Bridging mesh with wired not working?

[Monthadar Al Jaberi]

Hi,

Can anyone confirm that bridging a mesh with a wired interface is not
working? I want to make sure that it is not a problem from my side.

When I ping from outside the mesh I get: "!valid or proxy" and "frame
not fwd'd, no path" from the debug information.

My setup is simple

STA --- MPP )) -- (( MP

STA: Ubuntu PC
MPP: RSPRO mesh portal bridging wired and mesh
MP: RSPRO mesh point

ifconfig for MPP:
arge0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST>
metric 0 mtu 1500
        options=80000<LINKSTATE>
        ether XX:XX:XX:XX:XX:XX
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
wlan0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST>
metric 0 mtu 1500
        ether YY:YY:YY:YY:YY:YY
        inet 192.168.1.91 netmask 0xffffff00 broadcast 192.168.1.255
        media: IEEE 802.11 Wireless Ethernet autoselect mode 11g <mesh>
        status: running
        meshid monty channel 1 (2412 MHz 11g) bssid 00:15:6d:67:21:8d
        country US ecm authmode OPEN privacy OFF txpower 20 scanvalid 60
        protmode CTS wme burst meshttl 31 meshpeering meshforward
        meshmetric AIRTIME meshpath HWMP hwmprootmode DISABLED hwmpmaxhops 31
bridge0: flags=28943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST,PPROMISC>
metric 0 mtu 1500
        ether ZZ:ZZ:ZZ:ZZ:ZZ:ZZ
        id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
        maxage 20 holdcnt 6 proto rstp maxaddr 100 timeout 1200
        root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
        member: arge0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
                ifmaxaddr 0 port 4 priority 128 path cost 200000
        member: wlan0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
                ifmaxaddr 0 port 7 priority 128 path cost 370370

br,
-- 
//Monthadar Al Jaberi