Bug?: (bge) BCM5787 makes 7.0/8-CURRENT completely unusable
(Was: Issue: bge still freezes RELENG_7 system on HP Compaq 6710b)
Andrey Kosachenko
andrey.kosachenko at gmail.com
Fri Nov 9 12:48:16 PST 2007
I suppose output of "uname -a", "pciconf -lv" and "dmesg" would be useful.
> Good time of the day.
>
> I'm not pleased to emphasize that BGE makes FreeBSD 7.0/8.0 systems
> completely unusable on machines with BCM5787 (NetLink BCM5787M Gigabit
> Ethernet)
>
> Install CD hangs as soon as it tries to load driver for Ethernet device
> (tested on 7-CURRENT (snapshots 200708, 200709, 200710) 7-BETA1.5,
> 7-BETA2 and 8-CURRENT.
>
> After looking through the lists I realized that earlier similar problem
> connected with BCM5787 detection was exposed and a corresponding PR was
> opened. I mean (kern/105005)
> http://www.freebsd.org/cgi/query-pr.cgi?pr=105005
> Those PR (kern/105005) was closed later. Nevertheless the root of the
> problem is remained I suppose. Just an excerpt of reports:
>
> 7-current freeze on HP6710b with BroadCom (bge0) -
> (http://lists.freebsd.org/pipermail/freebsd-current/2007-October/077781.html)
> bge driver causes freeze -
> (http://lists.freebsd.org/pipermail/freebsd-current/2007-September/077347.html)
> kern/116328: [bge]: Solid hang with bge interface
> (http://www.freebsd.org/cgi/query-pr.cgi?pr=kern/116328)
> Compaq HP 6710b freezes on 7-CURRENT-SNAP-200708 -
> (http://lists.freebsd.org/pipermail/freebsd-current/2007-September/076856.html)
> panic in 8-CURRENT / BGE hang -
> (http://lists.freebsd.org/pipermail/freebsd-current/2007-November/079518.html)
>
> Sad but true.
> It is also noticeable that BGE handles BCM5787 in RELENG_6 properly and
> there is no complains.
>
> So I would like to know if there anyone who experiences the same
> problems with BCM5787 and bge on non-HP machines? And should described
> problem be considered as a bug with corresponding PR opening?
--
Sincerely,
Andrey
-------------- next part --------------
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-BETA2 #0: Thu Nov 8 23:58:43 EET 2007
root@:/usr/obj/usr/src/sys/FREE-SMP-ULE-08112007-v1
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz (1995.01-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6fa Stepping = 10
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
real memory = 1065025536 (1015 MB)
avail memory = 1032839168 (984 MB)
ACPI APIC Table: <HP 30C0 >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <HPQOEM SLIC-MPC> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 3f700000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x16> port 0x62,0x66 on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x4000-0x4007 mem 0xe4300000-0xe43fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
agp0: <Intel GM965 SVGA controller> on vgapci0
agp0: detected 7676k stolen memory
agp0: aperture size is 256M
vgapci1: <VGA-compatible display> mem 0xe4400000-0xe44fffff at device 2.1 on pci0
uhci0: <UHCI (generic) USB controller> port 0x4020-0x403f irq 16 at device 26.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x4040-0x405f irq 17 at device 26.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xe4500000-0xe45003ff irq 18 at device 26.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
uhub2: 4 ports with 4 removable, self powered
pci0: <multimedia> at device 27.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci8: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci16: <ACPI PCI bus> on pcib2
pci16: <network> at device 0.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci24: <ACPI PCI bus> on pcib3
pci24: <network, ethernet> at device 0.0 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci40: <ACPI PCI bus> on pcib4
uhci2: <UHCI (generic) USB controller> port 0x4060-0x407f irq 20 at device 29.0 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb3: <UHCI (generic) USB controller> on uhci2
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0x4080-0x409f irq 21 at device 29.1 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb4: <UHCI (generic) USB controller> on uhci3
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: <UHCI (generic) USB controller> port 0x40a0-0x40bf irq 18 at device 29.2 on pci0
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: <UHCI (generic) USB controller> on uhci4
usb5: USB revision 1.0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xe4508000-0xe45083ff irq 20 at device 29.7 on pci0
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb6: EHCI version 1.0
usb6: companion controllers, 2 ports each: usb3 usb4 usb5
usb6: <EHCI (generic) USB 2.0 controller> on ehci1
usb6: USB revision 2.0
uhub6: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb6
uhub6: 6 ports with 6 removable, self powered
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib5
cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xe4200000-0xe4200fff irq 16 at device 4.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [ITHREAD]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <GENERIC ATA controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x40c0-0x40cf irq 16 at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
atapci1: <Intel ICH8M SATA300 controller> port 0x13f0-0x13f7,0x15f4-0x15f7,0x1370-0x1377,0x1574-0x1577,0x4100-0x411f mem 0xe4509000-0xe45097ff irq 17 at device 31.2 on pci0
atapci1: [ITHREAD]
atapci1: AHCI Version 01.10 controller with 3 ports detected
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: port not implemented
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci1
ata4: port not implemented
ata4: [ITHREAD]
battery0: <ACPI Control Method Battery> on acpi0
battery1: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz0: _CRT value is absurd, ignored (256.0C)
acpi_tz1: <Thermal Zone> on acpi0
acpi_tz2: <Thermal Zone> on acpi0
acpi_tz3: <Thermal Zone> on acpi0
acpi_tz4: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
ugen0: <vendor 0x08ff Fingerprint Sensor, class 255/255, rev 1.10/6.23, addr 2> on uhub3
Timecounters tick every 1.000 msec
acd0: DVDR <HL-DT-ST DVDRAM GSA-T20N/WC05> at ata0-master PIO4
ad4: 152627MB <Hitachi HTS541616J9SA00 SB4OC7BP> at ata2-master SATA150
acpi_tz0: _CRT value is absurd, ignored (256.0C)
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad4s3a
-------------- next part --------------
hostb0 at pci0:0:0:0: class=0x060000 card=0x30c0103c chip=0x2a008086 rev=0x0c hdr=0x00
vendor = 'Intel Corporation'
device = 'Mobile PM965/GM965/GL960 Express Processor to DRAM Controller'
class = bridge
subclass = HOST-PCI
vgapci0 at pci0:0:2:0: class=0x030000 card=0x30c0103c chip=0x2a028086 rev=0x0c hdr=0x00
vendor = 'Intel Corporation'
device = 'Mobile 965 Express Integrated Graphics Controller'
class = display
subclass = VGA
vgapci1 at pci0:0:2:1: class=0x038000 card=0x30c0103c chip=0x2a038086 rev=0x0c hdr=0x00
vendor = 'Intel Corporation'
device = 'Mobile 965 Express Integrated Graphics Controller'
class = display
uhci0 at pci0:0:26:0: class=0x0c0300 card=0x30c0103c chip=0x28348086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) USB UHCI'
class = serial bus
subclass = USB
uhci1 at pci0:0:26:1: class=0x0c0300 card=0x30c0103c chip=0x28358086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) USB UHCI'
class = serial bus
subclass = USB
ehci0 at pci0:0:26:7: class=0x0c0320 card=0x30c0103c chip=0x283a8086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '81EC1043 (?) ICH8 Enhanced USB2 Enhanced Host Controller'
class = serial bus
subclass = USB
none0 at pci0:0:27:0: class=0x040300 card=0x30c0103c chip=0x284b8086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H &SUBSYS_81EC1043&REV_02\3&11583659&0&D8'
class = multimedia
pcib1 at pci0:0:28:0: class=0x060400 card=0x30c0103c chip=0x283f8086 rev=0x03 hdr=0x01
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) PCIe Port 1'
class = bridge
subclass = PCI-PCI
pcib2 at pci0:0:28:1: class=0x060400 card=0x30c0103c chip=0x28418086 rev=0x03 hdr=0x01
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) PCIe Port 2'
class = bridge
subclass = PCI-PCI
pcib3 at pci0:0:28:2: class=0x060400 card=0x30c0103c chip=0x28438086 rev=0x03 hdr=0x01
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) PCIe Port 3'
class = bridge
subclass = PCI-PCI
pcib4 at pci0:0:28:4: class=0x060400 card=0x30c0103c chip=0x28478086 rev=0x03 hdr=0x01
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) PCIe Port 5'
class = bridge
subclass = PCI-PCI
uhci2 at pci0:0:29:0: class=0x0c0300 card=0x30c0103c chip=0x28308086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) USB UHCI'
class = serial bus
subclass = USB
uhci3 at pci0:0:29:1: class=0x0c0300 card=0x30c0103c chip=0x28318086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) USB UHCI'
class = serial bus
subclass = USB
uhci4 at pci0:0:29:2: class=0x0c0300 card=0x30c0103c chip=0x28328086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) USB UHCI'
class = serial bus
subclass = USB
ehci1 at pci0:0:29:7: class=0x0c0320 card=0x30c0103c chip=0x28368086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) USB2 EHCI'
class = serial bus
subclass = USB
pcib5 at pci0:0:30:0: class=0x060401 card=0x30c0103c chip=0x24488086 rev=0xf3 hdr=0x01
vendor = 'Intel Corporation'
device = '82801BAM/CAM/DBM (ICH2-M/3-M/4-M) Hub Interface to PCI Bridge'
class = bridge
subclass = PCI-PCI
isab0 at pci0:0:31:0: class=0x060100 card=0x30c0103c chip=0x28158086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = 'ICH8M-E (ICH8 Family) LPC Interface Controller'
class = bridge
subclass = PCI-ISA
atapci0 at pci0:0:31:1: class=0x01018a card=0x30c0103c chip=0x28508086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) Ultra ATA Storage Controllers'
class = mass storage
subclass = ATA
atapci1 at pci0:0:31:2: class=0x010601 card=0x30c0103c chip=0x28298086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82801 Intel(R) 82801HEM/HBM SATA AHCI Controller'
class = mass storage
none1 at pci0:16:0:0: class=0x028000 card=0x135c103c chip=0x42228086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '10418086 Intel 3945ABG Wireless LAN controller'
class = network
none2 at pci0:24:0:0: class=0x020000 card=0x30c0103c chip=0x169314e4 rev=0x02 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'BCM 5787A Ethernet Controller Broadcom Netlink Gigabit'
class = network
subclass = ethernet
cbb0 at pci0:2:4:0: class=0x060700 card=0x30c0103c chip=0x04761180 rev=0xb6 hdr=0x02
vendor = 'Ricoh Company, Ltd.'
device = 'unknown Ricoh R/RL/5C476(II)'
class = bridge
subclass = PCI-CardBus
-------------- next part --------------
FreeBSD 7.0-BETA2 FreeBSD 7.0-BETA2 #0: Thu Nov 8 23:58:43 EET 2007 root@:/usr/obj/usr/src/sys/FREE-SMP-ULE-08112007-v1 i386
More information about the freebsd-net
mailing list