PPPoE
Yohan
yohanphilip at yahoo.com
Mon Jun 21 08:44:10 GMT 2004
Gleb,
Thanks for the reply. i have attached my ppp.conf and
ppp.log as requested. I have tried setting carrier /
ctsrts on/off and various other permutations /
combinations. The best i proceeded till is ...
Jun 19 13:00:26 chennai ppp[178]: tun0: Phase:
Received NGM_PPPOE_ACNAME (hook "BANYAN")
Jun 19 13:00:26 chennai ppp[178]: tun0: Debug: Waiting
for carrier
Jun 19 13:00:27 chennai ppp[178]: tun0: Timer: Select
returns -1
Jun 19 13:00:27 chennai ppp[178]: tun0: Timer: ----
Begin of Timer Service List---
Jun 19 13:00:27 chennai ppp[178]: tun0: Timer:
physical throughput timer[0x80ba068]: freq = 1.00s,
next = 0.00s, state = running
Jun 19 13:00:27 chennai ppp[178]: tun0: Timer: ----
End of Timer Service List ---
Jun 19 13:00:27 chennai ppp[178]: tun0: Timer:
timer_Start: Inserting physical throughput
timer[0x80ba068]
Jun 19 13:00:27 chennai ppp[178]: tun0: Debug: Waiting
for carrier
regards
Yohan
ppp.conf
default:
set log all # Phase Chat LCP IPCP CCP tun command
Debug
nat enable yes
nat same_ports yes
nat use_sockets yes
set redial 15 28800
set reconnect 15 28800
bsnl:
set device PPPoE:rl0
set mru 1492
set mtu 1492
set speed sync
enable lqr
# set lqrperiod 5
set cd off # set cd 5! # set cd 600
set dial
set login
set timeout 0
set authname *******
set authkey *******
set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0
0.0.0.0
delete all
add default HISADDR
enable dns
set ctsrts off # set ctsrts on
ppp.log
Jun 21 12:17:44 chennai ppp[180]: Phase: Using
interface: tun0
Jun 21 12:17:44 chennai ppp[180]: Phase: deflink:
Created in closed state
Jun 21 12:17:44 chennai ppp[180]: tun0: Command:
default: nat enable yes
Jun 21 12:17:44 chennai ppp[180]: tun0: Command:
default: nat same_ports yes
Jun 21 12:17:44 chennai ppp[180]: tun0: Command:
default: nat use_sockets yes
Jun 21 12:17:44 chennai ppp[180]: tun0: Command:
default: set redial 15 28800
Jun 21 12:17:44 chennai ppp[180]: tun0: Command:
default: set reconnect 15 28800
Jun 21 12:17:44 chennai ppp[180]: tun0: ID0:
0x282948a0 = fopen("/etc/ppp/ppp.conf", "r")
Jun 21 12:17:44 chennai ppp[180]: tun0: Debug:
ReadSystem: Checking bsnl (/etc/ppp/ppp.conf).
Jun 21 12:17:44 chennai ppp[180]: tun0: Command: bsnl:
set device PPPoE:rl0
Jun 21 12:17:44 chennai ppp[180]: tun0: Command: bsnl:
set mru 1492
Jun 21 12:17:44 chennai ppp[180]: tun0: Command: bsnl:
set mtu 1492
Jun 21 12:17:44 chennai ppp[180]: tun0: Command: bsnl:
set speed sync
Jun 21 12:17:44 chennai ppp[180]: tun0: Command: bsnl:
enable lqr
Jun 21 12:17:44 chennai ppp[180]: tun0: Command: bsnl:
set cd off
Jun 21 12:17:44 chennai ppp[180]: tun0: Command: bsnl:
set dial
Jun 21 12:17:44 chennai ppp[180]: tun0: Command: bsnl:
set login
Jun 21 12:17:44 chennai ppp[180]: tun0: Command: bsnl:
set timeout 0
Jun 21 12:17:44 chennai ppp[180]: tun0: Command: bsnl:
set authname hddias33
Jun 21 12:17:44 chennai ppp[180]: tun0: Command: bsnl:
set authkey ********
Jun 21 12:17:44 chennai ppp[180]: tun0: Command: bsnl:
set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
Jun 21 12:17:44 chennai ppp[180]: tun0: Command: bsnl:
delete all
Jun 21 12:17:44 chennai ppp[180]: tun0: Debug:
route_IfDelete (8)
Jun 21 12:17:44 chennai ppp[180]: tun0: Command: bsnl:
add default HISADDR
Jun 21 12:17:44 chennai ppp[180]: tun0: ID0: 9 =
socket(17, 3, 0)
Jun 21 12:17:44 chennai ppp[180]: tun0: ID0: 140 =
write(9, data, 140)
Jun 21 12:17:44 chennai ppp[180]: tun0: Debug: wrote
140: cmd = Add, dst = 0.0.0.0/0, gateway = 10.0.0.2
Jun 21 12:17:44 chennai ppp[180]: tun0: Command: bsnl:
enable dns
Jun 21 12:17:44 chennai ppp[180]: tun0: Command: bsnl:
set ctsrts off
Jun 21 12:17:44 chennai ppp[181]: tun0: ID0:
0x282948a0 = fopen("/var/run/tun0.pid", "w")
Jun 21 12:17:44 chennai ppp[181]: tun0: Phase: PPP
Started (ddial mode).
Jun 21 12:17:44 chennai ppp[181]: tun0: Phase: bundle:
Establish
Jun 21 12:17:44 chennai ppp[181]: tun0: Phase:
deflink: closed -> opening
Jun 21 12:17:44 chennai ppp[181]: tun0: ID0: 0 =
NgMkSockNode("", &cs, &ds)
Jun 21 12:17:44 chennai ppp[181]: tun0: Debug: List of
netgraph node ``rl0:'' (id 1) hooks:
Jun 21 12:17:44 chennai ppp[181]: tun0: Debug:
Creating PPPoE netgraph node [1]:orphans -> ethernet
Jun 21 12:17:44 chennai ppp[181]: tun0: Debug:
Connecting netgraph socket .:tun0 -> rl0:orphans:tun0
Jun 21 12:17:44 chennai ppp[181]: tun0: ID0: 2 =
socket(2, 2, 0)
Jun 21 12:17:44 chennai ppp[181]: tun0: ID0: 0 =
ioctl(2, 3223349521, 0xbfbfed50)
Jun 21 12:17:44 chennai ppp[181]: tun0: ID0: 0 =
ioctl(2, 2149607696, 0xbfbfed50)
Jun 21 12:17:44 chennai ppp[181]: tun0: Debug: Sending
PPPOE_CONNECT to .:tun0
Jun 21 12:17:44 chennai ppp[181]: tun0: Warning:
deflink: Carrier must be set, using ``set cd 5!''
Jun 21 12:17:44 chennai ppp[181]: tun0: Debug: Found
the following interfaces:
Jun 21 12:17:44 chennai ppp[181]: tun0: Debug: Index
1, name "rl0"
Jun 21 12:17:44 chennai ppp[181]: tun0: Debug: Index
2, name "rl1"
Jun 21 12:17:44 chennai ppp[181]: tun0: Debug: Index
3, name "lp0"
Jun 21 12:17:44 chennai ppp[181]: tun0: Debug: Index
4, name "lo0"
Jun 21 12:17:44 chennai ppp[181]: tun0: Debug: Index
5, name "ppp0"
Jun 21 12:17:44 chennai ppp[181]: tun0: Debug: Index
6, name "sl0"
Jun 21 12:17:44 chennai ppp[181]: tun0: Debug: Index
7, name "faith0"
Jun 21 12:17:44 chennai ppp[181]: tun0: Debug: Index
8, name "tun0"
Jun 21 12:17:44 chennai ppp[181]: tun0: Timer:
timer_Start: Inserting physical throughput
timer[0x80ba068]
Jun 21 12:17:44 chennai ppp[181]: tun0: Phase:
deflink: Connected!
Jun 21 12:17:44 chennai ppp[181]: tun0: Phase:
deflink: opening -> dial
Jun 21 12:17:44 chennai ppp[181]: tun0: Phase:
deflink: dial -> carrier
Jun 21 12:17:44 chennai ppp[181]: tun0: Debug: Waiting
for carrier
Jun 21 12:17:45 chennai ppp[181]: tun0: Timer: Select
returns -1
Jun 21 12:17:45 chennai ppp[181]: tun0: Timer: ----
Begin of Timer Service List---
Jun 21 12:17:45 chennai ppp[181]: tun0: Timer:
physical throughput timer[0x80ba068]: freq = 1.00s,
next = 0.00s, state = running
Jun 21 12:17:45 chennai ppp[181]: tun0: Timer: ----
End of Timer Service List ---
Jun 21 12:17:45 chennai ppp[181]: tun0: Timer:
timer_Start: Inserting physical throughput
timer[0x80ba068]
Jun 21 12:17:45 chennai ppp[181]: tun0: Debug: Waiting
for carrier
Jun 21 12:17:46 chennai ppp[181]: tun0: Timer: Select
returns -1
Jun 21 12:17:46 chennai ppp[181]: tun0: Timer: ----
Begin of Timer Service List---
Jun 21 12:17:46 chennai ppp[181]: tun0: Timer:
physical throughput timer[0x80ba068]: freq = 1.00s,
next = 0.00s, state = running
Jun 21 12:17:46 chennai ppp[181]: tun0: Timer: ----
End of Timer Service List ---
Jun 21 12:17:46 chennai ppp[181]: tun0: Timer:
timer_Start: Inserting physical throughput
timer[0x80ba068]
Jun 21 12:17:46 chennai ppp[181]: tun0: Debug: Waiting
for carrier
Jun 21 12:17:47 chennai ppp[181]: tun0: Timer: Select
returns -1
Jun 21 12:17:47 chennai ppp[181]: tun0: Timer: ----
Begin of Timer Service List---
Jun 21 12:17:47 chennai ppp[181]: tun0: Timer:
physical throughput timer[0x80ba068]: freq = 1.00s,
next = 0.00s, state = running
Jun 21 12:17:47 chennai ppp[181]: tun0: Timer: ----
End of Timer Service List ---
Jun 21 12:17:47 chennai ppp[181]: tun0: Timer:
timer_Start: Inserting physical throughput
timer[0x80ba068]
Jun 21 12:17:47 chennai ppp[181]: tun0: Debug: Waiting
for carrier
Jun 21 12:17:48 chennai ppp[181]: tun0: Timer: Select
returns -1
Jun 21 12:17:48 chennai ppp[181]: tun0: Timer: ----
Begin of Timer Service List---
Jun 21 12:17:48 chennai ppp[181]: tun0: Timer:
physical throughput timer[0x80ba068]: freq = 1.00s,
next = 0.00s, state = running
Jun 21 12:17:48 chennai ppp[181]: tun0: Timer: ----
End of Timer Service List ---
Jun 21 12:17:48 chennai ppp[181]: tun0: Timer:
timer_Start: Inserting physical throughput
timer[0x80ba068]
Jun 21 12:17:48 chennai ppp[181]: tun0: Debug: Waiting
for carrier
Jun 21 12:17:49 chennai ppp[181]: tun0: Timer: Select
returns -1
Jun 21 12:17:49 chennai ppp[181]: tun0: Timer: ----
Begin of Timer Service List---
Jun 21 12:17:49 chennai ppp[181]: tun0: Timer:
physical throughput timer[0x80ba068]: freq = 1.00s,
next = 0.00s, state = running
Jun 21 12:17:49 chennai ppp[181]: tun0: Timer: ----
End of Timer Service List ---
Jun 21 12:17:49 chennai ppp[181]: tun0: Timer:
timer_Start: Inserting physical throughput
timer[0x80ba068]
Jun 21 12:17:49 chennai ppp[181]: tun0: Phase:
deflink: Disconnected!
Jun 21 12:17:49 chennai ppp[181]: tun0: Phase:
deflink: carrier -> hangup
Jun 21 12:17:49 chennai ppp[181]: tun0: Debug:
deflink: Close
Jun 21 12:17:49 chennai ppp[181]: tun0: Phase:
deflink: Connect time: 5 secs: 0 octets in, 0 octets
out
Jun 21 12:17:49 chennai ppp[181]: tun0: Phase:
deflink: 0 packets in, 0 packets out
Jun 21 12:17:49 chennai ppp[181]: tun0: Phase: total
0 bytes/sec, peak 0 bytes/sec on Mon Jun 21 12:17:44
2004
Jun 21 12:17:49 chennai ppp[181]: tun0: Phase:
deflink: hangup -> opening
Jun 21 12:17:49 chennai ppp[181]: tun0: Timer:
timer_Start: Inserting dial timer[0x80b7d44]
Jun 21 12:17:49 chennai ppp[181]: tun0: Phase:
deflink: Enter pause (15) for redialing.
Jun 21 12:18:04 chennai ppp[181]: tun0: Timer: Select
returns -1
Jun 21 12:18:04 chennai ppp[181]: tun0: Timer: ----
Begin of Timer Service List---
Jun 21 12:18:04 chennai ppp[181]: tun0: Timer: dial
timer[0x80b7d44]: freq = 15.00s, next = 0.00s, state =
running
Jun 21 12:18:04 chennai ppp[181]: tun0: Timer: ----
End of Timer Service List ---
Jun 21 12:18:04 chennai ppp[181]: tun0: Chat: deflink:
Redial timer expired.
Jun 21 12:18:04 chennai ppp[181]: tun0: ID0: 0 =
NgMkSockNode("", &cs, &ds)
Jun 21 12:18:04 chennai ppp[181]: tun0: Debug: List of
netgraph node ``rl0:'' (id 1) hooks:
Jun 21 12:18:04 chennai ppp[181]: tun0: Debug: Found
orphans -> ethernet
Jun 21 12:18:04 chennai ppp[181]: tun0: Debug:
Connecting netgraph socket .:tun0 -> [4]::tun0
Jun 21 12:18:04 chennai ppp[181]: tun0: ID0: 2 =
socket(2, 2, 0)
Jun 21 12:18:04 chennai ppp[181]: tun0: ID0: 0 =
ioctl(2, 3223349521, 0xbfbfed50)
Jun 21 12:18:04 chennai ppp[181]: tun0: ID0: 0 =
ioctl(2, 2149607696, 0xbfbfed50)
Jun 21 12:18:04 chennai ppp[181]: tun0: Debug: Sending
PPPOE_CONNECT to .:tun0
Jun 21 12:18:04 chennai ppp[181]: tun0: Warning:
deflink: Carrier must be set, using ``set cd 5!''
Jun 21 12:18:04 chennai ppp[181]: tun0: Timer:
timer_Start: Inserting physical throughput
timer[0x80ba068]
Jun 21 12:18:04 chennai ppp[181]: tun0: Phase:
deflink: Connected!
Jun 21 12:18:04 chennai ppp[181]: tun0: Phase:
deflink: opening -> dial
Jun 21 12:18:04 chennai ppp[181]: tun0: Phase:
deflink: dial -> carrier
Jun 21 12:18:04 chennai ppp[181]: tun0: Debug: Waiting
for carrier
Jun 21 12:18:05 chennai ppp[181]: tun0: Timer: Select
returns -1
Jun 21 12:18:05 chennai ppp[181]: tun0: Timer: ----
Begin of Timer Service List---
Jun 21 12:18:05 chennai ppp[181]: tun0: Timer:
physical throughput timer[0x80ba068]: freq = 1.00s,
next = 0.00s, state = running
Jun 21 12:18:05 chennai ppp[181]: tun0: Timer: ----
End of Timer Service List ---
Jun 21 12:18:05 chennai ppp[181]: tun0: Timer:
timer_Start: Inserting physical throughput
timer[0x80ba068]
Jun 21 12:18:05 chennai ppp[181]: tun0: Debug: Waiting
for carrier
Jun 21 12:18:06 chennai ppp[181]: tun0: Timer: Select
returns -1
Jun 21 12:18:06 chennai ppp[181]: tun0: Timer: ----
Begin of Timer Service List---
Jun 21 12:18:06 chennai ppp[181]: tun0: Timer:
physical throughput timer[0x80ba068]: freq = 1.00s,
next = 0.00s, state = running
Jun 21 12:18:06 chennai ppp[181]: tun0: Timer: ----
End of Timer Service List ---
Jun 21 12:18:06 chennai ppp[181]: tun0: Timer:
timer_Start: Inserting physical throughput
timer[0x80ba068]
Jun 21 12:18:06 chennai ppp[181]: tun0: Debug: Waiting
for carrier
Jun 21 12:18:07 chennai ppp[181]: tun0: Timer: Select
returns -1
Jun 21 12:18:07 chennai ppp[181]: tun0: Timer: ----
Begin of Timer Service List---
Jun 21 12:18:07 chennai ppp[181]: tun0: Timer:
physical throughput timer[0x80ba068]: freq = 1.00s,
next = 0.00s, state = running
Jun 21 12:18:07 chennai ppp[181]: tun0: Timer: ----
End of Timer Service List ---
Jun 21 12:18:07 chennai ppp[181]: tun0: Timer:
timer_Start: Inserting physical throughput
timer[0x80ba068]
Jun 21 12:18:07 chennai ppp[181]: tun0: Debug: Waiting
for carrier
Jun 21 12:18:08 chennai ppp[181]: tun0: Timer: Select
returns -1
Jun 21 12:18:08 chennai ppp[181]: tun0: Timer: ----
Begin of Timer Service List---
Jun 21 12:18:08 chennai ppp[181]: tun0: Timer:
physical throughput timer[0x80ba068]: freq = 1.00s,
next = 0.00s, state = running
Jun 21 12:18:08 chennai ppp[181]: tun0: Timer: ----
End of Timer Service List ---
Jun 21 12:18:08 chennai ppp[181]: tun0: Timer:
timer_Start: Inserting physical throughput
timer[0x80ba068]
Jun 21 12:18:08 chennai ppp[181]: tun0: Debug: Waiting
for carrier
Jun 21 12:18:09 chennai ppp[181]: tun0: Timer: Select
returns -1
Jun 21 12:18:09 chennai ppp[181]: tun0: Timer: ----
Begin of Timer Service List---
Jun 21 12:18:09 chennai ppp[181]: tun0: Timer:
physical throughput timer[0x80ba068]: freq = 1.00s,
next = 0.00s, state = running
--- Gleb Smirnoff <glebius at cell.sick.ru> wrote:
> On Sun, Jun 20, 2004 at 09:05:19AM -0700, Yohan
> wrote:
> Y> Im using PPPoE / FreeBSD 4.9 with a DSL line
> provided by my ISP. The same modem / line works fine
> / connects to the internet on a Windows 2000
> machine. But when i use it with my FreeBSD machine
> using ppp i get the following message in my ppp.log
> "-> Waiting for carrier" - "Last message repeated n
> times". I have followed the FreeBSD handbook
> instructions for setting up PPPoE. Have also tried
> various other articles related to PPPoE setup on
> FreeBSD. I have tried various other options like
> disabling carrier and others but i am unable to get
> past the "no carrier" problem. Any help will be
> greatly apreciated.
>
> Please show full ppp.log starting from the moment
> when you started dailing.
> Please also show your ppp.conf
>
> --
> Totus tuus, Glebius.
> GLEBIUS-RIPN GLEB-RIPE
>
__________________________________
Do you Yahoo!?
Yahoo! Mail - 50x more storage than other providers!
http://promotions.yahoo.com/new_mail
More information about the freebsd-net
mailing list