FreeBSD Firewall + NAT Traversal + IPsec

[Vince]

I do this with the cisco VPN client (to PIX), 
I am firewalling with pf. 

Client --- FreeBSD firewall+NAT using pf --- internet - PIX

The only problem I had was that isakmp needs to come from 
port 500 as well as go to port 500 so I needed to add a rule 
To stop pf changing the source port. My nat rules are: 
nat on $ext_if inet proto { tcp, udp } from $int_net port = 500 \ 
	to any -> ($ext_if:0) port 500
nat on $ext_if from $int_net to any -> $ext_addr1

Havent tried checkpoint though.

Vince


> -----Original Message-----
> From: owner-freebsd-net at freebsd.org 
> [mailto:owner-freebsd-net at freebsd.org] On Behalf Of John Mok
> Sent: 07 April 2005 17:15
> To: freebsd-net at freebsd.org
> Subject: FreeBSD Firewall + NAT Traversal + IPsec
> 
> Hi,
> 
> I'm new to FreeBSD. Is it possible make a FreeBSD box with 
> firewall + NAT, such that client PC(s) from the NATed 
> internal network could connect to a VPN gateway on the Internet :-
> 
>   client PC ----- FreeBSD Firewall + NAT ---- Internet ---- 
> IPsec VPN gateway
> 192.168.x.x/16                                              (e.g. 
> Checkpoint FW-1)
> (VPN client)
> 
> I hope someone could help to advise what software is required 
> on the FreeBSD box to NAT traversal work and where to get the 
> HOWTO(s)?
> 
> Thanks a lot.
> 
> John Mok
> 
> _______________________________________________
> freebsd-net at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-net
> To unsubscribe, send any mail to "freebsd-net-unsubscribe at freebsd.org"
>