Problems with Chelsio driver in CURRENT...
Kip Macy
kip.macy at gmail.com
Wed Feb 13 08:51:48 UTC 2008
When you say a "recent kernel/world", I take it you're still running 7.0?
-Kip
On Feb 12, 2008 11:38 PM, <gnn at freebsd.org> wrote:
> Hi,
>
> I have two MP/Multicore Xeon boxes with CX4 based Chelsio cards in
> them. If I boot 7.0-RC1 the cards can talk to each other. If I build
> a recent kernel/world (for instance from today) I cannot ping between
> them. I have tried using GENERIC as wella as a custom kernel.
>
> kodama8# ifconfig cxgb0
> cxgb0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 9000
> options=1bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4>
> ether 00:07:43:05:20:68
> inet 172.16.0.2 netmask 0xffffff00 broadcast 172.16.0.255
> media: Ethernet 10Gbase-CX4 <full-duplex> (autoselect <full-duplex>)
> status: active
> kodama8# ping 172.16.0.1
> PING 172.16.0.1 (172.16.0.1): 56 data bytes
> ^C
> --- 172.16.0.1 ping statistics ---
> 5 packets transmitted, 0 packets received, 100.0% packet loss
> kodama8#
>
> kodama$ uname -a
> FreeBSD kodama8.neville-neil.comA 7.0-RC1 FreeBSD 7.0-RC1 #0: Mon Dec 24 10:10:07 UTC 2007 root at driscoll.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64
> kodama8#
>
> nozomi8# ifconfig cxgb0
> cxgb0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 9000
> options=1bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4>
> ether 00:07:43:05:20:43
> inet 172.16.0.1 netmask 0xffffff00 broadcast 172.16.0.255
> media: Ethernet 10Gbase-CX4 <full-duplex> (autoselect <full-duplex>)
> status: active
> nozomi8#
>
> nozomi8# uname -a
> FreeBSD nozomi8.neville-neil.com 8.0-CURRENT FreeBSD 8.0-CURRENT #2: Wed Feb 13 15:47:05 JST 2008 root at nozomi8.neville-neil.com:/usr/obj/scratch/FreeBSD.HEAD/src/sys/GENERIC amd64
> nozomi8#
>
>
> The dmesg is at the end of this mail.
>
> Thoughts?
>
> Thanks,
> George
>
>
> nozomi8# dmesg
> Copyright (c) 1992-2008 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 8.0-CURRENT #2: Wed Feb 13 15:47:05 JST 2008
> root at nozomi8.neville-neil.com:/usr/obj/scratch/FreeBSD.HEAD/src/sys/GENERIC
> WARNING: WITNESS option enabled, expect reduced performance.
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel(R) Xeon(R) CPU X5355 @ 2.66GHz (2666.68-MHz K8-class CPU)
> Origin = "GenuineIntel" Id = 0x6f7 Stepping = 7
> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
> Features2=0x4e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA>
> AMD Features=0x20100800<SYSCALL,NX,LM>
> AMD Features2=0x1<LAHF>
> Cores per package: 4
> usable memory = 8575602688 (8178 MB)
> avail memory = 8306462720 (7921 MB)
> ACPI APIC Table: <PTLTD APIC >
> FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
> cpu0 (BSP): APIC ID: 0
> cpu1 (AP): APIC ID: 1
> cpu2 (AP): APIC ID: 2
> cpu3 (AP): APIC ID: 3
> cpu4 (AP): APIC ID: 4
> cpu5 (AP): APIC ID: 5
> cpu6 (AP): APIC ID: 6
> cpu7 (AP): APIC ID: 7
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> ioapic1 <Version 2.0> irqs 24-47 on motherboard
> kbd1 at kbdmux0
> ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
> acpi0: <PTLTD RSDT> on motherboard
> acpi0: [ITHREAD]
> acpi0: Power Button (fixed)
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
> acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
> Timecounter "HPET" frequency 14318180 Hz quality 900
> cpu0: <ACPI CPU> on acpi0
> est0: <Enhanced SpeedStep Frequency Control> on cpu0
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 82a082a0600082a
> device_attach: est0 attach returned 6
> p4tcc0: <CPU Frequency Thermal Control> on cpu0
> cpu1: <ACPI CPU> on acpi0
> est1: <Enhanced SpeedStep Frequency Control> on cpu1
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 82a082a0600082a
> device_attach: est1 attach returned 6
> p4tcc1: <CPU Frequency Thermal Control> on cpu1
> cpu2: <ACPI CPU> on acpi0
> est2: <Enhanced SpeedStep Frequency Control> on cpu2
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 82a082a0600082a
> device_attach: est2 attach returned 6
> p4tcc2: <CPU Frequency Thermal Control> on cpu2
> cpu3: <ACPI CPU> on acpi0
> est3: <Enhanced SpeedStep Frequency Control> on cpu3
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 82a082a0600082a
> device_attach: est3 attach returned 6
> p4tcc3: <CPU Frequency Thermal Control> on cpu3
> cpu4: <ACPI CPU> on acpi0
> est4: <Enhanced SpeedStep Frequency Control> on cpu4
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 82a082a0600082a
> device_attach: est4 attach returned 6
> p4tcc4: <CPU Frequency Thermal Control> on cpu4
> cpu5: <ACPI CPU> on acpi0
> est5: <Enhanced SpeedStep Frequency Control> on cpu5
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 82a082a0600082a
> device_attach: est5 attach returned 6
> p4tcc5: <CPU Frequency Thermal Control> on cpu5
> cpu6: <ACPI CPU> on acpi0
> est6: <Enhanced SpeedStep Frequency Control> on cpu6
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 82a082a0600082a
> device_attach: est6 attach returned 6
> p4tcc6: <CPU Frequency Thermal Control> on cpu6
> cpu7: <ACPI CPU> on acpi0
> est7: <Enhanced SpeedStep Frequency Control> on cpu7
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 82a082a0600082a
> device_attach: est7 attach returned 6
> p4tcc7: <CPU Frequency Thermal Control> on cpu7
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> pcib2: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci1
> pci2: <ACPI PCI bus> on pcib2
> pcib3: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci2
> pci3: <ACPI PCI bus> on pcib3
> pcib4: <ACPI PCI-PCI bridge> at device 0.0 on pci3
> pci4: <ACPI PCI bus> on pcib4
> ahd0: <Adaptec AIC7902 Ultra320 SCSI adapter> port 0x2400-0x24ff,0x2000-0x20ff mem 0xd8b00000-0xd8b01fff irq 16 at device 2.0 on pci4
> ahd0: [ITHREAD]
> aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs
> ahd1: <Adaptec AIC7902 Ultra320 SCSI adapter> port 0x2c00-0x2cff,0x2800-0x28ff mem 0xd8b02000-0xd8b03fff irq 17 at device 2.1 on pci4
> ahd1: [ITHREAD]
> aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs
> pcib5: <ACPI PCI-PCI bridge> at device 0.2 on pci3
> pci5: <ACPI PCI bus> on pcib5
> pcib6: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci2
> pci6: <ACPI PCI bus> on pcib6
> em0: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port 0x3000-0x301f mem 0xd8a20000-0xd8a3ffff,0xd8a00000-0xd8a1ffff irq 18 at device 0.0 on pci6
> em0: Using MSI interrupt
> em0: Ethernet address: 00:30:48:64:1e:20
> em0: [FILTER]
> em1: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port 0x3020-0x303f mem 0xd8a60000-0xd8a7ffff,0xd8a40000-0xd8a5ffff irq 19 at device 0.1 on pci6
> em1: Using MSI interrupt
> em1: Ethernet address: 00:30:48:64:1e:21
> em1: [FILTER]
> pcib7: <ACPI PCI-PCI bridge> at device 0.3 on pci1
> pci7: <ACPI PCI bus> on pcib7
> pcib8: <ACPI PCI-PCI bridge> at device 4.0 on pci0
> pci8: <ACPI PCI bus> on pcib8
> pcib9: <ACPI PCI-PCI bridge> at device 6.0 on pci0
> pci9: <ACPI PCI bus> on pcib9
> pci9: <network, ethernet> at device 0.0 (no driver attached)
> pci0: <base peripheral> at device 8.0 (no driver attached)
> pcib10: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
> pci10: <ACPI PCI bus> on pcib10
> uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port 0x1800-0x181f irq 17 at device 29.0 on pci0
> uhci0: [GIANT-LOCKED]
> uhci0: [ITHREAD]
> usb0: <Intel 631XESB/632XESB/3100 USB controller USB-1> on uhci0
> usb0: USB revision 1.0
> uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
> uhub0: 2 ports with 2 removable, self powered
> uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port 0x1820-0x183f irq 19 at device 29.1 on pci0
> uhci1: [GIANT-LOCKED]
> uhci1: [ITHREAD]
> usb1: <Intel 631XESB/632XESB/3100 USB controller USB-2> on uhci1
> usb1: USB revision 1.0
> uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
> uhub1: 2 ports with 2 removable, self powered
> uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port 0x1840-0x185f irq 18 at device 29.2 on pci0
> uhci2: [GIANT-LOCKED]
> uhci2: [ITHREAD]
> usb2: <Intel 631XESB/632XESB/3100 USB controller USB-3> on uhci2
> usb2: USB revision 1.0
> uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
> uhub2: 2 ports with 2 removable, self powered
> ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xd8f00000-0xd8f003ff irq 17 at device 29.7 on pci0
> ehci0: [GIANT-LOCKED]
> ehci0: [ITHREAD]
> usb3: EHCI version 1.0
> usb3: companion controllers, 2 ports each: usb0 usb1 usb2
> usb3: <Intel 63XXESB USB 2.0 controller> on ehci0
> usb3: USB revision 2.0
> uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
> uhub3: 6 ports with 6 removable, self powered
> pcib11: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci11: <ACPI PCI bus> on pcib11
> vgapci0: <VGA-compatible display> port 0x4000-0x40ff mem 0xd0000000-0xd7ffffff,0xd8c00000-0xd8c0ffff irq 18 at device 1.0 on pci11
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel 63XXESB2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1860-0x186f at device 31.1 on pci0
> ata0: <ATA channel 0> on atapci0
> ata0: [ITHREAD]
> ata1: <ATA channel 1> on atapci0
> ata1: [ITHREAD]
> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> acpi_button0: <Power Button> on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> atkbd0: [ITHREAD]
> sio0: configured irq 4 not in bitmap of probed irqs 0
> sio0: port may not be enabled
> sio0: configured irq 4 not in bitmap of probed irqs 0
> sio0: port may not be enabled
> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
> sio0: type 16550A, console
> sio0: [FILTER]
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
> sio1: type 16550A
> sio1: [FILTER]
> fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
> fdc0: [FILTER]
> ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0
> ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
> ppc0: FIFO with 16/16/9 bytes threshold
> ppbus0: <Parallel port bus> on ppc0
> ppbus0: [ITHREAD]
> plip0: <PLIP network interface> on ppbus0
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> ppc0: [GIANT-LOCKED]
> ppc0: [ITHREAD]
> orm0: <ISA Option ROM> at iomem 0xc0000-0xcafff on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x100>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> Timecounters tick every 1.000 msec
> Waiting 5 seconds for SCSI devices to settle
> acd0: DVDROM <ATAPI DVD D DH16D2P/HP53> at ata0-slave UDMA33
> da0 at ahd0 bus 0 target 0 lun 0
> da0: <SEAGATE ST3146855LW 0003> Fixed Direct Access SCSI-3 device
> da0: 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
> da0: Command Queueing Enabled
> da0: 140014MB (286749488 512 byte sectors: 255H 63S/T 17849C)
> SMP: AP CPU #1 Launched!
> SMP: AP CPU #2 Launched!
> SMP: AP CPU #3 Launched!
> SMP: AP CPU #5 Launched!
> SMP: AP CPU #6 Launched!
> SMP: AP CPU #7 Launched!
> SMP: AP CPU #4 Launched!
> WARNING: WITNESS option enabled, expect reduced performance.
> lock order reversal:
> 1st 0xffffff0003426e28 devfs (devfs) @ /scratch/FreeBSD.HEAD/src/sys/kern/vfs_subr.c:2061
> 2nd 0xffffff000348fda0 devfsmount (devfsmount) @ /scratch/FreeBSD.HEAD/src/sys/fs/devfs/devfs_vnops.c:201
> KDB: stack backtrace:
> db_trace_self_wrapper() at db_trace_self_wrapper+0x2a
> witness_checkorder() at witness_checkorder+0x605
> _sx_xlock() at _sx_xlock+0x52
> devfs_allocv() at devfs_allocv+0x136
> devfs_root() at devfs_root+0x52
> set_rootvnode() at set_rootvnode+0x2c
> vfs_mountroot() at vfs_mountroot+0x310
> start_init() at start_init+0x62
> fork_exit() at fork_exit+0x12a
> fork_trampoline() at fork_trampoline+0xe
> --- trap 0, rip = 0, rsp = 0xffffffffac266d30, rbp = 0 ---
> Trying to mount root from ufs:/dev/da0s1a
> lock order reversal:
> 1st 0xffffff0003426668 ufs (ufs) @ /scratch/FreeBSD.HEAD/src/sys/kern/vfs_subr.c:2061
> 2nd 0xffffff00034ed000 vfslock (vfslock) @ /scratch/FreeBSD.HEAD/src/sys/kern/vfs_subr.c:364
> KDB: stack backtrace:
> db_trace_self_wrapper() at db_trace_self_wrapper+0x2a
> witness_checkorder() at witness_checkorder+0x605
> _lockmgr() at _lockmgr+0x4e3
> vfs_busy() at vfs_busy+0xdf
> lookup() at lookup+0x8a6
> namei() at namei+0x2cb
> kern_unlink() at kern_unlink+0x8e
> vfs_mountroot_try() at vfs_mountroot_try+0x41f
> vfs_mountroot() at vfs_mountroot+0x3fd
> start_init() at start_init+0x62
> fork_exit() at fork_exit+0x12a
> fork_trampoline() at fork_trampoline+0xe
> --- trap 0, rip = 0, rsp = 0xffffffffac266d30, rbp = 0 ---
> lock order reversal:
> 1st 0xffffff00010ec070 user map (user map) @ /scratch/FreeBSD.HEAD/src/sys/vm/vm_map.c:3111
> 2nd 0xffffff0003426288 ufs (ufs) @ /scratch/FreeBSD.HEAD/src/sys/kern/vfs_subr.c:2061
> KDB: stack backtrace:
> db_trace_self_wrapper() at db_trace_self_wrapper+0x2a
> witness_checkorder() at witness_checkorder+0x605
> _lockmgr() at _lockmgr+0x4e3
> ffs_lock() at ffs_lock+0x6d
> VOP_LOCK1_APV() at VOP_LOCK1_APV+0x9b
> _vn_lock() at _vn_lock+0x8b
> vget() at vget+0x125
> vnode_pager_lock() at vnode_pager_lock+0x14a
> vm_fault() at vm_fault+0x1e5
> trap_pfault() at trap_pfault+0x128
> trap() at trap+0x4f2
> calltrap() at calltrap+0x8
> --- trap 0xc, rip = 0x400146, rsp = 0x7fffffffee80, rbp = 0x7fffffffeeb8 ---
> em1: link state changed to UP
> cxgbc0: <Chelsio T310 RNIC, 1 port> mem 0xd8801000-0xd8801fff,0xd8000000-0xd87fffff,0xd8800000-0xd8800fff irq 18 at device 0.0 on pci9
> cxgb0: <Port 0 10GBASE-CX4> on cxgbc0
> cxgb0: Ethernet address: 00:07:43:05:20:43
> Failed to allocate cluster
> Failed to allocate cluster
> Failed to allocate cluster
> Failed to allocate cluster
> cxgbc0: [ITHREAD]
> setting up interrupt for port=0
> cxgbc0: [ITHREAD]
> setting up interrupt for port=0
> cxgbc0: [ITHREAD]
> setting up interrupt for port=0
> cxgbc0: [ITHREAD]
> setting up interrupt for port=0
> cxgbc0: [ITHREAD]
> setting up interrupt for port=0
> cxgbc0: [ITHREAD]
> setting
> up interrupt for port=0
> cxgbc0: [ITHREAD]
> setting up interrupt for port=0
> cxgbc0: [ITHREAD]
> setting up interrupt for port=0
> cxgbc0: [ITHREAD]
> bind qsets
> cxgbc0: starting thread for 0
> device_map=0x1
> adding adapter 0xffffffff8134f000
> cxgbc0: offload started
> offload opened
> cxgb0: link state changed to UP
> cxgbc0: enabling interrupts on port=0
> nozomi8#
> _______________________________________________
> freebsd-net at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-net
> To unsubscribe, send any mail to "freebsd-net-unsubscribe at freebsd.org"
>
More information about the freebsd-net
mailing list