trouble with Realtek NIC RTL8101E/RTL8102E under FreeBSD 7.2

[Alexander Kapshuk]

Dear FreeBSD-net Community,

I have trouble with FreeBSD 7.2 as well as PCBSD 7.1.1 detecting my
NIC properly.

Please see below for some technical details related to the problem.

output of less /var/run/dmesg.boot | grep re0

re0: <RealTek 8101E/8102E/8102EL PCIe 10/100baseTX> port 0x2000-0x20ff
mem 0xd4010000-0xd4010fff,0xd4000000-0xd400ffff irq 17 at device 0.0
on pci3
re0: Using 1 MSI messages
re0: Chip rev. 0x24800000
re0: MAC rev. 0x00400000
re0: Unknown H/W revision: 0x24c00000
device_attach: re0 attach returned 6
re0: <RealTek 8101E/8102E/8102EL PCIe 10/100baseTX> port 0x2000-0x20ff
mem 0xd4010000-0xd4010fff,0xd4000000-0xd400ffff irq 17 at device 0.0
on pci3
re0: Using 1 MSI messages
re0: Chip rev. 0x24800000
re0: MAC rev. 0x00400000
re0: Unknown H/W revision: 0x24c00000
device_attach: re0 attach returned 6
re0: <RealTek 8101E/8102E/8102EL PCIe 10/100baseTX> port 0x2000-0x20ff
mem 0xd4010000-0xd4010fff,0xd4000000-0xd400ffff irq 17 at device 0.0
on pci3
re0: Using 1 MSI messages
re0: Chip rev. 0x24800000
re0: MAC rev. 0x00400000
re0: Unknown H/W revision: 0x24c00000
device_attach: re0 attach returned 6
re0: <RealTek 8101E/8102E/8102EL PCIe 10/100baseTX> port 0x2000-0x20ff
mem 0xd4010000-0xd4010fff,0xd4000000-0xd400ffff irq 17 at device 0.0
on pci3
re0: Using 1 MSI messages
re0: Chip rev. 0x24800000
re0: MAC rev. 0x00400000
re0: Unknown H/W revision: 0x24c00000
device_attach: re0 attach returned 6

output of pciconf -l | grep re0

re0 at pci0:3:0:0:	class=0x020000 card=0x306a103c chip=0x813610ec rev=0x02 hdr=0x00

output of ifconfig

ath0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
	ether 00:24:2c:5e:06:f2
	media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
	status: no carrier
	ssid "" channel 1 (2412 Mhz 11b)
	authmode OPEN privacy OFF txpower 50 bmiss 7 scanvalid 60 bgscan
	bgscanintvl 300 bgscanidle 250 roam:rssi11b 7 roam:rate11b 1 burst
	bintval 0
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
	inet6 ::1 prefixlen 128
	inet 127.0.0.1 netmask 0xff000000
pflog0: flags=0<> metric 0 mtu 33204
pfsync0: flags=0<> metric 0 mtu 1460
	syncpeer: 224.0.0.240 maxupd: 128


Please let me know if you require further details that might be of help.

Look forward to hearing from anyone who would care to help at your convenience.

Regards,

Alexander Kapshuk.