kern/92090: [bge] bge: watchdog timeout -- resetting

[Floris Bos]

On Thursday 14 January 2010 06:56:03 pm Pyun YongHyeon wrote:
> On Thu, Jan 14, 2010 at 04:33:19AM +0100, Floris Bos wrote:
> > Hi,
> > 
> > On Thursday 14 January 2010 03:54:52 am Pyun YongHyeon wrote:
> > > >  ==
> > > >  bge0: <HP NC107i PCIe Gigabit Server Adapter, ASIC rev. 0x5784100> mem 0xdf900000-0xdf90ffff irq 16 at device 0.0 on pci32
> > > >  ==
> > > >  
> > > >  After boot, the network works for about 5 seconds, barely enough time to get an IP by DHCP, and sent a ping or 2.
> > > >  Then network connectivity goes down, and after some time there is a "bge0: watchdog timeout -- resetting" message.
> > > >  
> > > >  Then network works again for 5 seconds, and goes down again. All the time, repeatedly.
> > > >  
> > > >  The system works fine under Ubuntu. So I assume the hardware is ok.
> > > >  
> > > 
> > > I'm not sure but it looks like you have a BCM5784 controller. What is
> > > the output of "devinfo -rv | grep phy"?
> > 
> > ==
> > ukphy0 pnpinfo oui=0x50ef model=0x3a rev=0x4 at phyno=1
> > ukphy1 pnpinfo oui=0x50ef model=0x3a rev=0x4 at phyno=1
> > ==
> 
> Support for the PHY was added in r202269.
> Please try again after applying the change. Or you can download
> sys/dev/mii/miidevs and sys/dev/mii/brgphy.c from HEAD and rebuild
> kernel.

Fetched the latest source using CVS on another computer, and transferred it to the system concerned by USB stick.
Rebuild the kernel, but the problem is still there.


Yours sincerely,

Floris Bos