6.2-RELENG/7.0-CURRENT: em(4) fails on 82571EB
Jack Vogel
jfvogel at gmail.com
Mon Jul 9 17:36:25 UTC 2007
The 82571 device has been supported for a long time, the trick
comes when you have a gang of them how the thing is all wired
up, we have had issues even with our quad port adapters and
some vendor BIOS's. This is a custom so I'm only going to be
able to guess that its interrupts.
You say no traffic works, on NONE of the ports?? Do you have
anyway to disable part of them? Do the 541's work?
I need more debugging, assign address to em0, instrument it
however you need to, does anything get transmitted, what
interrupt handling is done, etc etc...
Jack
On 7/9/07, paketix at bluewin.ch <paketix at bluewin.ch> wrote:
> hello everybody
> i encountered some problems with the intel 82571EB chipset when i
> tried to upgrade from FreeBSD 6.1-RELENG to 6.2-RELENG/7.0-CURRENT on
> a network appliance (NEXCOM 1108GL)
> the appliance has 3 different intel ethernet controllers soldered
> to the motherboard
> E1000_DEV_ID_82541GI 0x1076
> E1000_DEV_ID_82571EB_COPPER 0x105E
> E1000_DEV_ID_82571EB_SERDES 0x1060
> current intel driver version:
> 6.5.3 (from 7.0-CURRENT)
>
> problem description:
> chipset initialisation seems to work OK
> ifconfig displays the devices / link state seems to be OK
> 'ifconfig up' and 'tcpdump' are NOK (>no packets recieved on
> interface - leds indicate packet reception)
> interrupts seem to be OK (link up/down triggers em_intr on 6.2-
> RELENG - behaviour on 7.0-CURRENT unknown yet)
>
> affected releases:
> it seems to be the same problem on 6.2-RELENG/7.0-CURRENT
> 6.1-RELENG works fine...
>
> anyone interested in tracking this down...?
> any experience with this behaviour @intel?
> i have a server in the lab which is ready to act as a guinea pig
> for tests/paches...
> -------
> rgds, pat
>
> freebsd# uname -a
> FreeBSD freebsd.sharedtcs.net 7.0-CURRENT-200706
> FreeBSD 7.0-CURRENT-200706 #0: Sun Jun 3 18:41:02 UTC 2007
> root at almeida.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386
>
> freebsd# pciconf -l | grep em
> em0 at pci6:0:0: class=0x020000 card=0x10761903 chip=0x105e8086
> rev=0x06 hdr=0x00 (82571EB Gigabit Ethernet Controller w. int. PHY)
> em1 at pci6:0:1: class=0x020000 card=0x10761903 chip=0x105e8086
> rev=0x06 hdr=0x00 (82571EB Gigabit Ethernet Controller w. int. PHY)
> em2 at pci7:0:0: class=0x020000 card=0x10761903 chip=0x105e8086
> rev=0x06 hdr=0x00 (82571EB Gigabit Ethernet Controller w. int. PHY)
> em3 at pci7:0:1: class=0x020000 card=0x10761903 chip=0x105e8086
> rev=0x06 hdr=0x00 (82571EB Gigabit Ethernet Controller w. int. PHY)
> em4 at pci8:0:0: class=0x020000 card=0x10761903 chip=0x10608086
> rev=0x06 hdr=0x00 (82571EB Gigabit Ethernet Controller w. ext. SERDES
> for SFP modules)
> em5 at pci8:0:1: class=0x020000 card=0x10761903 chip=0x10608086
> rev=0x06 hdr=0x00 (82571EB Gigabit Ethernet Controller w. ext. SERDES
> for SFP modules)
> em6 at pci9:0:0: class=0x020000 card=0x10761903 chip=0x105e8086
> rev=0x06 hdr=0x00 (82571EB Gigabit Ethernet Controller w. int. PHY)
> em7 at pci9:0:1: class=0x020000 card=0x10761903 chip=0x105e8086
> rev=0x06 hdr=0x00 (82571EB Gigabit Ethernet Controller w. int. PHY)
> em8 at pci13:7:0: class=0x020000 card=0x10761903 chip=0x10768086
> rev=0x05 hdr=0x00 (82541EI Gigabit Ethernet Controller w. int. PHY)
> em9 at pci13:9:0: class=0x020000 card=0x10761903 chip=0x10768086
> rev=0x05 hdr=0x00 (82541EI Gigabit Ethernet Controller w. int. PHY)
>
> freebsd# cat /var/run/dmesg.boot
> Copyright (c) 1992-2007 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
> 1994
> The Regents of the University of California. All rights
> reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 7.0-CURRENT-200706 #0: Sun Jun 3 18:41:02 UTC 2007
> root at almeida.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
> WARNING: WITNESS option enabled, expect reduced performance.
> Using 32 colors for the VM-PQ tuning (1024, 8)
> Preloaded elf kernel "/boot/kernel.orig/kernel" at 0xc0c95000.
> MP Configuration Table version 1.4 found at 0xc00f1400
> APIC: Using the MPTable enumerator.
> SMP: Added CPU 0 (BSP)
> SMP: Added CPU 1 (AP)
> MPTable: <OEM00000 PROD00000000>
> Calibrating clock(s) ... i8254 clock: 1193199 Hz
> CLK_USE_I8254_CALIBRATION not specified - using default frequency
> Timecounter "i8254" frequency 1193182 Hz quality 0
> Calibrating TSC clock ... TSC clock: 3200127568 Hz
> CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz (3200.13-MHz 686-class CPU)
> Origin = "GenuineIntel" Id = 0xf49 Stepping = 9
> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,
> MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,
> TM,PBE>
> Features2=0x641d<SSE3,RSVD2,MON,DS_CPL,CNXT-ID,CX16,xTPR>
> AMD Features=0x20100000<NX,LM>
> AMD Features2=0x1<LAHF>
> Logical CPUs per core: 2
>
> Instruction TLB: 4 KB, 2 MB or 4 MB pages, fully associative, 64
> entries
> Data TLB: 4 KB or 4 MB pages, fully associative, 64 entries
> 1st-level data cache: 16 KB, 8-way set associative, sectored cache,
> 64 byte line size
> Trace cache: 12K-uops, 8-way set associative
> 2nd-level cache: 1 MB, 8-way set associative, sectored cache, 64
> byte line size
> L2 cache: 1024 kbytes, 8-way associative, 64 bytes/line
> real memory = 1065287680 (1015 MB)
> Physical memory chunk(s):
> 0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages)
> 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
> 0x0000000001028000 - 0x000000003e5cbfff, 1029324800 bytes (251300
> pages)
> avail memory = 1028886528 (981 MB)
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> cpu0 (BSP): APIC ID: 0
> cpu1 (AP): APIC ID: 1
> bios32: Found BIOS32 Service Directory header at 0xc00f9350
> bios32: Entry = 0xf9960 (c00f9960) Rev = 0 Len = 1
> pcibios: PCI BIOS entry at 0xf0000+0x9990
> pnpbios: Found PnP BIOS data at 0xc00fa550
> pnpbios: Entry = f0000:a580 Rev = 1.0
> Other BIOS signatures found:
> ioapic0: Changing APIC ID to 4
> ioapic0: Assuming intbase of 0
> ioapic0: Routing external 8259A's -> intpin 0
> ioapic0: Routing IRQ 0 -> intpin 2
> ioapic0: intpin 9 trigger: level
> lapic: Routing ExtINT -> LINT0
> lapic: Routing NMI -> LINT1
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> cpu0 BSP:
> ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR:
> 0xffffffff
> lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR:
> 0x000001ff
> timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm:
> 0x00010000
> wlan_amrr: <AMRR Transmit Rate Control Algorithm>
> wlan: <802.11 Link Layer>
> ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
> null: <null device, zero device>
> random: <entropy source, Software, Yarrow>
> nfslock: pseudo-device
> io: <I/O>
> kbd: new array size 4
> kbd1 at kbdmux0
> mem: <memory>
> Pentium Pro MTRR support enabled
> ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413,
> RF5413)
> rr232x: RocketRAID 232x controller driver v1.02 (Jun 3 2007 18:40:
> 23)
> npx0: INT 16 interface
> cpu0 on motherboard
> cpu1 on motherboard
> pci_open(1): mode 1 addr port (0x0cf8) is 0x80000090
> pci_open(1a): mode1res=0x80000000 (0x80000000)
> pci_cfgcheck: device 0 [class=060000] [hdr=00] is there
> (id=27708086)
> pcibios: BIOS version 3.00
> pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
> pci0: <PCI bus> on pcib0
> pci0: physical bus=0
> found-> vendor=0x8086, dev=0x2770, revid=0x02
> bus=0, slot=0, func=0
> class=06-00-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0
> ns)
> found-> vendor=0x8086, dev=0x2772, revid=0x02
> bus=0, slot=2, func=0
> class=03-00-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0
> ns)
> intpin=a, irq=3
> powerspec 2 supports D0 D3 current D0
> MSI supports 1 message
> map[10]: type Memory, range 32, base 0xfdf00000, size 19,
> enabled
> map[14]: type I/O Port, range 32, base 0xff00, size 3,
> enabled
> map[18]: type Prefetchable Memory, range 32, base
> 0xd0000000, size 28, enabled
> map[1c]: type Memory, range 32, base 0xfdf80000, size 18,
> enabled
> pcib0: slot 2 INTA routed to irq 16
> found-> vendor=0x8086, dev=0x27d0, revid=0x01
> bus=0, slot=28, func=0
> class=06-04-00, hdrtype=0x01, mfdev=1
> cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0
> ns)
> intpin=a, irq=3
> powerspec 2 supports D0 D3 current D0
> MSI supports 1 message
> pcib0: slot 28 INTA routed to irq 16
> found-> vendor=0x8086, dev=0x27e2, revid=0x01
> bus=0, slot=28, func=5
> class=06-04-00, hdrtype=0x01, mfdev=1
> cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0
> ns)
> intpin=b, irq=10
> powerspec 2 supports D0 D3 current D0
> MSI supports 1 message
> pcib0: slot 28 INTB routed to irq 17
> found-> vendor=0x8086, dev=0x27c8, revid=0x01
> bus=0, slot=29, func=0
> class=0c-03-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0
> ns)
> intpin=a, irq=6
> map[20]: type I/O Port, range 32, base 0xfe00, size 5,
> enabled
> pcib0: slot 29 INTA routed to irq 23
> found-> vendor=0x8086, dev=0x27c9, revid=0x01
> bus=0, slot=29, func=1
> class=0c-03-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0
> ns)
> intpin=b, irq=11
> map[20]: type I/O Port, range 32, base 0xfd00, size 5,
> enabled
> pcib0: slot 29 INTB routed to irq 19
> found-> vendor=0x8086, dev=0x27ca, revid=0x01
> bus=0, slot=29, func=2
> class=0c-03-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0
> ns)
> intpin=c, irq=5
> map[20]: type I/O Port, range 32, base 0xfc00, size 5,
> enabled
> pcib0: slot 29 INTC routed to irq 18
> found-> vendor=0x8086, dev=0x27cb, revid=0x01
> bus=0, slot=29, func=3
> class=0c-03-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0
> ns)
> intpin=d, irq=3
> map[20]: type I/O Port, range 32, base 0xfb00, size 5,
> enabled
> pcib0: slot 29 INTD routed to irq 16
> found-> vendor=0x8086, dev=0x27cc, revid=0x01
> bus=0, slot=29, func=7
> class=0c-03-20, hdrtype=0x00, mfdev=0
> cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0
> ns)
> intpin=a, irq=6
> powerspec 2 supports D0 D3 current D0
> map[10]: type Memory, range 32, base 0xfdfff000, size 10,
> enabled
> pcib0: slot 29 INTA routed to irq 23
> found-> vendor=0x8086, dev=0x244e, revid=0xe1
> bus=0, slot=30, func=0
> class=06-04-01, hdrtype=0x01, mfdev=0
> cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0
> ns)
> found-> vendor=0x8086, dev=0x27b8, revid=0x01
> bus=0, slot=31, func=0
> class=06-01-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0107, statreg=0x0210, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0
> ns)
> found-> vendor=0x8086, dev=0x27c0, revid=0x01
> bus=0, slot=31, func=2
> class=01-01-8a, hdrtype=0x00, mfdev=0
> cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0
> ns)
> intpin=b, irq=255
> powerspec 2 supports D0 D3 current D0
> map[20]: type I/O Port, range 32, base 0xf800, size 4,
> enabled
> map[24]: type Memory, range 32, base 0xfdffc000, size 10,
> enabled
> found-> vendor=0x8086, dev=0x27da, revid=0x01
> bus=0, slot=31, func=3
> class=0c-05-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0
> ns)
> intpin=b, irq=11
> map[20]: type I/O Port, range 32, base 0x500, size 5,
> enabled
> pcib0: slot 31 INTB routed to irq 19
> vgapci0: <VGA-compatible display> port 0xff00-0xff07 mem 0xfdf00000-
> 0xfdf7ffff,0xd0000000-0xdfffffff,0xfdf80000-0xfdfbffff irq 16 at
> device 2.0 on pci0
> agp0: <Intel 82945G (945G GMCH) SVGA controller> on vgapci0
> vgapci0: Reserved 0x80000 bytes for rid 0x10 type 3 at 0xfdf00000
> vgapci0: Reserved 0x80000 bytes for rid 0x10 type 3 at 0xfdf00000
> vgapci0: Reserved 0x40000 bytes for rid 0x1c type 3 at 0xfdf80000
> vgapci0: Reserved 0x10000000 bytes for rid 0x18 type 3 at
> 0xd0000000
> agp0: detected 7932k stolen memory
> agp0: aperture size is 256M
> pcib1: <MPTable PCI-PCI bridge> irq 16 at device 28.0 on pci0
> pcib1: secondary bus 1
> pcib1: subordinate bus 9
> pcib1: I/O decode 0x6000-0xcfff
> pcib1: memory decode 0xfd700000-0xfdefffff
> pcib1: prefetched decode 0xfce00000-0xfd4fffff
> pci1: <PCI bus> on pcib1
> pci1: physical bus=1
> found-> vendor=0x10b5, dev=0x8524, revid=0xbb
> bus=1, slot=0, func=0
> class=06-04-00, hdrtype=0x01, mfdev=0
> cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0
> ns)
> intpin=a, irq=3
> powerspec 1 supports D0 D3 current D0
> MSI supports 1 message, 64 bit
> map[10]: type Memory, range 32, base 0xfdee0000, size 17,
> enabled
> pcib1: requested memory range 0xfdee0000-0xfdefffff: good
> pcib1: slot 0 INTA routed to irq 16
> pcib2: <MPTable PCI-PCI bridge> mem 0xfdee0000-0xfdefffff irq 16 at
> device 0.0 on pci1
> pcib2: secondary bus 2
> pcib2: subordinate bus 9
> pcib2: I/O decode 0x6000-0xcfff
> pcib2: memory decode 0xfd700000-0xfddfffff
> pcib2: prefetched decode 0xfce00000-0xfd4fffff
> pci2: <PCI bus> on pcib2
> pci2: physical bus=2
> found-> vendor=0x10b5, dev=0x8524, revid=0xbb
> bus=2, slot=1, func=0
> class=06-04-00, hdrtype=0x01, mfdev=0
> cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0
> ns)
> intpin=a, irq=3
> powerspec 1 supports D0 D3 current D0
> MSI supports 1 message, 64 bit
> pcib2: slot 1 INTA routed to irq 16
> found-> vendor=0x10b5, dev=0x8524, revid=0xbb
> bus=2, slot=2, func=0
> class=06-04-00, hdrtype=0x01, mfdev=0
> cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0
> ns)
> intpin=a, irq=3
> powerspec 1 supports D0 D3 current D0
> MSI supports 1 message, 64 bit
> pcib2: slot 2 INTA routed to irq 16
> found-> vendor=0x10b5, dev=0x8524, revid=0xbb
> bus=2, slot=3, func=0
> class=06-04-00, hdrtype=0x01, mfdev=0
> cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0
> ns)
> intpin=a, irq=3
> powerspec 1 supports D0 D3 current D0
> MSI supports 1 message, 64 bit
> pcib2: slot 3 INTA routed to irq 16
> found-> vendor=0x10b5, dev=0x8524, revid=0xbb
> bus=2, slot=8, func=0
> class=06-04-00, hdrtype=0x01, mfdev=0
> cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0
> ns)
> intpin=a, irq=3
> powerspec 1 supports D0 D3 current D0
> MSI supports 1 message, 64 bit
> pcib2: slot 8 INTA routed to irq 16
> found-> vendor=0x10b5, dev=0x8524, revid=0xbb
> bus=2, slot=9, func=0
> class=06-04-00, hdrtype=0x01, mfdev=0
> cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0
> ns)
> intpin=a, irq=3
> powerspec 1 supports D0 D3 current D0
> MSI supports 1 message, 64 bit
> pcib2: slot 9 INTA routed to irq 16
> found-> vendor=0x10b5, dev=0x8524, revid=0xbb
> bus=2, slot=10, func=0
> class=06-04-00, hdrtype=0x01, mfdev=0
> cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0
> ns)
> intpin=a, irq=3
> powerspec 1 supports D0 D3 current D0
> MSI supports 1 message, 64 bit
> pcib2: slot 10 INTA routed to irq 16
> found-> vendor=0x10b5, dev=0x8524, revid=0xbb
> bus=2, slot=11, func=0
> class=06-04-00, hdrtype=0x01, mfdev=0
> cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0
> ns)
> intpin=a, irq=3
> powerspec 1 supports D0 D3 current D0
> MSI supports 1 message, 64 bit
> pcib2: slot 11 INTA routed to irq 16
> pcib3: <PCI-PCI bridge> irq 16 at device 1.0 on pci2
> pcib3: secondary bus 3
> pcib3: subordinate bus 3
> pcib3: I/O decode 0xc000-0xcfff
> pcib3: memory decode 0xfdd00000-0xfddfffff
> pcib3: prefetched decode 0xfd400000-0xfd4fffff
> pci3: <PCI bus> on pcib3
> pci3: physical bus=3
> pcib4: <PCI-PCI bridge> irq 16 at device 2.0 on pci2
> pcib4: secondary bus 4
> pcib4: subordinate bus 4
> pcib4: I/O decode 0xb000-0xbfff
> pcib4: memory decode 0xfdc00000-0xfdcfffff
> pcib4: prefetched decode 0xfd300000-0xfd3fffff
> pci4: <PCI bus> on pcib4
> pci4: physical bus=4
> pcib5: <PCI-PCI bridge> irq 16 at device 3.0 on pci2
> pcib5: secondary bus 5
> pcib5: subordinate bus 5
> pcib5: I/O decode 0xa000-0xafff
> pcib5: memory decode 0xfdb00000-0xfdbfffff
> pcib5: prefetched decode 0xfd200000-0xfd2fffff
> pci5: <PCI bus> on pcib5
> pci5: physical bus=5
> pcib6: <MPTable PCI-PCI bridge> irq 16 at device 8.0 on pci2
> pcib6: secondary bus 6
> pcib6: subordinate bus 6
> pcib6: I/O decode 0x9000-0x9fff
> pcib6: memory decode 0xfda00000-0xfdafffff
> pcib6: prefetched decode 0xfd100000-0xfd1fffff
> pci6: <PCI bus> on pcib6
> pci6: physical bus=6
> found-> vendor=0x8086, dev=0x105e, revid=0x06
> bus=6, slot=0, func=0
> class=02-00-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0
> ns)
> intpin=a, irq=255
> powerspec 2 supports D0 D3 current D0
> MSI supports 1 message, 64 bit
> map[10]: type Memory, range 32, base 0, size 17, memory
> disabled
> map[14]: type Memory, range 32, base 0, size 17, memory
> disabled
> map[18]: type I/O Port, range 32, base 0, size 5, port
> disabled
> found-> vendor=0x8086, dev=0x105e, revid=0x06
> bus=6, slot=0, func=1
> class=02-00-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0
> ns)
> intpin=b, irq=255
> powerspec 2 supports D0 D3 current D0
> MSI supports 1 message, 64 bit
> map[10]: type Memory, range 32, base 0, size 17, memory
> disabled
> map[14]: type Memory, range 32, base 0, size 17, memory
> disabled
> map[18]: type I/O Port, range 32, base 0, size 5, port
> disabled
> em0: <Intel(R) PRO/1000 Network Connection Version - 6.5.3> at
> device 0.0 on pci6
> pcib6: em0 requested memory range 0xfda00000-0xfdafffff: good
> pcib2: em0 requested memory range 0xfda00000-0xfdafffff: good
> pcib1: em0 requested memory range 0xfda00000-0xfdafffff: good
> em0: Lazy allocation of 0x20000 bytes rid 0x10 type 3 at
> 0xfda00000
> pcib6: slot 0 INTA routed to irq 16
> em0: bpf attached
> em0: Ethernet address: 00:10:f3:0c:5b:36
> ioapic0: routing intpin 16 (PCI IRQ 16) to vector 48
> em0: [FILTER]
> em1: <Intel(R) PRO/1000 Network Connection Version - 6.5.3> at
> device 0.1 on pci6
> pcib6: em1 requested memory range 0xfda00000-0xfdafffff: good
> pcib2: em1 requested memory range 0xfda00000-0xfdafffff: good
> pcib1: em1 requested memory range 0xfda00000-0xfdafffff: good
> em1: Lazy allocation of 0x20000 bytes rid 0x10 type 3 at
> 0xfda20000
> pcib6: slot 0 INTB routed to irq 17
> em1: bpf attached
> em1: Ethernet address: 00:10:f3:0c:5b:37
> ioapic0: routing intpin 17 (PCI IRQ 17) to vector 49
> em1: [FILTER]
> pcib7: <MPTable PCI-PCI bridge> irq 16 at device 9.0 on pci2
> pcib7: secondary bus 7
> pcib7: subordinate bus 7
> pcib7: I/O decode 0x8000-0x8fff
> pcib7: memory decode 0xfd900000-0xfd9fffff
> pcib7: prefetched decode 0xfd000000-0xfd0fffff
> pci7: <PCI bus> on pcib7
> pci7: physical bus=7
> found-> vendor=0x8086, dev=0x105e, revid=0x06
> bus=7, slot=0, func=0
> class=02-00-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0
> ns)
> intpin=a, irq=255
> powerspec 2 supports D0 D3 current D0
> MSI supports 1 message, 64 bit
> map[10]: type Memory, range 32, base 0, size 17, memory
> disabled
> map[14]: type Memory, range 32, base 0, size 17, memory
> disabled
> map[18]: type I/O Port, range 32, base 0, size 5, port
> disabled
> found-> vendor=0x8086, dev=0x105e, revid=0x06
> bus=7, slot=0, func=1
> class=02-00-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0
> ns)
> intpin=b, irq=255
> powerspec 2 supports D0 D3 current D0
> MSI supports 1 message, 64 bit
> map[10]: type Memory, range 32, base 0, size 17, memory
> disabled
> map[14]: type Memory, range 32, base 0, size 17, memory
> disabled
> map[18]: type I/O Port, range 32, base 0, size 5, port
> disabled
> em2: <Intel(R) PRO/1000 Network Connection Version - 6.5.3> at
> device 0.0 on pci7
> pcib7: em2 requested memory range 0xfd900000-0xfd9fffff: good
> pcib2: em2 requested memory range 0xfd900000-0xfd9fffff: good
> pcib1: em2 requested memory range 0xfd900000-0xfd9fffff: good
> em2: Lazy allocation of 0x20000 bytes rid 0x10 type 3 at
> 0xfd900000
> pcib7: slot 0 INTA routed to irq 17
> em2: bpf attached
> em2: Ethernet address: 00:10:f3:0c:5b:38
> em2: [FILTER]
> em3: <Intel(R) PRO/1000 Network Connection Version - 6.5.3> at
> device 0.1 on pci7
> pcib7: em3 requested memory range 0xfd900000-0xfd9fffff: good
> pcib2: em3 requested memory range 0xfd900000-0xfd9fffff: good
> pcib1: em3 requested memory range 0xfd900000-0xfd9fffff: good
> em3: Lazy allocation of 0x20000 bytes rid 0x10 type 3 at
> 0xfd920000
> pcib7: slot 0 INTB routed to irq 18
> em3: bpf attached
> em3: Ethernet address: 00:10:f3:0c:5b:39
> ioapic0: routing intpin 18 (PCI IRQ 18) to vector 50
> em3: [FILTER]
> pcib8: <PCI-PCI bridge> irq 16 at device 10.0 on pci2
> pcib8: secondary bus 8
> pcib8: subordinate bus 8
> pcib8: I/O decode 0x7000-0x7fff
> pcib8: memory decode 0xfd800000-0xfd8fffff
> pcib8: prefetched decode 0xfcf00000-0xfcffffff
> pci8: <PCI bus> on pcib8
> pci8: physical bus=8
> pcib9: <MPTable PCI-PCI bridge> irq 16 at device 11.0 on pci2
> pcib9: secondary bus 9
> pcib9: subordinate bus 9
> pcib9: I/O decode 0x6000-0x6fff
> pcib9: memory decode 0xfd700000-0xfd7fffff
> pcib9: prefetched decode 0xfce00000-0xfcefffff
> pci9: <PCI bus> on pcib9
> pci9: physical bus=9
> found-> vendor=0x8086, dev=0x105e, revid=0x06
> bus=9, slot=0, func=0
> class=02-00-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0
> ns)
> intpin=a, irq=255
> powerspec 2 supports D0 D3 current D0
> MSI supports 1 message, 64 bit
> map[10]: type Memory, range 32, base 0, size 17, memory
> disabled
> map[14]: type Memory, range 32, base 0, size 17, memory
> disabled
> map[18]: type I/O Port, range 32, base 0, size 5, port
> disabled
> found-> vendor=0x8086, dev=0x105e, revid=0x06
> bus=9, slot=0, func=1
> class=02-00-00, hdrtype=0x00, mfdev=1
> cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0
> ns)
> intpin=b, irq=255
> powerspec 2 supports D0 D3 current D0
> MSI supports 1 message, 64 bit
> map[10]: type Memory, range 32, base 0, size 17, memory
> disabled
> map[14]: type Memory, range 32, base 0, size 17, memory
> disabled
> map[18]: type I/O Port, range 32, base 0, size 5, port
> disabled
> em4: <Intel(R) PRO/1000 Network Connection Version - 6.5.3> at
> device 0.0 on pci9
> pcib9: em4 requested memory range 0xfd700000-0xfd7fffff: good
> pcib2: em4 requested memory range 0xfd700000-0xfd7fffff: good
> pcib1: em4 requested memory range 0xfd700000-0xfd7fffff: good
> em4: Lazy allocation of 0x20000 bytes rid 0x10 type 3 at
> 0xfd700000
> pcib9: slot 0 INTA routed to irq 19
> em4: bpf attached
> em4: Ethernet address: 00:10:f3:0c:5b:34
> ioapic0: routing intpin 19 (PCI IRQ 19) to vector 51
> em4: [FILTER]
> em5: <Intel(R) PRO/1000 Network Connection Version - 6.5.3> at
> device 0.1 on pci9
> pcib9: em5 requested memory range 0xfd700000-0xfd7fffff: good
> pcib2: em5 requested memory range 0xfd700000-0xfd7fffff: good
> pcib1: em5 requested memory range 0xfd700000-0xfd7fffff: good
> em5: Lazy allocation of 0x20000 bytes rid 0x10 type 3 at
> 0xfd720000
> pcib9: slot 0 INTB routed to irq 16
> em5: bpf attached
> em5: Ethernet address: 00:10:f3:0c:5b:35
> em5: [FILTER]
> pcib10: <PCI-PCI bridge> irq 17 at device 28.5 on pci0
> pcib10: secondary bus 10
> pcib10: subordinate bus 12
> pcib10: I/O decode 0x4000-0x5fff
> pcib10: memory decode 0xfcc00000-0xfcdfffff
> pcib10: prefetched decode 0xfca00000-0xfcbfffff
> pci10: <PCI bus> on pcib10
> pci10: physical bus=10
> found-> vendor=0x8086, dev=0x0340, revid=0x09
> bus=10, slot=0, func=0
> class=06-04-00, hdrtype=0x01, mfdev=1
> cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0
> ns)
> powerspec 2 supports D0 D3 current D0
> MSI supports 1 message, 64 bit
> found-> vendor=0x8086, dev=0x0341, revid=0x09
> bus=10, slot=0, func=2
> class=06-04-00, hdrtype=0x01, mfdev=1
> cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0
> ns)
> powerspec 2 supports D0 D3 current D0
> MSI supports 1 message, 64 bit
> pcib11: <PCI-PCI bridge> at device 0.0 on pci10
> pcib11: secondary bus 11
> pcib11: subordinate bus 11
> pcib11: I/O decode 0x5000-0x5fff
> pcib11: memory decode 0xfcd00000-0xfcdfffff
> pcib11: prefetched decode 0xfcb00000-0xfcbfffff
> pci11: <PCI bus> on pcib11
> pci11: physical bus=11
> pcib12: <PCI-PCI bridge> at device 0.2 on pci10
> pcib12: secondary bus 12
> pcib12: subordinate bus 12
> pcib12: I/O decode 0x4000-0x4fff
> pcib12: memory decode 0xfcc00000-0xfccfffff
> pcib12: prefetched decode 0xfca00000-0xfcafffff
> pci12: <PCI bus> on pcib12
> pci12: physical bus=12
> uhci0: <UHCI (generic) USB controller> port 0xfe00-0xfe1f irq 23 at
> device 29.0 on pci0
> uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xfe00
> ioapic0: routing intpin 23 (PCI IRQ 23) to vector 52
> uhci0: [GIANT-LOCKED]
> uhci0: [ITHREAD]
> usb0: <UHCI (generic) USB controller> on uhci0
> usb0: USB revision 1.0
> uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on
> usb0
> uhub0: 2 ports with 2 removable, self powered
> uhci1: <UHCI (generic) USB controller> port 0xfd00-0xfd1f irq 19 at
> device 29.1 on pci0
> uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xfd00
> uhci1: [GIANT-LOCKED]
> uhci1: [ITHREAD]
> usb1: <UHCI (generic) USB controller> on uhci1
> usb1: USB revision 1.0
> uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on
> usb1
> uhub1: 2 ports with 2 removable, self powered
> uhci2: <UHCI (generic) USB controller> port 0xfc00-0xfc1f irq 18 at
> device 29.2 on pci0
> uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xfc00
> uhci2: [GIANT-LOCKED]
> uhci2: [ITHREAD]
> usb2: <UHCI (generic) USB controller> on uhci2
> usb2: USB revision 1.0
> uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on
> usb2
> uhub2: 2 ports with 2 removable, self powered
> uhci3: <UHCI (generic) USB controller> port 0xfb00-0xfb1f irq 16 at
> device 29.3 on pci0
> uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xfb00
> uhci3: [GIANT-LOCKED]
> uhci3: [ITHREAD]
> usb3: <UHCI (generic) USB controller> on uhci3
> usb3: USB revision 1.0
> uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on
> usb3
> uhub3: 2 ports with 2 removable, self powered
> ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfdfff000-
> 0xfdfff3ff irq 23 at device 29.7 on pci0
> ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfdfff000
> ehci0: [GIANT-LOCKED]
> ehci0: [ITHREAD]
> usb4: EHCI version 1.0
> usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
> usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
> usb4: USB revision 2.0
> uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on
> usb4
> uhub4: 8 ports with 8 removable, self powered
> pcib13: <MPTable PCI-PCI bridge> at device 30.0 on pci0
> pcib13: secondary bus 13
> pcib13: subordinate bus 13
> pcib13: I/O decode 0xd000-0xdfff
> pcib13: memory decode 0xfd600000-0xfd6fffff
> pcib13: prefetched decode 0xfd500000-0xfd5fffff
> pcib13: Subtractively decoded bridge.
> pci13: <PCI bus> on pcib13
> pci13: physical bus=13
> found-> vendor=0x8086, dev=0x1076, revid=0x05
> bus=13, slot=7, func=0
> class=02-00-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0007, statreg=0x0230, cachelnsz=16 (dwords)
> lattimer=0xfc (7560 ns), mingnt=0xff (63750 ns),
> maxlat=0x00 (0 ns)
> intpin=a, irq=10
> powerspec 2 supports D0 D3 current D0
> map[10]: type Memory, range 32, base 0xfd6e0000, size 17,
> enabled
> pcib13: requested memory range 0xfd6e0000-0xfd6fffff: good
> map[14]: type Memory, range 32, base 0xfd6c0000, size 17,
> enabled
> pcib13: requested memory range 0xfd6c0000-0xfd6dffff: good
> map[18]: type I/O Port, range 32, base 0xdf00, size 6,
> enabled
> pcib13: requested I/O range 0xdf00-0xdf3f: in range
> pcib13: slot 7 INTA routed to irq 17
> found-> vendor=0x8086, dev=0x1076, revid=0x05
> bus=13, slot=9, func=0
> class=02-00-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0007, statreg=0x0230, cachelnsz=16 (dwords)
> lattimer=0xfc (7560 ns), mingnt=0xff (63750 ns),
> maxlat=0x00 (0 ns)
> intpin=a, irq=11
> powerspec 2 supports D0 D3 current D0
> map[10]: type Memory, range 32, base 0xfd6a0000, size 17,
> enabled
> pcib13: requested memory range 0xfd6a0000-0xfd6bffff: good
> map[14]: type Memory, range 32, base 0xfd680000, size 17,
> enabled
> pcib13: requested memory range 0xfd680000-0xfd69ffff: good
> map[18]: type I/O Port, range 32, base 0xde00, size 6,
> enabled
> pcib13: requested I/O range 0xde00-0xde3f: in range
> pcib13: slot 9 INTA routed to irq 19
> em6: <Intel(R) PRO/1000 Network Connection Version - 6.5.3> port
> 0xdf00-0xdf3f mem 0xfd6e0000-0xfd6fffff,0xfd6c0000-0xfd6dffff irq 17
> at device 7.0 on pci13
> em6: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfd6e0000
> em6: Reserved 0x40 bytes for rid 0x18 type 4 at 0xdf00
> em6: bpf attached
> em6: Ethernet address: 00:10:f3:0c:5b:33
> em6: [FILTER]
> em7: <Intel(R) PRO/1000 Network Connection Version - 6.5.3> port
> 0xde00-0xde3f mem 0xfd6a0000-0xfd6bffff,0xfd680000-0xfd69ffff irq 19
> at device 9.0 on pci13
> em7: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfd6a0000
> em7: Reserved 0x40 bytes for rid 0x18 type 4 at 0xde00
> em7: bpf attached
> em7: Ethernet address: 00:10:f3:0c:5b:32
> em7: [FILTER]
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel ICH7 SATA300 controller> port 0x1f0-0x1f7,0x3f6,
> 0x170-0x177,0x376,0xf800-0xf80f mem 0xfdffc000-0xfdffc3ff at device
> 31.2 on pci0
> atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf800
> ata0: <ATA channel 0> on atapci0
> atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
> atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
> ata0: reset tp1 mask=03 ostat0=50 ostat1=00
> ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
> ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
> ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
> ioapic0: routing intpin 14 (ISA IRQ 14) to vector 53
> ata0: [MPSAFE]
> ata0: [ITHREAD]
> ata1: <ATA channel 1> on atapci0
> atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
> atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
> ata1: reset tp1 mask=03 ostat0=7f ostat1=7f
> ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata1: stat0=0x7f err=0xff lsb=0xff msb=0xff
> ata1: stat1=0x7f err=0xff lsb=0xff msb=0xff
> ata1: reset tp2 stat0=ff stat1=ff devices=0x0
> ioapic0: routing intpin 15 (ISA IRQ 15) to vector 54
> ata1: [MPSAFE]
> ata1: [ITHREAD]
> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> unknown: status reg test failed ff
> unknown: status reg test failed ff
> unknown: status reg test failed ff
> unknown: status reg test failed ff
> unknown: status reg test failed ff
> unknown: status reg test failed ff
> ex_isa_identify()
> ata: ata0 already exists; skipping it
> ata: ata1 already exists; skipping it
> pnp_identify: Trying Read_Port at 203
> pnp_identify: Trying Read_Port at 243
> pnp_identify: Trying Read_Port at 283
> pnp_identify: Trying Read_Port at 2c3
> pnp_identify: Trying Read_Port at 303
> pnp_identify: Trying Read_Port at 343
> pnp_identify: Trying Read_Port at 383
> pnp_identify: Trying Read_Port at 3c3
> PNP Identify complete
> pnpbios: 13 devices, largest 92 bytes
> PNP0200: adding dma mask 0x10
> PNP0200: adding io range 0-0xf, size=0x10, align=0
> PNP0200: adding io range 0x81-0x83, size=0x3, align=0
> PNP0200: adding io range 0x87-0x87, size=0x1, align=0
> PNP0200: adding io range 0x89-0x8b, size=0x3, align=0
> PNP0200: adding io range 0x8f-0x91, size=0x3, align=0
> PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0
> pnpbios: handle 1 device ID PNP0200 (0002d041)
> PNP0100: adding irq mask 0x1
> PNP0100: adding io range 0x40-0x43, size=0x4, align=0
> pnpbios: handle 2 device ID PNP0100 (0001d041)
> PNP0b00: adding irq mask 0x100
> PNP0b00: adding io range 0x70-0x71, size=0x2, align=0
> pnpbios: handle 3 device ID PNP0b00 (000bd041)
> PNP0303: adding irq mask 0x2
> PNP0303: adding io range 0x60-0x60, size=0x1, align=0
> PNP0303: adding io range 0x64-0x64, size=0x1, align=0
> pnpbios: handle 4 device ID PNP0303 (0303d041)
> PNP0800: adding io range 0x61-0x61, size=0x1, align=0
> pnpbios: handle 5 device ID PNP0800 (0008d041)
> PNP0c04: adding irq mask 0x2000
> PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0
> pnpbios: handle 6 device ID PNP0c04 (040cd041)
> INT0800: adding fixed memory32 range 0xffb80000-0xffbfffff,
> size=0x80000
> pnpbios: handle 7 device ID INT0800 (0008d425)
> PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
> PNP0c01: adding fixed memory32 range 0xffb00000-0xffb7ffff,
> size=0x80000
> PNP0c01: adding fixed memory32 range 0xfff00000-0xffffffff,
> size=0x100000
> PNP0c01: adding fixed memory32 range 0xfec00000-0xfec0ffff,
> size=0x10000
> PNP0c01: adding fixed memory32 range 0xfee00000-0xfee0ffff,
> size=0x10000
> PNP0c01: adding fixed memory32 range 0x100000-0xffffff,
> size=0xf00000
> pnpbios: handle 8 device ID PNP0c01 (010cd041)
> PNP0c02: adding fixed memory32 range 0xf0000-0xf3fff, size=0x4000
> PNP0c02: adding fixed memory32 range 0xf4000-0xf7fff, size=0x4000
> PNP0c02: adding fixed memory32 range 0xf8000-0xfffff, size=0x8000
> PNP0c02: adding fixed memory32 range 0xcc000-0xcffff, size=0x4000
> pnpbios: handle 9 device ID PNP0c02 (020cd041)
> PNP0a03: adding io range 0x290-0x29f, size=0x10, align=0
> PNP0a03: adding io range 0x4d0-0x4d1, size=0x2, align=0
> PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0
> PNP0a03: adding io range 0x400-0x4bf, size=0xc0, align=0
> pnpbios: handle 10 device ID PNP0a03 (030ad041)
> PNP0501: adding irq mask 0x10
> PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0
> pnpbios: handle 12 device ID PNP0501 (0105d041)
> PNP0400: adding irq mask 0x80
> PNP0400: adding io range 0x378-0x37f, size=0x8, align=0
> PNP0400: adding io range 0x778-0x77f, size=0x8, align=0
> pnpbios: handle 13 device ID PNP0400 (0004d041)
> sc: sc0 already exists; skipping it
> vga: vga0 already exists; skipping it
> isa_probe_children: disabling PnP devices
> isa_probe_children: probing non-PnP devices
> pmtimer0 on isa0
> orm0: <ISA Option ROM> at iomem 0xcc000-0xd3fff pnpid ORM0000 on
> isa0
> adv0: not probed (disabled)
> aha0: not probed (disabled)
> aic0: not probed (disabled)
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> kbd0: atkbd0, generic (0), config:0x0, flags:0x3f0000
> ioapic0: routing intpin 1 (ISA IRQ 1) to vector 55
> atkbd0: [GIANT-LOCKED]
> atkbd0: [ITHREAD]
> psm0: current command byte:0067
> psm0: strange result for test aux port (2).
> psm0: failed to reset the aux device.
> bt0: not probed (disabled)
> cs0: not probed (disabled)
> ed0: not probed (disabled)
> fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
> fe0: not probed (disabled)
> ie0: not probed (disabled)
> le0: not probed (disabled)
> ppc0: parallel port found at 0x378
> ppc0: using extended I/O port range
> ppc0: SPP
> ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
> ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
> ppbus0: <Parallel port bus> on ppc0
> plip0: <PLIP network interface> on ppbus0
> plip0: bpf attached
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> ioapic0: routing intpin 7 (ISA IRQ 7) to vector 56
> ppc0: [GIANT-LOCKED]
> ppc0: [ITHREAD]
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
> sio0: irq maps: 0x841 0x851 0x841 0x841
> sio0: irq maps: 0x841 0x851 0x841 0x841
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 16550A
> ioapic0: routing intpin 4 (ISA IRQ 4) to vector 57
> sio0: [FILTER]
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> sio1: irq maps: 0x841 0x841 0x841 0x841
> sio1: probe failed test(s): 0 1 2 4 6 7 9
> sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
> sio2: not probed (disabled)
> sio3: not probed (disabled)
> sn0: not probed (disabled)
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff
> on isa0
> vt0: not probed (disabled)
> isa_probe_children: probing PnP devices
> unknown: <PNP0303> can't assign resources (port)
> unknown: <PNP0303> at port 0x60 pnpid PNP0303 on isa0
> unknown: <PNP0800> failed to probe at port 0x61 pnpid PNP0800 on
> isa0
> unknown: <INT0800> failed to probe at iomem 0xffb80000-0xffbfffff
> pnpid INT0800 on isa0
> unknown: <PNP0c01> can't assign resources (memory)
> unknown: <PNP0c01> at iomem 0-0x9ffff pnpid PNP0c01 on isa0
> unknown: <PNP0c02> can't assign resources (memory)
> unknown: <PNP0c02> at iomem 0xf0000-0xf3fff,0xf4000-0xf7fff,0xf8000-
> 0xfffff,0xcc000-0xcffff pnpid PNP0c02 on isa0
> unknown: <PNP0501> can't assign resources (port)
> unknown: <PNP0501> at port 0x3f8-0x3ff pnpid PNP0501 on isa0
> unknown: <PNP0400> can't assign resources (port)
> unknown: <PNP0400> at port 0x378-0x37f pnpid PNP0400 on isa0
> ukbd0: <Avocent HP 336047-B21, class 0/0, rev 1.10/1.00, addr 2> on
> uhub0
> kbd2 at ukbd0
> kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000
> ums0: <Avocent HP 336047-B21, class 0/0, rev 1.10/1.00, addr 2> on
> uhub0
> ums0: 5 buttons and Z dir.
> Device configuration finished.
> procfs registered
> lapic: Divisor 2, Frequency 100003988 hz
> Timecounter "TSC" frequency 3200127568 Hz quality -100
> Timecounters tick every 1.000 msec
> lo0: bpf attached
> rr232x: no controller detected.
> ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
> ad0: 238475MB <Seagate ST3250820AS 3.AAE> at ata0-master SATA150
> ad0: 488397168 sectors [484521C/16H/63S] 16 sectors/interrupt 1
> depth queue
> GEOM: new disk ad0
> ad0: Intel check1 failed
> ad0: Adaptec check1 failed
> ad0: LSI (v3) check1 failed
> ad0: LSI (v2) check1 failed
> ad0: FreeBSD check1 failed
> ATA PseudoRAID loaded
> SMP: AP CPU #1 Launched!
> cpu1 AP:
> ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR:
> 0xffffffff
> lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR:
> 0x000001ff
> timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm:
> 0x00010000
> Trying to mount root from ufs:/dev/ad0s1a
> start_init: trying /sbin/init
> em4: Link is up 1000 Mbps Full Duplex
> em6: Link is up 10 Mbps Half Duplex
> em7: Link is up 100 Mbps Full Duplex
>
>
> _______________________________________________
> freebsd-net at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-net
> To unsubscribe, send any mail to "freebsd-net-unsubscribe at freebsd.org"
>
More information about the freebsd-net
mailing list