Intel oplin interface
Jack Vogel
jfvogel at gmail.com
Fri Jan 8 19:52:28 UTC 2010
Another idea, look into at dmesg, see if there's any mention of the device
on boot, if these are pre-production devices they might not be supported.
Jack
On Fri, Jan 8, 2010 at 11:50 AM, Jack Vogel <jfvogel at gmail.com> wrote:
> Hmmm, it isn't even showing up in the pci scan, what if you remove one
> of the oplins, or move slots possibly, can't do much if its not even seen
> in the enumeration :( You're sure the adapters are good, like plugging
> them into another system they show up? Don't know why you should
> have to modify the kernel, GENERIC has ixgbe in it on 8.0.
>
> Jack Vogel
> freebsd at intel.com
>
>
>
> On Fri, Jan 8, 2010 at 11:02 AM, Netan <sunnyrama at gmail.com> wrote:
>
>> Hello
>>
>> I have a intel nehalem machine with 4 built-in igb ports on it. In
>> addition
>> to that I got 2 single port intel oplin 82598 pcie interfaces on them. I
>> edited the GENERIC conf file and added "device ixgbe" to build a kernel
>> containing ixgbe driver built-in into the kernel. When I boot hte system,
>> I
>> do not see any ixgbe interface on the system.
>>
>> lab-mach1# ifconfig -a
>> igb0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
>> options=13b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,TSO4>
>> ether 00:14:4f:e7:56:e2
>> inet 192.168.8.21 netmask 0xffffff00 broadcast 192.168.8.255
>> media: Ethernet autoselect (1000baseT <full-duplex>)
>> status: active
>> igb1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
>> options=13b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,TSO4>
>> ether 00:14:4f:e7:56:e3
>> media: Ethernet autoselect (1000baseT <full-duplex>)
>> status: active
>> igb2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
>> options=13b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,TSO4>
>> ether 00:14:4f:e7:56:e4
>> media: Ethernet autoselect (1000baseT <full-duplex>)
>> status: active
>> igb3: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
>> options=13b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,TSO4>
>> ether 00:14:4f:e7:56:e5
>> media: Ethernet autoselect (1000baseT <full-duplex>)
>> status: active
>> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
>> options=3<RXCSUM,TXCSUM>
>> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
>> inet6 ::1 prefixlen 128
>> inet 127.0.0.1 netmask 0xff000000
>>
>> lab-mach1#./kldstat -v | grep ixgbe
>> 156 pci/ixgbe
>>
>>
>> I am on "8.0-RELEASE FreeBSD". pciconf does not show any 82598 interface:
>>
>> lab-mach1#pciconf -lv
>> hostb0 at pci0:0:0:0: class=0x060000 card=0x4845108e chip=0x34068086
>> rev=0x13 hdr=0x00
>> vendor = 'Intel Corporation'
>> device = 'QuickPath Architecture I/O Hub to ESI Port'
>> class = bridge
>> subclass = HOST-PCI
>> pcib1 at pci0:0:1:0: class=0x060400 card=0x4845108e chip=0x34088086
>> rev=0x13
>> hdr=0x01
>> vendor = 'Intel Corporation'
>> device = 'QuickPath Architecture I/O Hub PCI Express Root Port 1'
>> class = bridge
>> subclass = PCI-PCI
>> pcib2 at pci0:0:2:0: class=0x060400 card=0x4845108e chip=0x34098086
>> rev=0x13
>> hdr=0x01
>> vendor = 'Intel Corporation'
>> device = 'QuickPath Architecture I/O Hub PCI Express Root Port 2'
>> class = bridge
>> subclass = PCI-PCI
>> pcib3 at pci0:0:3:0: class=0x060400 card=0x4845108e chip=0x340a8086
>> rev=0x13
>> hdr=0x01
>> vendor = 'Intel Corporation'
>> device = 'QuickPath Architecture I/O Hub PCI Express Root Port 3'
>> class = bridge
>> subclass = PCI-PCI
>> pcib4 at pci0:0:5:0: class=0x060400 card=0x4845108e chip=0x340c8086
>> rev=0x13
>> hdr=0x01
>> vendor = 'Intel Corporation'
>> device = 'QuickPath Architecture I/O Hub PCI Express Root Port 5'
>> class = bridge
>> subclass = PCI-PCI
>> pcib5 at pci0:0:7:0: class=0x060400 card=0x4845108e chip=0x340e8086
>> rev=0x13
>> hdr=0x01
>> vendor = 'Intel Corporation'
>> device = 'QuickPath Architecture I/O Hub PCI Express Root Port 7'
>> class = bridge
>> subclass = PCI-PCI
>> pcib7 at pci0:0:9:0: class=0x060400 card=0x4845108e chip=0x34108086
>> rev=0x13
>> hdr=0x01
>> vendor = 'Intel Corporation'
>> device = 'QuickPath Architecture I/O Hub PCI Express Root Port 9'
>> class = bridge
>> subclass = PCI-PCI
>> ioapic0 at pci0:0:19:0: class=0x080020 card=0x00000000 chip=0x342d8086
>> rev=0x13 hdr=0x00
>> vendor = 'Intel Corporation'
>> device = 'QuickPath Architecture I/O Hub I/OxAPIC Interrupt
>> Controller'
>> class = base peripheral
>> subclass = interrupt controller
>> none0 at pci0:0:20:0: class=0x080000 card=0x00000000 chip=0x342e8086
>> rev=0x13 hdr=0x00
>> vendor = 'Intel Corporation'
>> device = 'QuickPath Architecture I/O Hub System Management
>> Registers'
>> class = base peripheral
>> subclass = interrupt controller
>> none1 at pci0:0:20:1: class=0x080000 card=0x00000000 chip=0x34228086
>> rev=0x13 hdr=0x00
>> vendor = 'Intel Corporation'
>> device = 'QuickPath Architecture I/O Hub GPIO and Scratch Pad
>> Registers'
>> class = base peripheral
>> subclass = interrupt controller
>> none2 at pci0:0:20:2: class=0x080000 card=0x00000000 chip=0x34238086
>> rev=0x13 hdr=0x00
>> vendor = 'Intel Corporation'
>> device = 'QuickPath Architecture I/O Hub Control Status and RAS
>> Registers'
>> class = base peripheral
>> subclass = interrupt controller
>> none3 at pci0:0:20:3: class=0x080000 card=0x00000000 chip=0x34388086
>> rev=0x13 hdr=0x00
>> vendor = 'Intel Corporation'
>> device = 'QuickPath Architecture I/O Hub Throttle Registers'
>> class = base peripheral
>> subclass = interrupt controller
>> none4 at pci0:0:22:0: class=0x088000 card=0x4845108e chip=0x34308086
>> rev=0x13 hdr=0x00
>> vendor = 'Intel Corporation'
>> device = 'DMA Engine'
>> class = base peripheral
>> none5 at pci0:0:22:1: class=0x088000 card=0x4845108e chip=0x34318086
>> rev=0x13 hdr=0x00
>> vendor = 'Intel Corporation'
>> device = 'DMA Engine'
>> class = base peripheral
>> none6 at pci0:0:22:2: class=0x088000 card=0x4845108e chip=0x34328086
>> rev=0x13 hdr=0x00
>> vendor = 'Intel Corporation'
>> device = 'DMA Engine'
>> class = base peripheral
>> none7 at pci0:0:22:3: class=0x088000 card=0x4845108e chip=0x34338086
>> rev=0x13 hdr=0x00
>> vendor = 'Intel Corporation'
>> device = 'DMA Engine'
>> class = base peripheral
>> none8 at pci0:0:22:4: class=0x088000 card=0x4845108e chip=0x34298086
>> rev=0x13 hdr=0x00
>> vendor = 'Intel Corporation'
>> device = 'DMA Engine'
>> class = base peripheral
>> none9 at pci0:0:22:5: class=0x088000 card=0x4845108e chip=0x342a8086
>> rev=0x13 hdr=0x00
>> vendor = 'Intel Corporation'
>> device = 'DMA Engine'
>> class = base peripheral
>> none10 at pci0:0:22:6: class=0x088000 card=0x4845108e chip=0x342b8086
>> rev=0x13 hdr=0x00
>> vendor = 'Intel Corporation'
>> device = 'DMA Engine'
>> class = base peripheral
>> none11 at pci0:0:22:7: class=0x088000 card=0x4845108e chip=0x342c8086
>> rev=0x13 hdr=0x00
>> vendor = 'Intel Corporation'
>> device = 'DMA Engine'
>> class = base peripheral
>> uhci0 at pci0:0:26:0: class=0x0c0300 card=0x4845108e chip=0x3a378086
>> rev=0x00 hdr=0x00
>> vendor = 'Intel Corporation'
>> device = 'USB UHCI Controller *4'
>> class = serial bus
>> subclass = USB
>> uhci1 at pci0:0:26:1: class=0x0c0300 card=0x4845108e chip=0x3a388086
>> rev=0x00 hdr=0x00
>> vendor = 'Intel Corporation'
>> device = 'USB UHCI Controller *5'
>> class = serial bus
>> subclass = USB
>> uhci2 at pci0:0:26:2: class=0x0c0300 card=0x4845108e chip=0x3a398086
>> rev=0x00 hdr=0x00
>> vendor = 'Intel Corporation'
>> device = 'USB UHCI Controller *6'
>> class = serial bus
>> subclass = USB
>> ehci0 at pci0:0:26:7: class=0x0c0320 card=0x4845108e chip=0x3a3c8086
>> rev=0x00 hdr=0x00
>> vendor = 'Intel Corporation'
>> device = 'USB EHCI Controller *2'
>> class = serial bus
>> subclass = USB
>> uhci3 at pci0:0:29:0: class=0x0c0300 card=0x4845108e chip=0x3a348086
>> rev=0x00 hdr=0x00
>> vendor = 'Intel Corporation'
>> device = 'USB UHCI Controller *1'
>> class = serial bus
>> subclass = USB
>> uhci4 at pci0:0:29:1: class=0x0c0300 card=0x4845108e chip=0x3a358086
>> rev=0x00 hdr=0x00
>> vendor = 'Intel Corporation'
>> device = 'USB UHCI Controller *2'
>> class = serial bus
>> subclass = USB
>> uhci5 at pci0:0:29:2: class=0x0c0300 card=0x4845108e chip=0x3a368086
>> rev=0x00 hdr=0x00
>> vendor = 'Intel Corporation'
>> device = 'USB UHCI Controller *3'
>> class = serial bus
>> subclass = USB
>> ehci1 at pci0:0:29:7: class=0x0c0320 card=0x4845108e chip=0x3a3a8086
>> rev=0x00 hdr=0x00
>> vendor = 'Intel Corporation'
>> device = 'USB EHCI Controller *1'
>> class = serial bus
>> subclass = USB
>> pcib9 at pci0:0:30:0: class=0x060401 card=0x4845108e chip=0x244e8086
>> rev=0x90 hdr=0x01
>> vendor = 'Intel Corporation'
>> device = '82801 Family (ICH2/3/4/5/6/7/8/9,63xxESB) Hub Interface
>> to
>> PCI Bridge'
>> class = bridge
>> subclass = PCI-PCI
>> isab0 at pci0:0:31:0: class=0x060100 card=0x4845108e chip=0x3a168086
>> rev=0x00 hdr=0x00
>> vendor = 'Intel Corporation'
>> device = 'LPC Interface Controller'
>> class = bridge
>> subclass = PCI-ISA
>> atapci0 at pci0:0:31:2: class=0x010601 card=0x4845108e chip=0x3a228086
>> rev=0x00 hdr=0x00
>> vendor = 'Intel Corporation'
>> device = '6 port SATA AHCI Controller'
>> class = mass storage
>> subclass = SATA
>> none12 at pci0:0:31:3: class=0x0c0500 card=0x4845108e chip=0x3a308086
>> rev=0x00 hdr=0x00
>> vendor = 'Intel Corporation'
>> device = 'SMB controller (50011458)'
>> class = serial bus
>> subclass = SMBus
>> igb0 at pci0:1:0:0: class=0x020000 card=0x0000108e chip=0x10a78086
>> rev=0x02
>> hdr=0x00
>> vendor = 'Intel Corporation'
>> device = '82575EB Gigabit Network Connection'
>> class = network
>> subclass = ethernet
>> igb1 at pci0:1:0:1: class=0x020000 card=0x0000108e chip=0x10a78086
>> rev=0x02
>> hdr=0x00
>> vendor = 'Intel Corporation'
>> device = '82575EB Gigabit Network Connection'
>> class = network
>> subclass = ethernet
>> igb2 at pci0:7:0:0: class=0x020000 card=0x0000108e chip=0x10a78086
>> rev=0x02
>> hdr=0x00
>> vendor = 'Intel Corporation'
>> device = '82575EB Gigabit Network Connection'
>> class = network
>> subclass = ethernet
>> igb3 at pci0:7:0:1: class=0x020000 card=0x0000108e chip=0x10a78086
>> rev=0x02
>> hdr=0x00
>> vendor = 'Intel Corporation'
>> device = '82575EB Gigabit Network Connection'
>> class = network
>> subclass = ethernet
>> mpt0 at pci0:19:0:0: class=0x010000 card=0x31501000 chip=0x00581000
>> rev=0x04
>> hdr=0x00
>> vendor = 'LSI Logic (Was: Symbios Logic, NCR)'
>> device = 'SAS 3000 series, 8-port with 1068E -StorPort'
>> class = mass storage
>> subclass = SCSI
>> pcib6 at pci0:25:0:0: class=0x060400 card=0x00000000 chip=0x806e111d
>> rev=0x02 hdr=0x01
>> vendor = 'Integrated Device Technology Inc.'
>> class = bridge
>> subclass = PCI-PCI
>> pcib8 at pci0:39:0:0: class=0x060400 card=0x00000000 chip=0x806e111d
>> rev=0x02 hdr=0x01
>> vendor = 'Integrated Device Technology Inc.'
>> class = bridge
>> subclass = PCI-PCI
>> vgapci0 at pci0:53:5:0: class=0x030000 card=0x4845108e chip=0x20001a03
>> rev=0x10 hdr=0x00
>> vendor = 'ASPEED Technology Inc'
>> class = display
>> subclass = VGA
>>
>>
>> What else can I poke/change to get the oplin interface up ? Any help
>> appreciated..
>>
>> Thanks
>> Netan
>> _______________________________________________
>> freebsd-net at freebsd.org mailing list
>> http://lists.freebsd.org/mailman/listinfo/freebsd-net
>> To unsubscribe, send any mail to "freebsd-net-unsubscribe at freebsd.org"
>>
>
>
More information about the freebsd-net
mailing list