Dell Inspiron 1525 Audio

[Leonardo M. Ramé]

Solved with "sysctl hw.snd.default_unit=1", the default unit was 0.

 Leonardo M. Ramé
http://leonardorame.blogspot.com



----- Forwarded Message ----
From: Leonardo M. Ramé <martinrame at yahoo.com>
To: freebsd-multimedia at freebsd.org
Sent: Saturday, June 20, 2009 6:46:45 PM
Subject: Dell Inspiron 1525 Audio


Hi, I'm trying to setup the audio card in my Dell Inspiron 1525, but it seems to be an imposible task.

These are the results of some commands I used to check my multimedia configuration:

uname -a:
FreeBSD inspiron.local 7.2-RELEASE FreeBSD 7.2-RELEASE #0: Fri May  1 08:49:13 UTC 2009    root at walker.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC  i386

dmesg|grep Codec:
hdac0: HDA Codec #0: Conexant (Unknown)
hdac0: HDA Codec #1: Silicon Image SiI1392 HDMI
hdac0: HDA Codec #2: Sigmatel STAC9228X

pciconf -lv | grep -B 3 multimedia:
hdac0 at pci0:0:27:0:    class=0x040300 card=0x022f1028 chip=0x284b8086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801H &SUBSYS_81EC1043&REV_02\3&11583659&0&D8'
    class      = multimedia

sysctl hw.snd dev.pcm:
hw.snd.latency_profile: 1
hw.snd.latency: 5
hw.snd.report_soft_formats: 1
hw.snd.compat_linux_mmap: 0
hw.snd.feeder_buffersize: 16384
hw.snd.feeder_rate_round: 25
hw.snd.feeder_rate_max: 2016000
hw.snd.feeder_rate_min: 1
hw.snd.verbose: 1
hw.snd.maxautovchans: 16
hw.snd.default_unit: 0
hw.snd.version: 2007061600/i386
hw.snd.default_auto: 0
dev.pcm.0.%desc: HDA Silicon Image SiI1392 HDMI PCM #0 Digital
dev.pcm.0.%driver: pcm
dev.pcm.0.%parent: hdac0
dev.pcm.0.play.vchans: 1
dev.pcm.0.play.vchanrate: 48000
dev.pcm.0.play.vchanformat: s16le
dev.pcm.0.buffersize: 16384
dev.pcm.1.%desc: HDA Sigmatel STAC9228X PCM #0 Analog
dev.pcm.1.%driver: pcm
dev.pcm.1.%parent: hdac0
dev.pcm.1.play.vchans: 1
dev.pcm.1.play.vchanrate: 48000
dev.pcm.1.play.vchanformat: s16le
dev.pcm.1.rec.vchans: 1
dev.pcm.1.rec.vchanrate: 48000
dev.pcm.1.rec.vchanformat: s16le
dev.pcm.1.buffersize: 16384
dev.pcm.2.%desc: HDA Sigmatel STAC9228X PCM #1 Analog
dev.pcm.2.%driver: pcm
dev.pcm.2.%parent: hdac0
dev.pcm.2.play.vchans: 1
dev.pcm.2.play.vchanrate: 48000
dev.pcm.2.play.vchanformat: s16le
dev.pcm.2.buffersize: 16384
dev.pcm.3.%desc: HDA Sigmatel STAC9228X PCM #2 Digital
dev.pcm.3.%driver: pcm
dev.pcm.3.%parent: hdac0
dev.pcm.3.play.vchans: 1
dev.pcm.3.play.vchanrate: 48000
dev.pcm.3.play.vchanformat: s16le
dev.pcm.3.buffersize: 16384

mixer:
Mixer vol      is currently set to  75:75
Mixer pcm      is currently set to  82:82

When I try to play a .wav with xmms it "plays" the file, but no sound is heard. The same results when I do a "cat file > /dev/dsp".

Any hint?


Leonardo M. Ramé
http://leonardorame.blogspot.com




_______________________________________________
freebsd-multimedia at freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia
To unsubscribe, send any mail to "freebsd-multimedia-unsubscribe at freebsd.org"