kern/158979: [snd_uadio] snd_uaudio fails to initialize built-in
microphone in Logitech Webcam C160
Dmytro Pryanyshnikov
lynx.ripe at gmail.com
Sun Jul 17 10:00:30 UTC 2011
The following reply was made to PR kern/158979; it has been noted by GNATS.
From: Dmytro Pryanyshnikov <lynx.ripe at gmail.com>
To: bug-followup at FreeBSD.org, lynx.ripe at gmail.com,
Hans Petter Selasky <hselasky at c2i.net>
Cc:
Subject: Re: kern/158979: [snd_uadio] snd_uaudio fails to initialize built-in
microphone in Logitech Webcam C160
Date: Sun, 17 Jul 2011 12:31:25 +0300
Hello!
>From: Hans Petter Selasky <hselasky at c2i.net>
>Date: Sun, 17 Jul 2011 09:45:41 +0200
>Hi,
>Can you try and see if any of the quirks mentioned at the following link
>helps:
> http://wiki.freebsd.org/WebcamCompat
Well, it helps only partially. Indeed, after
1) plugging in my Logitech Webcam C160;
2) running 'pwcview' and exiting from it;
3) issuing 'usbconfig -d ugen4.2 do_request 0x22 0x01 0x100 0x86 0x03
0x80 0xBB 0x00'
timeout problem has gone, BUT the sensitivity of the microphone
becomes very low (I could only hear knocks on the camera hull, but
almost can't hear my own voice in the recorded samples). And
/dev/mixer3, which corresponds to the webcam microphone, doesn't
affect it's sensitivity at all:
dmitry at lynx$ mixer -f /dev/mixer3
Mixer vol is currently set to 75:75
Mixer pcm is currently set to 75:75
dmitry at lynx$ mixer -f /dev/mixer3 vol 100 pcm 100
Setting the mixer vol from 75:75 to 100:100.
Setting the mixer pcm from 75:75 to 100:100.
(doesn't change mic sensitivity)
dmitry at lynx$ mixer -f /dev/mixer3 vol 0 pcm 0
Setting the mixer vol from 100:100 to 0:0.
Setting the mixer pcm from 100:100 to 0:0.
(doesn't change mic sensitivity)
OTOH after using my workaround involving attaching device to the
Linux kernel, microphone sensitivity is normal (I hear all surrounding
sounds in the room).
--
Sincerely, Dmytro
More information about the freebsd-multimedia
mailing list