ste (IEEE 802.3u iface) problem

[Benjamin von Mossner]

Hi again,

> I am missing something here or are there problems with this
> interface? Do i need to force a mode (full/half duplex *shrug*)?
> The switch is working (unfortunally my partner is using m$ and
> its working there ...).

ok its done. I needed to force the interface on 100baseTX.

bensons:/home/benny# ifconfig ste0 10.0.0.200/32 media 100baseTX

ste0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet6 fe80::205:5dff:fe8a:a62c%ste0 prefixlen 64 scopeid 0x2 
        inet 10.0.0.200 netmask 0xffffffff broadcast 10.0.0.200
        ether 00:05:5d:8a:a6:2c
        media: Ethernet 100baseTX
        status: active

Thx anyway.

Regards Benny
-- 
/"\ ASCII RIBBON CAMPAIGN                  | Benjamin von Mossner
\ / AGAINST HTML MAIL                      | benny at vonmossner.de
 X  
/ \ multiple exclamation marks are a sure sign of a diseased mind