FreeVRRPD problem

[Sebastien Petit]

Hi Bruno,

Perhaps rls interfaces doesn't support monitored circuits. Try to add this
option : monitoredcircuits = no
If this does not work, try to set useVMAC to no and sendgratuitousarp to
yes.

Regards,
Sebastien.
--
spe at selectbourse.net

----- Original Message -----
From: "Bruno Afonso" <brunomiguel at dequim.ist.utl.pt>
To: <freebsd-net at freebsd.org>
Cc: <spe at bsdfr.org>
Sent: Thursday, June 24, 2004 6:35 AM
Subject: FreeVRRPD problem


> Hello,
>
> I'm trying to have failover with a couple boxes and they're basically
> doing NAT and firewalling. 1 box has a couple fxp and the other a couple
> rls. Is this supposed to be a problem for freevrrpd?
>
> Only fxp box actually can use the fail-over ips. The backup box cannot
> use them if we start freevrrp deamon without starting on the master
> first and it's impossible to have network access to.
>
> Further more, if we have master and start backup, it all goes ok. If
> master goes down, backup never takes over and backup is from now one
> impossible to access.
>
> Main box: 5.2.1-p5
> backup box: 5.0
>
> Config for the fxp box:
>
> [VRID]
> serverid = 2
> interface = fxp0
> priority = 255
> addr = 10.10.0.1/32
> password = passie
> useVMAC = yes
> carriertimeout = 10
> spanningtreelatency = 40
> #sendgratuitousarp = yes
> #masterscript = "/usr/local/bin/master_script.sh"
> #backupscript = "/usr/local/bin/backup_script.sh"
> vridsdep = 1
>
> [VRID]
> serverid = 1
> interface = fxp1
> priority = 255
> addr = x.x.x.253/32
> password = passie
> useVMAC = yes
> carriertimeout = 10
> spanningtreelatency = 40
> #sendgratuitousarp = yes
> #masterscript = "/usr/local/bin/master_script.sh"
> #backupscript = "/usr/local/bin/backup_script.sh"
> vridsdep = 2
>
>
> backup box:
>
> [VRID]
> serverid = 2
> interface = rl0
> priority = 250
> addr = 10.10.0.1/32
> password = passie
> useVMAC = yes
> carriertimeout = 10
> spanningtreelatency = 40
> #sendgratuitousarp = yes
> #masterscript = "/usr/local/bin/master_script.sh"
> #backupscript = "/usr/local/bin/backup_script.sh"
> vridsdep = 1
>
> [VRID]
> serverid = 1
> interface = rl1
> priority = 250
> addr = x.x.x.253/32
> password = passie
> useVMAC = yes
> carriertimeout = 10
> spanningtreelatency = 40
> #sendgratuitousarp = yes
> #masterscript = "/usr/local/bin/master_script.sh"
> #backupscript = "/usr/local/bin/backup_script.sh"
> vridsdep = 2
>
>
> I'm using freevrrpd from CVS.
>
> On both machines, I get in /var/log/messages, gazillions of
>
> "all errors are cleared on interface xxx"
>
> There's not any particular information in backup box saying something
> went wrong...
>
> Any ideas ?
>
> BA
>
> --
> Bruno Miguel Afonso
> Biological Eng. student
> D.E.Q. @ I.S.T. - Portugal
> GnuPG Public key: http://dequim.ist.utl.pt/~bruno/gpg
> _______________________________________________
> freebsd-net at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-net
> To unsubscribe, send any mail to "freebsd-net-unsubscribe at freebsd.org"
>
>