Broadcom BCM5701 / HP NC6770

[Evgenii Davidov]

Здравствуйте,

On Fri, Apr 09, 2010 at 01:39:16AM -0600, Erich Jenkins, Fuujin Group Ltd пишет:

> We were previously running 5.3 on this box (I know, VERY old), but never 
> had a problem. The link now fails to come up. I've tried forcing the 
> port out of auto (media 1000baseSX mediaopt full-duplex) and as long as 
> the port doesn't have an IP assigned via rc.conf on system boot, I can 
> get the switch to see it (Cisco 6505), but no traffic to flow. I've 
> checked all the obvious things (duplex setting on switch, cable failure, 
> etc.), all to no avail. I fiddled with the knobs in the driver (rxcsum, 
> vlan_mtu, etc) with no changes either.

sorry for silly ansver but is your interface UP ? (ifconfig bge0 up)

-- 
Evgenii V Davidov