power Button (fixed)
Jan 28 11:04:05 lucid kernel: cpu0: <ACPI CPU> on acpi0
Jan 28 11:04:05 lucid kernel: cpu1: <ACPI CPU> on acpi0
Jan 28 11:04:05 lucid kernel: cpu2: <ACPI CPU> on acpi0
Jan 28 11:04:05 lucid kernel: cpu3: <ACPI CPU> on acpi0
Jan 28 11:04:05 lucid kernel: atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0
Jan 28 11:04:05 lucid kernel: Event timer "RTC" frequency 32768 Hz quality 0
Jan 28 11:04:05 lucid kernel: attimer0: <AT timer> port 0x40-0x5f irq 0 on acpi0
Jan 28 11:04:05 lucid kernel: Timecounter "i8254" frequency 1193182 Hz quality 0
Jan 28 11:04:05 lucid kernel: Event timer "i8254" frequency 1193182 Hz quality 100
Jan 28 11:04:05 lucid kernel: hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Jan 28 11:04:05 lucid kernel: Timecounter "HPET" frequency 14318180 Hz quality 950
Jan 28 11:04:05 lucid kernel: Event timer "HPET" frequency 14318180 Hz quality 450
Jan 28 11:04:05 lucid kernel: Event timer "HPET1" frequency 14318180 Hz quality 440
Jan 28 11:04:05 lucid kernel: Event timer "HPET2" frequency 14318180 Hz quality 440
Jan 28 11:04:05 lucid kernel: Event timer "HPET3" frequency 14318180 Hz quality 440
Jan 28 11:04:05 lucid kernel: Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
Jan 28 11:04:05 lucid kernel: acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
Jan 28 11:04:05 lucid kernel: pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
Jan 28 11:04:05 lucid kernel: pci0: <ACPI PCI bus> on pcib0
Jan 28 11:04:05 lucid kernel: pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
Jan 28 11:04:05 lucid kernel: pci1: <ACPI PCI bus> on pcib1
Jan 28 11:04:05 lucid kernel: pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
Jan 28 11:04:05 lucid kernel: pci2: <ACPI PCI bus> on pcib2
Jan 28 11:04:05 lucid kernel: pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci2
Jan 28 11:04:05 lucid kernel: pci3: <ACPI PCI bus> on pcib3
Jan 28 11:04:05 lucid kernel: pcib4: <PCI-PCI bridge> at device 2.0 on pci3
Jan 28 11:04:05 lucid kernel: pci4: <PCI bus> on pcib4
Jan 28 11:04:05 lucid kernel: cas0: <NS DP83065 Saturn Gigabit Ethernet> mem 0xdf800000-0xdf9fffff irq 35 at device 0.0 on pci4
Jan 28 11:04:05 lucid kernel: cas0: cannot disable RX MAC
Jan 28 11:04:05 lucid kernel: miibus0: <MII bus> on cas0
Jan 28 11:04:05 lucid kernel: nsgphy0: <DP83865 1000BASE-T media interface> PHY 1 on miibus0
Jan 28 11:04:05 lucid kernel: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
Jan 28 11:04:05 lucid kernel: cas0: 16kB RX FIFO, 9kB TX FIFO
Jan 28 11:04:05 lucid kernel: cas0: Ethernet address: 00:14:4f:25:ca:10
Jan 28 11:04:05 lucid kernel: cas1: <NS DP83065 Saturn Gigabit Ethernet> mem 0xdfa00000-0xdfbfffff irq 34 at device 1.0 on pci4
Jan 28 11:04:05 lucid kernel: miibus1: <MII bus> on cas1
Jan 28 11:04:05 lucid kernel: nsgphy1: <DP83865 1000BASE-T media interface> PHY 1 on miibus1
Jan 28 11:04:05 lucid kernel: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
Jan 28 11:04:05 lucid kernel: cas1: 16kB RX FIFO, 9kB TX FIFO
Jan 28 11:04:05 lucid kernel: cas1: Ethernet address: 00:14:4f:25:ca:11
Jan 28 11:04:05 lucid kernel: cas2: <NS DP83065 Saturn Gigabit Ethernet> mem 0xdfc00000-0xdfdfffff irq 33 at device 2.0 on pci4
Jan 28 11:04:05 lucid kernel: miibus2: <MII bus> on cas2
Jan 28 11:04:05 lucid kernel: nsgphy2: <DP83865 1000BASE-T media interface> PHY 1 on miibus2
Jan 28 11:04:05 lucid kernel: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
Jan 28 11:04:05 lucid kernel: cas2: 16kB RX FIFO, 9kB TX FIFO
Jan 28 11:04:05 lucid kernel: cas2: Ethernet address: 00:14:4f:25:ca:12
Jan 28 11:04:05 lucid kernel: cas3: <NS DP83065 Saturn Gigabit Ethernet> mem 0xdfe00000-0xdfffffff irq 32 at device 3.0 on pci4
Jan 28 11:04:05 lucid kernel: cas3: cannot disable RX MAC
Jan 28 11:04:05 lucid kernel: miibus3: <MII bus> on cas3
Jan 28 11:04:05 lucid kernel: nsgphy3: <DP83865 1000BASE-T media interface> PHY 1 on miibus3
Jan 28 11:04:05 lucid kernel: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
Jan 28 11:04:05 lucid kernel: cas3: 16kB RX FIFO, 9kB TX FIFO
Jan 28 11:04:05 lucid kernel: cas3: Ethernet address: 00:14:4f:25:ca:13
Jan 28 11:04:05 lucid kernel: pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
Jan 28 11:04:05 lucid kernel: pci5: <ACPI PCI bus> on pcib5
Jan 28 11:04:05 lucid kernel: bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x004201> mem 0xdf3f0000-0xdf3fffff irq 16 at device 0.0 on pci5
Jan 28 11:04:05 lucid kernel: bge0: CHIP ID 0x00004201; ASIC REV 0x04; CHIP REV 0x42; PCI-E
Jan 28 11:04:05 lucid kernel: miibus4: <MII bus> on bge0
Jan 28 11:04:05 lucid kernel: brgphy0: <BCM5750 1000BASE-T media interface> PHY 1 on miibus4
Jan 28 11:04:05 lucid kernel: brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
Jan 28 11:04:05 lucid kernel: bge0: Ethernet address: 00:19:b9:fa:82:51
Jan 28 11:04:05 lucid kernel: pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
Jan 28 11:04:05 lucid kernel: pci6: <ACPI PCI bus> on pcib6
Jan 28 11:04:05 lucid kernel: bge1: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x004201> mem 0xdf4f0000-0xdf4fffff irq 17 at device 0.0 on pci6
Jan 28 11:04:05 lucid kernel: bge1: CHIP ID 0x00004201; ASIC REV 0x04; CHIP REV 0x42; PCI-E
Jan 28 11:04:05 lucid kernel: miibus5: <MII bus> on bge1
Jan 28 11:04:05 lucid kernel: brgphy1: <BCM5750 1000BASE-T media interface> PHY 1 on miibus5
Jan 28 11:04:05 lucid kernel: brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
Jan 28 11:04:05 lucid kernel: bge1: Ethernet address: 00:19:b9:fa:82:52
Jan 28 11:04:05 lucid kernel: uhci0: <Intel 82801I (ICH9) USB controller> port 0xdc60-0xdc7f irq 21 at device 29.0 on pci0
Jan 28 11:04:05 lucid kernel: usbus0 on uhci0
Jan 28 11:04:05 lucid kernel: uhci1: <Intel 82801I (ICH9) USB controller> port 0xdc80-0xdc9f irq 20 at device 29.1 on pci0
Jan 28 11:04:05 lucid kernel: usbus1 on uhci1
Jan 28 11:04:05 lucid kernel: uhci2: <Intel 82801I (ICH9) USB controller> port 0xdca0-0xdcbf irq 21 at device 29.2 on pci0
Jan 28 11:04:05 lucid kernel: usbus2 on uhci2
Jan 28 11:04:05 lucid kernel: ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xdf2ffc00-0xdf2fffff irq 21 at device 29.7 on pci0
Jan 28 11:04:05 lucid kernel: usbus3: EHCI version 1.0
Jan 28 11:04:05 lucid kernel: usbus3 on ehci0
Jan 28 11:04:05 lucid kernel: pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
Jan 28 11:04:05 lucid kernel: pci7: <ACPI PCI bus> on pcib7
Jan 28 11:04:05 lucid kernel: vgapci0: <VGA-compatible display> port 0xec00-0xecff mem 0xd0000000-0xd7ffffff,0xdf5f0000-0xdf5fffff irq 19 at device 5.0 on pci7
Jan 28 11:04:05 lucid kernel: isab0: <PCI-ISA bridge> at device 31.0 on pci0
Jan 28 11:04:05 lucid kernel: isa0: <ISA bus> on isab0
Jan 28 11:04:05 lucid kernel: atapci0: <Intel ICH9 SATA300 controller> port 0xdc30-0xdc37,0xdc28-0xdc2b,0xdc38-0xdc3f,0xdc2c-0xdc2f,0xdc40-0xdc4f,0xdc50-0xdc5f irq 23 at device 31.2 on pci0
Jan 28 11:04:05 lucid kernel: ata2: <ATA channel> at channel 0 on atapci0
Jan 28 11:04:05 lucid kernel: ata3: <ATA channel> at channel 1 on atapci0
Jan 28 11:04:05 lucid kernel: fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
Jan 28 11:04:05 lucid kernel: fdc0: does not respond
Jan 28 11:04:05 lucid kernel: device_attach: fdc0 attach returned 6
Jan 28 11:04:05 lucid kernel: uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
Jan 28 11:04:05 lucid kernel: atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
Jan 28 11:04:05 lucid kernel: atkbd0: <AT Keyboard> irq 1 on atkbdc0
Jan 28 11:04:05 lucid kernel: kbd0 at atkbd0
Jan 28 11:04:05 lucid kernel: atkbd0: [GIANT-LOCKED]
Jan 28 11:04:05 lucid kernel: psm0: <PS/2 Mouse> irq 12 on atkbdc0
Jan 28 11:04:05 lucid kernel: psm0: [GIANT-LOCKED]
Jan 28 11:04:05 lucid kernel: psm0: model IntelliMouse, device ID 3
Jan 28 11:04:05 lucid kernel: orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xc9000-0xc9fff,0xca000-0xcb7ff,0xec000-0xeffff on isa0
Jan 28 11:04:05 lucid kernel: sc0: <System console> at flags 0x100 on isa0
Jan 28 11:04:05 lucid kernel: sc0: VGA <16 virtual consoles, flags=0x300>
Jan 28 11:04:05 lucid kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Jan 28 11:04:05 lucid kernel: fdc0: No FDOUT register!
Jan 28 11:04:05 lucid kernel: ppc0: cannot reserve I/O port range
Jan 28 11:04:05 lucid kernel: ctl: CAM Target Layer loaded
Jan 28 11:04:05 lucid kernel: est0: <Enhanced SpeedStep Frequency Control> on cpu0
Jan 28 11:04:05 lucid kernel: p4tcc0: <CPU Frequency Thermal Control> on cpu0
Jan 28 11:04:05 lucid kernel: est1: <Enhanced SpeedStep Frequency Control> on cpu1
Jan 28 11:04:05 lucid kernel: p4tcc1: <CPU Frequency Thermal Control> on cpu1
Jan 28 11:04:05 lucid kernel: est2: <Enhanced SpeedStep Frequency Control> on cpu2
Jan 28 11:04:05 lucid kernel: p4tcc2: <CPU Frequency Thermal Control> on cpu2
Jan 28 11:04:05 lucid kernel: est3: <Enhanced SpeedStep Frequency Control> on cpu3
Jan 28 11:04:05 lucid kernel: p4tcc3: <CPU Frequency Thermal Control> on cpu3
Jan 28 11:04:05 lucid kernel: Timecounters tick every 1.000 msec
Jan 28 11:04:05 lucid kernel: usbus0: 12Mbps Full Speed USB v1.0
Jan 28 11:04:05 lucid kernel: usbus1: 12Mbps Full Speed USB v1.0
Jan 28 11:04:05 lucid kernel: usbus2: 12Mbps Full Speed USB v1.0
Jan 28 11:04:05 lucid kernel: usbus3: 480Mbps High Speed USB v2.0
Jan 28 11:04:05 lucid kernel: ugen0.1: <Intel> at usbus0
Jan 28 11:04:05 lucid kernel: uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
Jan 28 11:04:05 lucid kernel: ugen1.1: <Intel> at usbus1
Jan 28 11:04:05 lucid kernel: uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
Jan 28 11:04:05 lucid kernel: ugen2.1: <Intel> at usbus2
Jan 28 11:04:05 lucid kernel: uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
Jan 28 11:04:05 lucid kernel: ugen3.1: <Intel> at usbus3
Jan 28 11:04:05 lucid kernel: uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
Jan 28 11:04:05 lucid kernel: uhub0: 2 ports with 2 removable, self powered
Jan 28 11:04:05 lucid kernel: uhub1: 2 ports with 2 removable, self powered
Jan 28 11:04:05 lucid kernel: uhub2: 2 ports with 2 removable, self powered
Jan 28 11:04:05 lucid kernel: uhub3: 6 ports with 6 removable, self powered
Jan 28 11:04:05 lucid kernel: ada0 at ata2 bus 0 scbus0 target 0 lun 0
Jan 28 11:04:05 lucid kernel: ada0: <WDC WD800AAJS-18TDA1 01.00A04> ATA-7 SATA 2.x device
Jan 28 11:04:05 lucid kernel: ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
Jan 28 11:04:05 lucid kernel: ada0: 76293MB (156250000 512 byte sectors: 16H 63S/T 16383C)
Jan 28 11:04:05 lucid kernel: ada0: Previously was known as ad4
Jan 28 11:04:05 lucid kernel: SMP: AP CPU #3 Launched!
Jan 28 11:04:05 lucid kernel: SMP: AP CPU #1 Launched!
Jan 28 11:04:05 lucid kernel: cd0 at ata2 bus 0 scbus0 target 1 lun 0
Jan 28 11:04:05 lucid kernel: cd0: <TEAC DVD-ROM DV28EV D.AE> Removable CD-ROM SCSI-0 device
Jan 28 11:04:05 lucid kernel: cd0: 150.000MB/s transfers (SATA 1.x, UDMA2, ATAPI 12bytes, SMP: AP CPU #2 Launched!
Jan 28 11:04:05 lucid kernel: PIO 8192bytes)
Jan 28 11:04:05 lucid kernel: cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
Jan 28 11:04:05 lucid kernel: Timecounter "TSC-low" frequency 16667601 Hz quality 1000
Jan 28 11:04:05 lucid kernel: Root mount waiting for: usbus3
Jan 28 11:04:05 lucid kernel: ugen3.2: <vendor 0x04b4> at usbus3
Jan 28 11:04:05 lucid kernel: uhub4: <vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.0b, addr 2> on usbus3
Jan 28 11:04:05 lucid kernel: uhub4: MTT enabled
Jan 28 11:04:05 lucid kernel: uhub4: 4 ports with 4 removable, self powered
Jan 28 11:04:05 lucid kernel: Trying to mount root from ufs:/dev/ad4s1a [rw]...
Jan 28 11:04:06 lucid kernel: bge0: link state changed to UP
More information about the freebsd-net
mailing list