kern/131785: [snd_hda] [panic] sysctl hw.snd.maxautovchans
panics with snd_hda
Dirk Meyer
dirk.meyer at dinoex.sub.org
Mon Mar 30 04:00:09 PDT 2009
The following reply was made to PR kern/131785; it has been noted by GNATS.
From: dirk.meyer at dinoex.sub.org (Dirk Meyer)
To: FreeBSD-gnats-submit at FreeBSD.org
Cc:
Subject: Re: kern/131785: [snd_hda] [panic] sysctl hw.snd.maxautovchans
panics with snd_hda
Date: Mon, 30 Mar 2009 12:49:28 +0200
Alexander Motin schrieb:,
> Try now please.
here the boot -v
the load of the sound module was successful, Thanks.
kind regards Dirk
- Dirk Meyer, Im Grund 4, 34317 Habichtswald, Germany
- [dirk.meyer at dinoex.sub.org],[dirk.meyer at guug.de],[dinoex at FreeBSD.org]
http://people.freebsd.org/~dinoex/errorlogs/
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-CURRENT #1: Mon Mar 30 06:35:55 CEST 2009
root at book64.dinoex.sub.de:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80f8c000.
Preloaded acpi_dsdt "/boot/acpidump.aml" at 0xffffffff80f8c258.
Preloaded elf obj module "/boot/kernel/acpi_ibm.ko" at 0xffffffff80f8c2b0.
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1995009552 Hz
CPU: Intel(R) Pentium(R) Dual CPU T3200 @ 2.00GHz (1995.01-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x6fd Stepping = 13
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
Cores per package: 2
usable memory = 4238155776 (4041 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages)
0x0000000000fba000 - 0x00000000b4a32fff, 3014103040 bytes (735865 pages)
0x00000000bd6b9000 - 0x00000000bd7b1fff, 1019904 bytes (249 pages)
0x00000000bd80f000 - 0x00000000bd906fff, 1015808 bytes (248 pages)
0x00000000bdb0f000 - 0x00000000bdb17fff, 36864 bytes (9 pages)
0x00000000bdb1f000 - 0x00000000bdb62fff, 278528 bytes (68 pages)
0x0000000100000000 - 0x000000013ffeffff, 1073676288 bytes (262128 pages)
avail memory = 4067794944 (3879 MB)
ACPI APIC Table: <PTLTD APIC >
INTR: Adding local APIC 1 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 1
ULE: setup cpu 0
ULE: setup cpu 1
ACPI: RSDP @ 0x0xf7190/0x0024 (v 2 LENOVO)
ACPI: XSDT @ 0x0xbdbf624e/0x006C (v 1 LENOVO TP-6G 0x00000000 LTP 0x00000000)
ACPI: FACP @ 0x0xbdbe8000/0x00F4 (v 3 LENOVO TP-6G 0x00000001 ALAN 0x00000001)
ACPI: DSDT @ 0x0xbdbe9000/0x693C (v 2 LENOVO TP-6G 0x00000001 INTL 0x20050624)
ACPI: FACS @ 0x0xbdb9efc0/0x0040
ACPI: HPET @ 0x0xbdbfcd86/0x0038 (v 1 LENOVO TP-6G 0x00000001 LOHR 0x0000005A)
ACPI: MCFG @ 0x0xbdbfcdbe/0x003C (v 1 LENOVO TP-6G 0x00000001 LOHR 0x0000005A)
ACPI: SLIC @ 0x0xbdbfcdfa/0x0176 (v 1 LENOVO TP-6G 0x00000001 TBD 0x00000001)
ACPI: APIC @ 0x0xbdbfcf70/0x0068 (v 1 PTLTD APIC 0x00000000 LTP 0x00000000)
ACPI: BOOT @ 0x0xbdbfcfd8/0x0028 (v 1 PTLTD $SBFTBL$ 0x00000000 LTP 0x00000001)
ACPI: SSDT @ 0x0xbdbe7000/0x0655 (v 1 PmRef CpuPm 0x00003000 INTL 0x20050624)
ACPI: SSDT @ 0x0xbdbe6000/0x0259 (v 1 PmRef Cpu0Tst 0x00003000 INTL 0x20050624)
ACPI: SSDT @ 0x0xbdbe5000/0x020F (v 1 PmRef ApTst 0x00003000 INTL 0x20050624)
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400
wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
null: <null device, zero device>
io: <I/O>
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (Mar 30 2009 06:35:46)
acpi0: <LENOVO TP-6G> on motherboard
ACPI: Overriding _OS definition with "Windows 2006"
ACPI: Table DSDT replaced by host OS
ACPI: DSDT @ 0x0/0x732F (v 2 LENOVO TP-6G 0x00000001 INTL 0x20070320)
PCIe: Memory Mapped configuration base @ 0xe0000000
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xfffffffe4000a000 pa 0x4000
AcpiOsDerivePciId: \_SB_.PCI0.HBUS -> bus 0 dev 0 func 0
AcpiOsDerivePciId: \_SB_.PCI0.RP01.J380.PCFG -> bus 2 dev 0 func 0
AcpiOsDerivePciId: \_SB_.PCI0.LPCB.LPC0 -> bus 0 dev 31 func 0
AcpiOsDerivePciId: \_SB_.PCI0.LPCB.LPC1 -> bus 0 dev 31 func 0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: vend: 0x8086 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route 64-bit
Timecounter "HPET" frequency 14318180 Hz quality 900
ACPI timer: 0/3 0/3 0/3 0/3 0/3 0/3 0/3 0/3 0/3 0/3 -> 0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x62,0x66 on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 1 3 4 5 6 7 10 12 14 15
Validation 0 5 N 0 1 3 4 5 6 7 10 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 1 3 4 5 6 7 11 12 14 15
Validation 0 11 N 0 1 3 4 5 6 7 11 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 3 N 0 1 3 4 5 6 7 10 12 14 15
Validation 0 3 N 0 1 3 4 5 6 7 10 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 1 3 4 5 6 7 11 12 14 15
Validation 0 255 N 0 1 3 4 5 6 7 11 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 7 N 0 1 3 4 5 6 7 10 12 14 15
Validation 0 7 N 0 1 3 4 5 6 7 10 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 1 3 4 5 6 7 11 12 14 15
Validation 0 11 N 0 1 3 4 5 6 7 11 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 1 3 4 5 6 7 10 12 14 15
Validation 0 10 N 0 1 3 4 5 6 7 10 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 4 N 0 1 3 4 5 6 7 11 12 14 15
Validation 0 4 N 0 1 3 4 5 6 7 11 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x8086, dev=0x2a40, revid=0x07
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2a42, revid=0x07
domain=0, bus=0, slot=2, func=0
class=03-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
map[10]: type Memory, range 64, base 0xf4000000, size 22, enabled
map[18]: type Prefetchable Memory, range 64, base 0xd0000000, size 28, enabled
map[20]: type I/O Port, range 32, base 0x1800, size 3, enabled
pcib0: matched entry for 0.2.INTA
pcib0: slot 2 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x2a43, revid=0x07
domain=0, bus=0, slot=2, func=1
class=03-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 3 supports D0 D3 current D0
map[10]: type Memory, range 64, base 0xf4400000, size 20, enabled
found-> vendor=0x8086, dev=0x2937, revid=0x03
domain=0, bus=0, slot=26, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
map[20]: type I/O Port, range 32, base 0x1820, size 5, enabled
pcib0: matched entry for 0.26.INTA
pcib0: slot 26 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x2938, revid=0x03
domain=0, bus=0, slot=26, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
map[20]: type I/O Port, range 32, base 0x1840, size 5, enabled
pcib0: matched entry for 0.26.INTB
pcib0: slot 26 INTB hardwired to IRQ 21
found-> vendor=0x8086, dev=0x2939, revid=0x03
domain=0, bus=0, slot=26, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=7
map[20]: type I/O Port, range 32, base 0x1860, size 5, enabled
pcib0: matched entry for 0.26.INTC
pcib0: slot 26 INTC hardwired to IRQ 20
found-> vendor=0x8086, dev=0x293c, revid=0x03
domain=0, bus=0, slot=26, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=7
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xf4a04800, size 10, enabled
pcib0: matched entry for 0.26.INTC
pcib0: slot 26 INTC hardwired to IRQ 20
found-> vendor=0x8086, dev=0x293e, revid=0x03
domain=0, bus=0, slot=27, func=0
class=04-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xf4a00000, size 14, enabled
pcib0: matched entry for 0.27.INTA
pcib0: slot 27 INTA hardwired to IRQ 22
found-> vendor=0x8086, dev=0x2940, revid=0x03
domain=0, bus=0, slot=28, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 17
found-> vendor=0x8086, dev=0x2942, revid=0x03
domain=0, bus=0, slot=28, func=1
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
intpin=b, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTB
pcib0: slot 28 INTB hardwired to IRQ 16
found-> vendor=0x8086, dev=0x2944, revid=0x03
domain=0, bus=0, slot=28, func=2
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
intpin=c, irq=3
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTC
pcib0: slot 28 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x2946, revid=0x03
domain=0, bus=0, slot=28, func=3
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
intpin=d, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTD
pcib0: slot 28 INTD hardwired to IRQ 19
found-> vendor=0x8086, dev=0x294a, revid=0x03
domain=0, bus=0, slot=28, func=5
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
intpin=b, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTB
pcib0: slot 28 INTB hardwired to IRQ 16
found-> vendor=0x8086, dev=0x2934, revid=0x03
domain=0, bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=4
map[20]: type I/O Port, range 32, base 0x1880, size 5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found-> vendor=0x8086, dev=0x2935, revid=0x03
domain=0, bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
map[20]: type I/O Port, range 32, base 0x18a0, size 5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
found-> vendor=0x8086, dev=0x2936, revid=0x03
domain=0, bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=3
map[20]: type I/O Port, range 32, base 0x18c0, size 5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x293a, revid=0x03
domain=0, bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=4
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xf4a04c00, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found-> vendor=0x8086, dev=0x2448, revid=0x93
domain=0, bus=0, slot=30, func=0
class=06-04-01, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2919, revid=0x03
domain=0, bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2929, revid=0x03
domain=0, bus=0, slot=31, func=2
class=01-06-01, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 16 messages
map[10]: type I/O Port, range 32, base 0x1818, size 3, enabled
map[14]: type I/O Port, range 32, base 0x180c, size 2, enabled
map[18]: type I/O Port, range 32, base 0x1810, size 3, enabled
map[1c]: type I/O Port, range 32, base 0x1808, size 2, enabled
map[20]: type I/O Port, range 32, base 0x18e0, size 5, enabled
map[24]: type Memory, range 32, base 0xf4a04000, size 11, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 19
found-> vendor=0x8086, dev=0x2930, revid=0x03
domain=0, bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=10
map[10]: type Memory, range 64, base 0, size 8, enabled
map[20]: type I/O Port, range 32, base 0x1c00, size 5, enabled
pcib0: matched entry for 0.31.INTC
pcib0: slot 31 INTC hardwired to IRQ 19
vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 0xf4000000-0xf43fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
agp0: <Intel GM45 SVGA controller> on vgapci0
vgapci0: Reserved 0x10000000 bytes for rid 0x18 type 3 at 0xd0000000
vgapci0: Reserved 0x400000 bytes for rid 0x10 type 3 at 0xf4000000
agp0: detected 32764k stolen memory
agp0: aperture size is 256M
vgapci1: <VGA-compatible display> mem 0xf4400000-0xf44fffff at device 2.1 on pci0
uhci0: <Intel 82801I (ICH9) USB controller> port 0x1820-0x183f irq 16 at device 26.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1820
ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 49
uhci0: [MPSAFE]
uhci0: [ITHREAD]
uhci0: LegSup = 0x3000
usbus0: <Intel 82801I (ICH9) USB controller> on uhci0
uhci1: <Intel 82801I (ICH9) USB controller> port 0x1840-0x185f irq 21 at device 26.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1840
ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 50
uhci1: [MPSAFE]
uhci1: [ITHREAD]
usbus1: <Intel 82801I (ICH9) USB controller> on uhci1
uhci2: <Intel 82801I (ICH9) USB controller> port 0x1860-0x187f irq 20 at device 26.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1860
ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 0 vector 51
uhci2: [MPSAFE]
uhci2: [ITHREAD]
usbus2: <Intel 82801I (ICH9) USB controller> on uhci2
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xf4a04800-0xf4a04bff irq 20 at device 26.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xf4a04800
ehci0: [MPSAFE]
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <Intel 82801I (ICH9) USB 2.0 controller> on ehci0
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pcib1: domain 0
pcib1: secondary bus 2
pcib1: subordinate bus 2
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xf4500000-0xf45fffff
pcib1: no prefetched decode
pci2: <ACPI PCI bus> on pcib1
pci2: domain=0, physical bus=2
found-> vendor=0x197b, dev=0x2382, revid=0x00
domain=0, bus=2, slot=0, func=0
class=08-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
map[10]: type Memory, range 32, base 0xf4500000, size 8, enabled
pcib1: requested memory range 0xf4500000-0xf45000ff: good
pcib1: matched entry for 2.0.INTA
pcib1: slot 0 INTA hardwired to IRQ 16
found-> vendor=0x197b, dev=0x2381, revid=0x00
domain=0, bus=2, slot=0, func=2
class=08-05-01, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
map[10]: type Memory, range 32, base 0xf4500400, size 8, enabled
pcib1: requested memory range 0xf4500400-0xf45004ff: good
pcib1: matched entry for 2.0.INTA
pcib1: slot 0 INTA hardwired to IRQ 16
found-> vendor=0x197b, dev=0x2383, revid=0x00
domain=0, bus=2, slot=0, func=3
class=08-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
map[10]: type Memory, range 32, base 0xf4500800, size 8, enabled
pcib1: requested memory range 0xf4500800-0xf45008ff: good
pcib1: matched entry for 2.0.INTA
pcib1: slot 0 INTA hardwired to IRQ 16
pci2: <base peripheral> at device 0.0 (no driver attached)
pci2: <base peripheral, SD host controller> at device 0.2 (no driver attached)
pci2: <base peripheral> at device 0.3 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0
pcib2: domain 0
pcib2: secondary bus 3
pcib2: subordinate bus 3
pcib2: I/O decode 0xf000-0xfff
pcib2: no prefetched decode
pci3: <ACPI PCI bus> on pcib2
pci3: domain=0, physical bus=3
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pcib3: domain 0
pcib3: secondary bus 4
pcib3: subordinate bus 4
pcib3: I/O decode 0xf000-0xfff
pcib3: memory decode 0xf4700000-0xf47fffff
pcib3: no prefetched decode
pci4: <ACPI PCI bus> on pcib3
pci4: domain=0, physical bus=4
found-> vendor=0x8086, dev=0x4237, revid=0x00
domain=0, bus=4, slot=0, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=3
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xf4700000, size 13, enabled
pcib3: requested memory range 0xf4700000-0xf4701fff: good
pcib3: matched entry for 4.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 18
pci4: <network> at device 0.0 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pcib4: domain 0
pcib4: secondary bus 5
pcib4: subordinate bus 6
pcib4: I/O decode 0x2000-0x2fff
pcib4: memory decode 0xf0000000-0xf3ffffff
pcib4: prefetched decode 0xf6000000-0xf7ffffff
pci5: <ACPI PCI bus> on pcib4
pci5: domain=0, physical bus=5
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pcib5: domain 0
pcib5: secondary bus 7
pcib5: subordinate bus 7
pcib5: I/O decode 0xf000-0xfff
pcib5: memory decode 0xf4600000-0xf46fffff
pcib5: no prefetched decode
pci7: <ACPI PCI bus> on pcib5
pci7: domain=0, physical bus=7
found-> vendor=0x14e4, dev=0x1713, revid=0x02
domain=0, bus=7, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xf4600000, size 16, enabled
pcib5: requested memory range 0xf4600000-0xf460ffff: good
pcib5: matched entry for 7.0.INTA
pcib5: slot 0 INTA hardwired to IRQ 17
bge0: <Broadcom BCM5906 A2, ASIC rev. 0xc002> mem 0xf4600000-0xf460ffff irq 17 at device 0.0 on pci7
bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xf4600000
bge0: adjust device control 0x2000 -> 0x5000
bge0: attempting to allocate 1 MSI vectors (1 supported)
bge0: using IRQ 256 for MSI
bge0: CHIP ID 0xc0020000; ASIC REV 0x0c; CHIP REV 0xc0; PCI-E
miibus0: <MII bus> on bge0
brgphy0: <BCM5906 10/100baseTX PHY> PHY 1 on miibus0
brgphy0: OUI 0x000af7, model 0x0004, rev. 0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bge0: bpf attached
bge0: Ethernet address: 00:1e:ec:9c:88:87
msi: Assigning MSI IRQ 256 to local APIC 0 vector 52
bge0: [MPSAFE]
bge0: [ITHREAD]
uhci3: <Intel 82801I (ICH9) USB controller> port 0x1880-0x189f irq 23 at device 29.0 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1880
ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 53
uhci3: [MPSAFE]
uhci3: [ITHREAD]
usbus4: <Intel 82801I (ICH9) USB controller> on uhci3
uhci4: <Intel 82801I (ICH9) USB controller> port 0x18a0-0x18bf irq 19 at device 29.1 on pci0
uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0x18a0
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 54
uhci4: [MPSAFE]
uhci4: [ITHREAD]
usbus5: <Intel 82801I (ICH9) USB controller> on uhci4
uhci5: <Intel 82801I (ICH9) USB controller> port 0x18c0-0x18df irq 18 at device 29.2 on pci0
uhci5: Reserved 0x20 bytes for rid 0x20 type 4 at 0x18c0
ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 55
uhci5: [MPSAFE]
uhci5: [ITHREAD]
usbus6: <Intel 82801I (ICH9) USB controller> on uhci5
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xf4a04c00-0xf4a04fff irq 23 at device 29.7 on pci0
ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0xf4a04c00
ehci1: [MPSAFE]
ehci1: [ITHREAD]
usbus7: EHCI version 1.0
usbus7: <Intel 82801I (ICH9) USB 2.0 controller> on ehci1
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib6: domain 0
pcib6: secondary bus 8
pcib6: subordinate bus 8
pcib6: I/O decode 0xf000-0xfff
pcib6: no prefetched decode
pcib6: Subtractively decoded bridge.
pci8: <ACPI PCI bus> on pcib6
pci8: domain=0, physical bus=8
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel (ID=29298086) AHCI controller> port 0x1818-0x181f,0x180c-0x180f,0x1810-0x1817,0x1808-0x180b,0x18e0-0x18ff mem 0xf4a04000-0xf4a047ff irq 19 at device 31.2 on pci0
atapci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x18e0
atapci0: Reserved 0x800 bytes for rid 0x24 type 3 at 0xf4a04000
atapci0: [MPSAFE]
atapci0: [ITHREAD]
atapci0: AHCI Version 01.20 controller with 4 ports PM not supported
ata2: <ATA channel 0> on atapci0
ata2: AHCI reset...
ata2: SATA connect time=10ms
ata2: ready wait time=6ms
ata2: software reset port 0...
ata2: ready wait time=0ms
ata2: SIGNATURE: 00000101
ata2: AHCI reset done: devices=00000001
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: AHCI reset...
ata3: SATA connect time=0ms
ata3: ready wait time=21ms
ata3: software reset port 0...
ata3: ready wait time=0ms
ata3: SIGNATURE: eb140101
ata3: AHCI reset done: devices=00010000
ata3: [MPSAFE]
ata3: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us)
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 56
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 57
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model GlidePoint, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
cpu0: <ACPI CPU> on acpi0
ACPI Warning (tbutils-0243): Incorrect checksum in table [ ] - 44, should be 41 [20070320]
ACPI Error (tbinstal-0222): Table has invalid signature [ ], must be SSDT or PSDT [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\_PR_.CPU0.GCAP] (Node 0xffffff0001662760), AE_BAD_SIGNATURE
ACPI Error (psparse-0626): Method parse/execution failed [\_PR_.CPU0._PDC] (Node 0xffffff00016627e0), AE_BAD_SIGNATURE
ACPI Error (dsopcode-0350): No pointer back to NS node in buffer obj 0xffffff0004416380 [20070320]
ACPI Exception (dswexec-0556): AE_AML_INTERNAL, While resolving operands for [OpcodeName unavailable] [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\_PR_.CPU0._OSC] (Node 0xffffff00016627c0), AE_AML_INTERNAL
cpu0: switching to generic Cx mode
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6130c2b06000c2b
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
ACPI Warning (tbutils-0243): Incorrect checksum in table [usr/] - 6E, should be 3E [20070320]
ACPI Error (tbinstal-0222): Table has invalid signature [usr/], must be SSDT or PSDT [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\_PR_.CPU1.APPT] (Node 0xffffff0001662680), AE_BAD_SIGNATURE
ACPI Error (psparse-0626): Method parse/execution failed [\_PR_.CPU1.GCAP] (Node 0xffffff00016626c0), AE_BAD_SIGNATURE
ACPI Error (psparse-0626): Method parse/execution failed [\_PR_.CPU1._PDC] (Node 0xffffff0001662700), AE_BAD_SIGNATURE
ACPI Error (dsopcode-0350): No pointer back to NS node in buffer obj 0xffffff0004401a80 [20070320]
ACPI Exception (dswexec-0556): AE_AML_INTERNAL, While resolving operands for [OpcodeName unavailable] [20070320]
ACPI Error (psparse-0626): Method parse/execution failed [\_PR_.CPU1._OSC] (Node 0xffffff00016626e0), AE_AML_INTERNAL
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6130c2b06000c2b
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
ex_isa_identify()
ahc_isa_probe 1: ioport 0x1c00 alloc failed
isa_probe_children: disabling PnP devices
atkbdc: atkbdc0 already exists; skipping it
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcf7ff,0xdc000-0xdffff,0xe0000-0xe17ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
uart0: <ns8250> failed to probe at port 0x3f8-0x3ff irq 4 on isa0
uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0
uart2: not probed (disabled)
uart3: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 255844 -> 100000
procfs registered
lapic: Divisor 2, Frequency 83125410 hz
Timecounter "TSC" frequency 1995009552 Hz quality -100
Timecounters tick every 1.000 msec
lo0: bpf attached
hptrr: no controller detected.
ata2: Identifying devices: 00000001
ata2: New devices: 00000001
usbus7: 480Mbps High Speed USB v2.0
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
battery0: battery initialization start
acpi_acad0: acline initialization start
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad4: 238475MB <WDC WD2500BEVS-88UST0 01.01A01> at ata2-master SATA150
ad4: 488397168 sectors [484521C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad4
ugen7.1: <Intel> at usbus7
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
ugen0.1: <Intel> at usbus0
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub7: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
ad4: Intel check1 failed
acpi: bad write to port 0x080 (32), val 0x726f6d61
AcpiOsDerivePciId: \_SB_.PCI0.RP01.PXCS -> bus 0 dev 28 func 0
ad4: Adaptec check1 failed
ad4: LSI (v3) check1 failed
ad4: LSI (v2) check1 failed
ad4: FreeBSD check1 failedAcpiOsDerivePciId: \_SB_.PCI0.RP02.PXCS -> bus 0 dev 28 func 1
AcpiOsDerivePciId: \_SB_.PCI0.RP03.PXCS -> bus 0 dev 28 func 2
ata3: Identifying devices: 00010000
ata3: New devices: 00010000
ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ata3: device_reset timeout=1580us
acd0: <HL-DT-ST DVDRAM GSA-T50N/RV06> DVDR drive at ata3 as master
acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, SATA150
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 1 vector 48
ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 1 vector 49
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 1 vector 50
ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 1 vector 51
msi: Assigning MSI IRQ 256 to local APIC 1 vector 52
WARNING: WITNESS option enabled, expect reduced performance.
GEOM: ad4s3: geometry does not match label (255h,63s != 16h,63s).
AcpiOsDerivePciId: \_SB_.PCI0.RP04.PXCS -> bus 0 dev 28 func 3
AcpiOsDerivePciId: \_SB_.PCI0.RP05.PXCS -> bus 0 dev 28 func 4
AcpiOsDerivePciId: \_SB_.PCI0.RP06.PXCS -> bus 0 dev 28 func 5
GEOM_LABEL: Label for provider ad4s3 is ufsid/49a0326b0f417a7c.
GEOM_LABEL: Label for provider ad4s1a is ufsid/49a0326ab899464f.
GEOM_LABEL: Label for provider ad4s1d is ufsid/49a032737dfc2e90.
GEOM_LABEL: Label for provider ad4s1e is ufsid/49a03275fee815d0.
acpi: bad write to port 0x080 (32), val 0x726f6d62
GEOM_LABEL: Label for provider ad4s1f is ufsid/49a03273f07f84d9.
GEOM_LABEL: Label for provider ad4s2a is ufsid/49a0326ad263fa3b.
GEOM_LABEL: Label for provider ad4s2d is ufsid/49a0326a17952cd1.
GEOM_LABEL: Label for provider ad4s2e is ufsid/49a0326b7fa5d802.
GEOM_LABEL: Label for provider ad4s2f is ufsid/49a0326af6ccace1.
GEOM: ufsid/49a0326b0f417a7c: geometry does not match label (255h,63s != 16h,63s).
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
Root mount waiting for: usbus7 usbus6 usbus5 usbus4 usbus3
uhub5: 2 ports with 2 removable, self powered
Root mount waiting for: usbus7 usbus6 usbus5 usbus3
uhub6: 2 ports with 2 removable, self powered
Root mount waiting for: usbus7 usbus6 usbus3
uhub7: 2 ports with 2 removable, self powered
Root mount waiting for: usbus7 usbus3
last message repeated 2 times
uhub0: 6 ports with 6 removable, self powered
uhub4: 6 ports with 6 removable, self powered
Root mount waiting for: usbus7
ugen7.2: <Vimicro Corp.> at usbus7
Trying to mount root from ufs:/dev/ad4s2a
ct_to_ts([2009-03-30 10:37:03]) = 1238409423.000000000
start_init: trying /sbin/init
Entropy harvesting:
interrupts
ethernet
point_to_point
kickstart
.
GEOM_LABEL: Label ufsid/49a0326ad263fa3b removed.
/dev/ad4s2a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad4s2a: clean, 251562 free (1730 frags, 31229 blocks, 0.3% fragmentation)
GEOM_LABEL: Label for provider ad4s2a is ufsid/49a0326ad263fa3b.
GEOM_LABEL: Label ufsid/49a0326a17952cd1 removed.
/dev/ad4s2d: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad4s2d: clean, 253805 free (29 frags, 31722 blocks, 0.0% fragmentation)
GEOM_LABEL: Label for provider ad4s2d is ufsid/49a0326a17952cd1.
GEOM_LABEL: Label ufsid/49a0326b7fa5d802 removed.
/dev/ad4s2e: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad4s2e: clean, 444449 free (3545 frags, 55113 blocks, 0.7% fragmentation)
GEOM_LABEL: Label for provider ad4s2e is ufsid/49a0326b7fa5d802.
GEOM_LABEL: Label ufsid/49a0326af6ccace1 removed.
/dev/ad4s2f: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad4s2f: clean, 8805198 free (92998 frags, 1089025 blocks, 0.8% fragmentation)
GEOM_LABEL: Label for provider ad4s2f is ufsid/49a0326af6ccace1.
GEOM_LABEL: Label ufsid/49a0326ab899464f removed.
/dev/ad4s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad4s1a: clean, 90408 free (4320 frags, 10761 blocks, 0.9% fragmentation)
GEOM_LABEL: Label for provider ad4s1a is ufsid/49a0326ab899464f.
GEOM_LABEL: Label ufsid/49a032737dfc2e90 removed.
/dev/ad4s1d: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad4s1d: clean, 253791 free (31 frags, 31720 blocks, 0.0% fragmentation)
GEOM_LABEL: Label for provider ad4s1d is ufsid/49a032737dfc2e90.
GEOM_LABEL: Label ufsid/49a03275fee815d0 removed.
/dev/ad4s1e: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad4s1e: clean, 261324 free (4972 frags, 32044 blocks, 1.0% fragmentation)
GEOM_LABEL: Label for provider ad4s1e is ufsid/49a03275fee815d0.
GEOM_LABEL: Label ufsid/49a03273f07f84d9 removed.
/dev/ad4s1f: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad4s1f: clean, 8218598 free (63486 frags, 1019389 blocks, 0.5% fragmentation)
GEOM_LABEL: Label for provider ad4s1f is ufsid/49a03273f07f84d9.
GEOM_LABEL: Label ufsid/49a0326b0f417a7c removed.
/dev/ad4s3d: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad4s3d: clean, 11397928 free (197936 frags, 1399999 blocks, 0.2% fragmentation)
GEOM_LABEL: Label for provider ad4s3 is ufsid/49a0326b0f417a7c.
GEOM: ufsid/49a0326b0f417a7c: geometry does not match label (255h,63s != 16h,63s).
GEOM_LABEL: Label ufsid/49a0326ad263fa3b removed.
GEOM_LABEL: Label ufsid/49a0326a17952cd1 removed.
GEOM_LABEL: Label ufsid/49a0326b7fa5d802 removed.
GEOM_LABEL: Label ufsid/49a0326af6ccace1 removed.
GEOM_LABEL: Label ufsid/49a0326ab899464f removed.
GEOM_LABEL: Label ufsid/49a032737dfc2e90 removed.
GEOM_LABEL: Label ufsid/49a03275fee815d0 removed.
GEOM_LABEL: Label ufsid/49a03273f07f84d9 removed.
GEOM_LABEL: Label ufsid/49a0326b0f417a7c removed.
Starting Network: lo0 bge0.
rpc.umntall:
t4: RPCPROG_MNT: RPC: Unknown host
bge0: link UP
bge0: link state changed to UP
Removing stale Samba tdb files:
done
Starting fusefs.
link_elf_obj: symbol dev2unit undefined
linker_load_file: Unsupported file type
kldload:
can't load /usr/local/modules/fuse.ko
:
Exec format error
Configuring syscons:
keymap
font8x16
font8x14
font8x8
blanktime
.
Local package initialization:
pci0: driver added
found-> vendor=0x8086, dev=0x293e, revid=0x03
domain=0, bus=0, slot=27, func=0
class=04-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=22
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
pci0:0:27:0: reprobing on driver added
found-> vendor=0x8086, dev=0x2930, revid=0x03
domain=0, bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=19
pci0:0:31:3: reprobing on driver added
pci2: driver added
found-> vendor=0x197b, dev=0x2382, revid=0x00
domain=0, bus=2, slot=0, func=0
class=08-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=16
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
pci0:2:0:0: reprobing on driver added
found-> vendor=0x197b, dev=0x2381, revid=0x00
domain=0, bus=2, slot=0, func=2
class=08-05-01, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=16
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
pci0:2:0:2: reprobing on driver added
sdhci0: <JMicron JMB38X SD> mem 0xf4500400-0xf45004ff irq 16 at device 0.2 on pci2
sdhci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xf4500400
sdhci0-slot0: 50MHz 4bits 3.3V DMA
sdhci0-slot0: ============== REGISTER DUMP ==============
sdhci0-slot0: Sys addr: 0x00000000 | Version: 0x0000ac01
sdhci0-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000
sdhci0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci0-slot0: Present: 0x00080000 | Host ctl: 0x00000000
sdhci0-slot0: Power: 0x00000000 | Blk gap: 0x00000000
sdhci0-slot0: Wake-up: 0x00000000 | Clock: 0x00000000
sdhci0-slot0: Timeout: 0x00000000 | Int stat: 0x00000000
sdhci0-slot0: Int enab: 0x01ff00fb | Sig enab: 0x01ff00fb
sdhci0-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000
sdhci0-slot0: Caps: 0x014832b2 | Max curr: 0x00000000
sdhci0-slot0: ===========================================
sdhci0: 1 slot(s) allocated
sdhci0: [MPSAFE]
sdhci0: [ITHREAD]
found-> vendor=0x197b, dev=0x2383, revid=0x00
domain=0, bus=2, slot=0, func=3
class=08-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=16
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
pci0:2:0:3: reprobing on driver added
pci3: driver added
pci4: driver added
found-> vendor=0x8086, dev=0x4237, revid=0x00
domain=0, bus=4, slot=0, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=18
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
pci0:4:0:0: reprobing on driver added
pci5: driver added
pci7: driver added
pci8: driver added
GNUstep
snapshots
.
battery0: battery initialization failed, giving up
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_buffersize=16384 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
pci0: driver added
found-> vendor=0x8086, dev=0x293e, revid=0x03
domain=0, bus=0, slot=27, func=0
class=04-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=22
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
pci0:0:27:0: reprobing on driver added
hdac0: <Intel 82801I High Definition Audio Controller> mem 0xf4a00000-0xf4a03fff irq 22 at device 27.0 on pci0
hdac0: HDA Driver Revision: 20090329_0131
hdac0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xf4a00000
hdac0: attempting to allocate 1 MSI vectors (1 supported)
hdac0: using IRQ 257 for MSI
msi: Assigning MSI IRQ 257 to local APIC 0 vector 48
hdac0: [MPSAFE]
hdac0: [ITHREAD]
hdac0: Probing codec #0...
hdac0: HDA Codec #0: Intel G45 HDMI
hdac0: HDA Codec ID: 0x80862802
hdac0: Vendor: 0x8086
hdac0: Device: 0x2802
hdac0: Revision: 0x00
hdac0: Stepping: 0x00
hdac0: PCI Subvendor: 0x3a0d17aa
hdac0: Found audio FG nid=1 startnode=2 endnode=4 total=2
hdac0: Probing codec #2...
hdac0: HDA Codec #2: Conexant CX20561 (Hermosa)
hdac0: HDA Codec ID: 0x14f15051
hdac0: Vendor: 0x14f1
hdac0: Device: 0x5051
hdac0: Revision: 0x00
hdac0: Stepping: 0x00
hdac0: PCI Subvendor: 0x3a0d17aa
hdac0: Found audio FG nid=1 startnode=16 endnode=31 total=15
hdac0: Found modem FG nid=2 startnode=112 endnode=116 total=4
hdac0:
hdac0: Processing audio FG cad=0 nid=1...
hdac0: GPIO: 0x00000000 NumGPIO=0 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=0
hdac0: nid 3 0x18560010 as 1 seq 0 Digital-out Jack jack 6 loc 24 color Unknown misc 0
hdac0: Patched pins configuration:
hdac0: nid 3 0x18560010 as 1 seq 0 Digital-out Jack jack 6 loc 24 color Unknown misc 0
hdac0: 1 associations found:
hdac0: Association 0 (1) out:
hdac0: Pin nid=3 seq=0
hdac0: Tracing association 0 (1)
hdac0: Pin 3 traced to DAC 2
hdac0: Association 0 (1) trace succeeded
hdac0: Tracing input monitor
hdac0: Tracing beeper
hdac0: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref
hdac0:
hdac0: +-------------------+
hdac0: | DUMPING HDA NODES |
hdac0: +-------------------+
hdac0:
hdac0: Default Parameter
hdac0: -----------------
hdac0: IN amp: 0x00000000
hdac0: OUT amp: 0x00000000
hdac0:
hdac0: nid: 2
hdac0: Name: audio output
hdac0: Widget cap: 0x00006211
hdac0: DIGITAL STEREO
hdac0: Association: 0 (0x00000001)
hdac0: OSS: pcm (pcm)
hdac0: Stream cap: 0x00000005
hdac0: AC3 PCM
hdac0: PCM cap: 0x001e07f0
hdac0: 16 20 24 32 bits, 32 44 48 88 96 176 192 KHz
hdac0:
hdac0: nid: 3
hdac0: Name: pin: Digital-out (Jack)
hdac0: Widget cap: 0x0040739d
hdac0: DIGITAL UNSOL STEREO
hdac0: Association: 0 (0x00000001)
hdac0: Pin cap: 0x00000094
hdac0: PDC OUT
hdac0: Pin config: 0x18560010
hdac0: Pin control: 0x00000040 OUT
hdac0: Output amp: 0x80000000
hdac0: mute=1 step=0 size=0 offset=0
hdac0: connections: 1
hdac0: |
hdac0: + <- nid=2 [audio output]
hdac0:
hdac0: Processing audio FG cad=2 nid=1...
hdac0: GPIO: 0x40000004 NumGPIO=4 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=1
hdac0: nid 22 0x01214040 as 4 seq 0 Headphones Jack jack 1 loc 1 color Green misc 0
hdac0: nid 23 0x400001f0 as 15 seq 0 Line-out None jack 0 loc 0 color Unknown misc 1
hdac0: nid 24 0x01a19030 as 3 seq 0 Mic Jack jack 1 loc 1 color Pink misc 0
hdac0: nid 25 0x400001f0 as 15 seq 0 Line-out None jack 0 loc 0 color Unknown misc 1
hdac0: nid 26 0x92170110 as 1 seq 0 Speaker Fixed jack 7 loc 18 color Unknown misc 1
hdac0: nid 27 0x400001f0 as 15 seq 0 Line-out None jack 0 loc 0 color Unknown misc 1
hdac0: nid 28 0x400001f0 as 15 seq 0 Line-out None jack 0 loc 0 color Unknown misc 1
hdac0: nid 29 0x97a70120 as 2 seq 0 Mic Fixed jack 7 loc 23 color Unknown misc 1
hdac0: Patched pins configuration:
hdac0: nid 22 0x01214040 as 4 seq 0 Headphones Jack jack 1 loc 1 color Green misc 0
hdac0: nid 23 0x400001f0 as 15 seq 0 Line-out None jack 0 loc 0 color Unknown misc 1 [DISABLED]
hdac0: nid 24 0x01a19030 as 3 seq 0 Mic Jack jack 1 loc 1 color Pink misc 0
hdac0: nid 25 0x400001f0 as 15 seq 0 Line-out None jack 0 loc 0 color Unknown misc 1 [DISABLED]
hdac0: nid 26 0x92170110 as 1 seq 0 Speaker Fixed jack 7 loc 18 color Unknown misc 1
hdac0: nid 27 0x400001f0 as 15 seq 0 Line-out None jack 0 loc 0 color Unknown misc 1 [DISABLED]
hdac0: nid 28 0x400001f0 as 15 seq 0 Line-out None jack 0 loc 0 color Unknown misc 1 [DISABLED]
hdac0: nid 29 0x97a70120 as 2 seq 0 Mic Fixed jack 7 loc 23 color Unknown misc 1
hdac0: 4 associations found:
hdac0: Association 0 (1) out:
hdac0: Pin nid=26 seq=0
hdac0: Association 1 (2) in:
hdac0: Pin nid=29 seq=0
hdac0: Association 2 (3) in:
hdac0: Pin nid=24 seq=0
hdac0: Association 3 (4) out:
hdac0: Pin nid=22 seq=0
hdac0: Tracing association 0 (1)
hdac0: Pin 26 traced to DAC 16
hdac0: Association 0 (1) trace succeeded
hdac0: Tracing association 1 (2)
hdac0: Pin 29 traced to ADC 20
hdac0: Association 1 (2) trace succeeded
hdac0: Tracing association 2 (3)
hdac0: Pin 24 traced to ADC 21
hdac0: Association 2 (3) trace succeeded
hdac0: Tracing association 3 (4)
hdac0: Pin 22 traced to DAC 17
hdac0: Association 3 (4) trace succeeded
hdac0: Tracing input monitor
hdac0: Tracing beeper
hdac0: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref
hdac0:
hdac0: +-------------------+
hdac0: | DUMPING HDA NODES |
hdac0: +-------------------+
hdac0:
hdac0: Default Parameter
hdac0: -----------------
hdac0: Stream cap: 0x00000001
hdac0: PCM
hdac0: PCM cap: 0x000e0160
hdac0: 16 20 24 bits, 44 48 96 KHz
hdac0: IN amp: 0x00000000
hdac0: OUT amp: 0x00000000
hdac0:
hdac0: nid: 16
hdac0: Name: audio output
hdac0: Widget cap: 0x00000c1d
hdac0: LRSWAP PWR STEREO
hdac0: Association: 0 (0x00000001)
hdac0: OSS: pcm (pcm)
hdac0: Stream cap: 0x00000001
hdac0: PCM
hdac0: PCM cap: 0x000e0560
hdac0: 16 20 24 bits, 44 48 96 192 KHz
hdac0: Output amp: 0x00034a4a
hdac0: mute=0 step=74 size=3 offset=74
hdac0:
hdac0: nid: 17
hdac0: Name: audio output
hdac0: Widget cap: 0x00000c1d
hdac0: LRSWAP PWR STEREO
hdac0: Association: 3 (0x00000001)
hdac0: OSS: pcm (pcm)
hdac0: Stream cap: 0x00000001
hdac0: PCM
hdac0: PCM cap: 0x000e0560
hdac0: 16 20 24 bits, 44 48 96 192 KHz
hdac0: Output amp: 0x00034a4a
hdac0: mute=0 step=74 size=3 offset=74
hdac0:
hdac0: nid: 18 [DISABLED]
hdac0: Name: audio output
hdac0: Widget cap: 0x00000211
hdac0: DIGITAL STEREO
hdac0: Stream cap: 0x00000005
hdac0: AC3 PCM
hdac0: PCM cap: 0x000e0160
hdac0: 16 20 24 bits, 44 48 96 KHz
hdac0:
hdac0: nid: 19
hdac0: Name: beep widget
hdac0: Widget cap: 0x0070000c
hdac0: Association: -2 (0x00000000)
hdac0: OSS: speaker (speaker)
hdac0: Output amp: 0x00170303
hdac0: mute=0 step=3 size=23 offset=3
hdac0:
hdac0: nid: 20
hdac0: Name: audio input
hdac0: Widget cap: 0x00100d1b
hdac0: LRSWAP PWR STEREO
hdac0: Association: 1 (0x00000001)
hdac0: Stream cap: 0x00000001
hdac0: PCM
hdac0: PCM cap: 0x000e0160
hdac0: 16 20 24 bits, 44 48 96 KHz
hdac0: Input amp: 0x0003504a
hdac0: mute=0 step=80 size=3 offset=74
hdac0: connections: 2
hdac0: |
hdac0: + <- nid=29 [pin: Mic (Fixed)] (selected)
hdac0: + [DISABLED] <- nid=23 [pin: Line-out (None)] [DISABLED]
hdac0:
hdac0: nid: 21
hdac0: Name: audio input
hdac0: Widget cap: 0x00100d1b
hdac0: LRSWAP PWR STEREO
hdac0: Association: 2 (0x00000001)
hdac0: Stream cap: 0x00000001
hdac0: PCM
hdac0: PCM cap: 0x000e0160
hdac0: 16 20 24 bits, 44 48 96 KHz
hdac0: Input amp: 0x0003504a
hdac0: mute=0 step=80 size=3 offset=74
hdac0: connections: 1
hdac0: |
hdac0: + <- nid=24 [pin: Mic (Pink Jack)]
hdac0:
hdac0: nid: 22
hdac0: Name: pin: Headphones (Green Jack)
hdac0: Widget cap: 0x00400581
hdac0: PWR UNSOL STEREO
hdac0: Association: 3 (0x00000001)
hdac0: Pin cap: 0x0000001c
hdac0: PDC HP OUT
hdac0: Pin config: 0x01214040
hdac0: Pin control: 0x000000c0 HP OUT
hdac0: connections: 2
hdac0: |
hdac0: + [DISABLED] <- nid=16 [audio output]
hdac0: + <- nid=17 [audio output] (selected)
hdac0:
hdac0: nid: 23 [DISABLED]
hdac0: Name: pin: Line-out (None)
hdac0: Widget cap: 0x0040048b
hdac0: PWR UNSOL STEREO
hdac0: Pin cap: 0x00001224
hdac0: PDC IN VREF[ 50 80 ]
hdac0: Pin config: 0x400001f0
hdac0: Pin control: 0x00000000
hdac0: Input amp: 0x00270400
hdac0: mute=0 step=4 size=39 offset=0
hdac0:
hdac0: nid: 24
hdac0: Name: pin: Mic (Pink Jack)
hdac0: Widget cap: 0x0040048b
hdac0: PWR UNSOL STEREO
hdac0: Association: 2 (0x00000001)
hdac0: OSS: mic (mic)
hdac0: Pin cap: 0x00001224
hdac0: PDC IN VREF[ 50 80 ]
hdac0: Pin config: 0x01a19030
hdac0: Pin control: 0x00000024 IN VREFs
hdac0: Input amp: 0x00270400
hdac0: mute=0 step=4 size=39 offset=0
hdac0:
hdac0: nid: 25 [DISABLED]
hdac0: Name: pin: Line-out (None)
hdac0: Widget cap: 0x00400581
hdac0: PWR UNSOL STEREO
hdac0: Pin cap: 0x00000014
hdac0: PDC OUT
hdac0: Pin config: 0x400001f0
hdac0: Pin control: 0x00000000
hdac0: connections: 2
hdac0: |
hdac0: + <- nid=16 [audio output] (selected)
hdac0: + <- nid=17 [audio output]
hdac0:
hdac0: nid: 26
hdac0: Name: pin: Speaker (Fixed)
hdac0: Widget cap: 0x00400501
hdac0: PWR STEREO
hdac0: Association: 0 (0x00000001)
hdac0: Pin cap: 0x00010010
hdac0: OUT EAPD
hdac0: Pin config: 0x92170110
hdac0: Pin control: 0x00000040 OUT
hdac0: EAPD: 0x00000002
hdac0: connections: 2
hdac0: |
hdac0: + <- nid=16 [audio output] (selected)
hdac0: + [DISABLED] <- nid=17 [audio output]
hdac0:
hdac0: nid: 27 [DISABLED]
hdac0: Name: pin: Line-out (None)
hdac0: Widget cap: 0x00400500
hdac0: PWR
hdac0: Pin cap: 0x00010010
hdac0: OUT EAPD
hdac0: Pin config: 0x400001f0
hdac0: Pin control: 0x00000000
hdac0: EAPD: 0x00000002
hdac0: connections: 2
hdac0: |
hdac0: + <- nid=16 [audio output] (selected)
hdac0: + <- nid=17 [audio output]
hdac0:
hdac0: nid: 28 [DISABLED]
hdac0: Name: pin: Line-out (None)
hdac0: Widget cap: 0x00400701
hdac0: PWR DIGITAL STEREO
hdac0: Pin cap: 0x00000010
hdac0: OUT
hdac0: Pin config: 0x400001f0
hdac0: Pin control: 0x00000000
hdac0: connections: 1
hdac0: |
hdac0: + <- nid=18 [audio output] [DISABLED]
hdac0:
hdac0: nid: 29
hdac0: Name: pin: Mic (Fixed)
hdac0: Widget cap: 0x0040040b
hdac0: PWR STEREO
hdac0: Association: 1 (0x00000001)
hdac0: OSS: monitor (monitor)
hdac0: Pin cap: 0x00000020
hdac0: IN
hdac0: Pin config: 0x97a70120
hdac0: Pin control: 0x00000020 IN
hdac0: Input amp: 0x00270400
hdac0: mute=0 step=4 size=39 offset=0
hdac0:
hdac0: nid: 30 [DISABLED]
hdac0: Name: vendor widget
hdac0: Widget cap: 0x00f00000
hdac0:
hdac0: Processing modem FG cad=2 nid=2...
hdac0:
found-> vendor=0x8086, dev=0x2930, revid=0x03
domain=0, bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=19
pci0:0:31:3: reprobing on driver added
pci2: driver added
found-> vendor=0x197b, dev=0x2382, revid=0x00
domain=0, bus=2, slot=0, func=0
class=08-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=16
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
pci0:2:0:0: reprobing on driver added
found-> vendor=0x197b, dev=0x2383, revid=0x00
domain=0, bus=2, slot=0, func=3
class=08-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=16
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
pci0:2:0:3: reprobing on driver added
pci3: driver added
pci4: driver added
found-> vendor=0x8086, dev=0x4237, revid=0x00
domain=0, bus=4, slot=0, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=18
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
pci0:4:0:0: reprobing on driver added
pci5: driver added
pci7: driver added
pci8: driver added
pcm0: <HDA Intel G45 HDMI PCM #0 Digital> at cad 0 nid 1 on hdac0
pcm0: +--------------------------------------+
pcm0: | DUMPING PCM Playback/Record Channels |
pcm0: +--------------------------------------+
pcm0:
pcm0: Playback:
pcm0:
pcm0: Stream cap: 0x00000005
pcm0: AC3 PCM
pcm0: PCM cap: 0x001e07f0
pcm0: 16 20 24 32 bits, 32 44 48 88 96 176 192 KHz
pcm0: DAC: 2
pcm0:
pcm0: +-------------------------------+
pcm0: | DUMPING Playback/Record Paths |
pcm0: +-------------------------------+
pcm0:
pcm0: Playback:
pcm0:
pcm0: nid=3 [pin: Digital-out (Jack)]
pcm0: |
pcm0: + <- nid=2 [audio output] [src: pcm]
pcm0:
pcm0: +-------------------------+
pcm0: | DUMPING Volume Controls |
pcm0: +-------------------------+
pcm0:
pcm0: Master Volume (OSS: vol)
pcm0: |
pcm0: +- ctl 1 (nid 3 in ): mute
pcm0:
pcm0: PCM Volume (OSS: pcm)
pcm0: |
pcm0: +- ctl 1 (nid 3 in ): mute
pcm0:
pcm0: Mixer "vol":
pcm0: Mixer "pcm":
pcm0: clone manager: deadline=750ms flags=0x8000001e
pcm0: sndbuf_setmap ee30000, 4000; 0xfffffffeb8d08000 -> ee30000
pcm1: <HDA Conexant CX20561 (Hermosa) PCM #0 Analog> at cad 2 nid 1 on hdac0
pcm1: +--------------------------------------+
pcm1: | DUMPING PCM Playback/Record Channels |
pcm1: +--------------------------------------+
pcm1:
pcm1: Playback:
pcm1:
pcm1: Stream cap: 0x00000001
pcm1: PCM
pcm1: PCM cap: 0x000e0560
pcm1: 16 20 24 bits, 44 48 96 192 KHz
pcm1: DAC: 16
pcm1:
pcm1: Record:
pcm1:
pcm1: Stream cap: 0x00000001
pcm1: PCM
pcm1: PCM cap: 0x000e0160
pcm1: 16 20 24 bits, 44 48 96 KHz
pcm1: ADC: 20
pcm1:
pcm1: +-------------------------------+
pcm1: | DUMPING Playback/Record Paths |
pcm1: +-------------------------------+
pcm1:
pcm1: Playback:
pcm1:
pcm1: nid=26 [pin: Speaker (Fixed)]
pcm1: |
pcm1: + <- nid=16 [audio output] [src: pcm]
pcm1:
pcm1: Record:
pcm1:
pcm1: nid=20 [audio input]
pcm1: |
pcm1: + <- nid=29 [pin: Mic (Fixed)] [src: monitor]
pcm1:
pcm1: +-------------------------+
pcm1: | DUMPING Volume Controls |
pcm1: +-------------------------+
pcm1:
pcm1: Master Volume (OSS: vol)
pcm1: |
pcm1: +- ctl 1 (nid 16 out): -74/0dB (75 steps)
pcm1:
pcm1: PCM Volume (OSS: pcm)
pcm1: |
pcm1: +- ctl 1 (nid 16 out): -74/0dB (75 steps)
pcm1:
pcm1: Microphone2 Volume (OSS: monitor)
pcm1: |
pcm1: +- ctl 8 (nid 29 out): 0/40dB (5 steps)
pcm1:
pcm1: Speaker/Beep Volume (OSS: speaker)
pcm1: |
pcm1: +- ctl 3 (nid 19 out): -18/0dB (4 steps)
pcm1:
pcm1: Recording Level (OSS: rec)
pcm1: |
pcm1: +- ctl 4 (nid 20 in 0): -74/6dB (81 steps)
pcm1:
pcm1: Mixer "vol":
pcm1: Mixer "pcm":
pcm1: Mixer "speaker":
pcm1: Mixer "rec":
pcm1: Mixer "ogain":
pcm1: Mixer "monitor":
pcm1: clone manager: deadline=750ms flags=0x8000001e
pcm1: sndbuf_setmap 4c50000, 4000; 0xfffffffeb8d18000 -> 4c50000
pcm1: sndbuf_setmap 4c60000, 4000; 0xfffffffeb8d28000 -> 4c60000
pcm2: <HDA Conexant CX20561 (Hermosa) PCM #1 Analog> at cad 2 nid 1 on hdac0
pcm2: +--------------------------------------+
pcm2: | DUMPING PCM Playback/Record Channels |
pcm2: +--------------------------------------+
pcm2:
pcm2: Playback:
pcm2:
pcm2: Stream cap: 0x00000001
pcm2: PCM
pcm2: PCM cap: 0x000e0560
pcm2: 16 20 24 bits, 44 48 96 192 KHz
pcm2: DAC: 17
pcm2:
pcm2: Record:
pcm2:
pcm2: Stream cap: 0x00000001
pcm2: PCM
pcm2: PCM cap: 0x000e0160
pcm2: 16 20 24 bits, 44 48 96 KHz
pcm2: ADC: 21
pcm2:
pcm2: +-------------------------------+
pcm2: | DUMPING Playback/Record Paths |
pcm2: +-------------------------------+
pcm2:
pcm2: Playback:
pcm2:
pcm2: nid=22 [pin: Headphones (Green Jack)]
pcm2: |
pcm2: + <- nid=17 [audio output] [src: pcm]
pcm2:
pcm2: Record:
pcm2:
pcm2: nid=21 [audio input]
pcm2: |
pcm2: + <- nid=24 [pin: Mic (Pink Jack)] [src: mic]
pcm2:
pcm2: +-------------------------+
pcm2: | DUMPING Volume Controls |
pcm2: +-------------------------+
pcm2:
pcm2: Master Volume (OSS: vol)
pcm2: |
pcm2: +- ctl 2 (nid 17 out): -74/0dB (75 steps)
pcm2:
pcm2: PCM Volume (OSS: pcm)
pcm2: |
pcm2: +- ctl 2 (nid 17 out): -74/0dB (75 steps)
pcm2:
pcm2: Microphone Volume (OSS: mic)
pcm2: |
pcm2: +- ctl 7 (nid 24 out): 0/40dB (5 steps)
pcm2:
pcm2: Recording Level (OSS: rec)
pcm2: |
pcm2: +- ctl 5 (nid 21 in 0): -74/6dB (81 steps)
pcm2:
pcm2: Mixer "vol":
pcm2: Mixer "pcm":
pcm2: Mixer "mic":
pcm2: Mixer "rec":
pcm2: clone manager: deadline=750ms flags=0x8000001e
pcm2: sndbuf_setmap 4c70000, 4000; 0xfffffffeb8d38000 -> 4c70000
pcm2: sndbuf_setmap ee40000, 4000; 0xfffffffeb8d48000 -> ee40000
More information about the freebsd-multimedia
mailing list