FreeBSD 7.2, snd_hda and Asus P5KPL-AM SE - sound loudness is too low

Eugeny N Dzhurinsky bofh at redwerk.com
Sat Jun 13 13:25:05 UTC 2009


Hello, everybody!

I have the motherboard Asus P5KPL-AM SE and FreeBSD-7.2 release.

The sound card is recognized as:

pcm0: <HDA Realtek ALC662 PCM #0 Analog> at cad 0 nid 1 on hdac0
pcm1: <HDA Realtek ALC662 PCM #1 Analog> at cad 0 nid 1 on hdac0

The mixer options are:

Mixer vol      is currently set to  90:90
Mixer pcm      is currently set to  90:90
Mixer line     is currently set to  90:90
Mixer mic      is currently set to  90:90
Mixer mix      is currently set to  90:90
Mixer rec      is currently set to  90:90
Mixer ogain    is currently set to  90:90
Recording source: mic

However the sound loudness is too low. I tried to plug the headphones to the
rear jack as well as to the front jack - but the sound is too low. Then I
unplugged the front connectors from the motherboard and plugged the headphones
to the rear jack - and still the sound loudness is low.

To check the loudness level I tried to play the same MP3 file with
- musicpd
- mpg123

The complete list of the modules is:

Id Refs Address    Size     Name
 1   52 0xc0400000 4fce10   kernel
 2    1 0xc08fd000 627c     geom_label.ko
 3    1 0xc0904000 9f50     if_re.ko
 4    1 0xc090e000 1ad88    snd_hda.ko
 5    2 0xc0929000 4a59c    sound.ko
 6    1 0xc0974000 7d88     ukbd.ko
 7    1 0xc097c000 41d8     ums.ko
 8    2 0xc0981000 1796c    agp.ko
 9    1 0xc0999000 2354     accf_http.ko
10    1 0xc099c000 7f7c     ng_ubt.ko
11    2 0xc09a4000 d9f8     netgraph.ko
12    1 0xc09b2000 3900     u3g.ko
13    1 0xc09b6000 1924     wlan_scan_ap.ko
14    1 0xc09b8000 5200     wlan_scan_sta.ko
15    1 0xc09be000 1db4     msdosfs_iconv.ko
16    2 0xc09c0000 4e80     libiconv.ko
17    1 0xc09c5000 a204     i915.ko
18    2 0xc09d0000 1632c    drm.ko
19    1 0xc09e7000 6a44c    acpi.ko
20    1 0xc851d000 4000     fdescfs.ko
21    1 0xc86c7000 3000     pflog.ko
22    1 0xc86d2000 35000    pf.ko
23    1 0xc8969000 22000    linux.ko
24    1 0xc8b95000 2000     blank_saver.ko

The complete output of dmesg is listed below.

Could you please let me know what might be wrong?

Thank you in advance!


===============================dmesg output cut==============================================

Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-RELEASE #21: Sat May  9 02:05:59 EEST 2009
    root at jdevelop.priv:/usr/obj/usr/src/sys/BOFH
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Duo CPU     E7300  @ 2.66GHz (2666.69-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x10676  Stepping = 6
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x8e39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1>
  AMD Features=0x20100000<NX,LM>
  AMD Features2=0x1<LAHF>
  Cores per package: 2
real memory  = 3748200448 (3574 MB)
avail memory = 3668439040 (3498 MB)
ACPI APIC Table: <A_M_I_ OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
wlan: mac acl policy registered
acpi0: <A_M_I_ OEMRSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, df600000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xdc00-0xdc07 mem 0xfe980000-0xfe9fffff,0xe0000000-0xefffffff,0xfe800000-0xfe8fffff irq 16 at device 2.0 on pci0
agp0: <Intel G33 SVGA controller> on vgapci0
agp0: detected 7164k stolen memory
agp0: aperture size is 256M
drm0: <Intel G33> on vgapci0
vgapci0: child drm0 requested pci_enable_busmaster
info: [drm] AGP at 0xe0000000 256MB
info: [drm] Initialized i915 1.6.0 20080730
hdac0: <Intel 82801G High Definition Audio Controller> mem 0xfe978000-0xfe97bfff irq 16 at device 27.0 on pci0
hdac0: HDA Driver Revision: 20090329_0131
hdac0: [ITHREAD]
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci1: <ACPI PCI bus> on pcib2
re0: <RealTek 8101E/8102E/8102EL PCIe 10/100baseTX> port 0xe800-0xe8ff mem 0xfdfff000-0xfdffffff,0xfdfe0000-0xfdfeffff irq 17 at device 0.0 on pci1
re0: Using 1 MSI messages
re0: Chip rev. 0x24800000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rlphy0: <RTL8201L 10/100 media interface> PHY 1 on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
re0: Ethernet address: 00:24:8c:cb:71:21
re0: [FILTER]
uhci0: <UHCI (generic) USB controller> port 0xd400-0xd41f irq 23 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xd480-0xd49f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xd800-0xd81f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0xd880-0xd89f irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfe977c00-0xfe977fff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib3
ral0: <Ralink Technology RT2561> mem 0xfebf8000-0xfebfffff irq 20 at device 0.0 on pci3
ral0: MAC/BBP RT2561C, RF RT2527
ral0: Ethernet address: 00:1b:11:01:6b:f6
ral0: [ITHREAD]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
atapci1: <Intel ICH7 SATA300 controller> port 0xd080-0xd087,0xd000-0xd003,0xcc00-0xcc07,0xc880-0xc883,0xc800-0xc80f irq 19 at device 31.2 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
speaker0: <PC speaker> port 0x61 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
cpu0: <ACPI CPU> on acpi0
ACPI Warning (tbutils-0243): Incorrect checksum in table [OEMB] -  14, should be 13 [20070320]
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: parallel port not found.
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
ums0: <Logitech USB-PS/2 Optical Mouse, class 0/0, rev 2.00/27.20, addr 2> on uhub0
ums0: 8 buttons and Z dir.
ucom0: <Huawei Technologies Huawei Mobile, class 0/0, rev 1.10/0.00, addr 2> on uhub1
ucom0: configured 3 serial ports (U0.%d)
umass0: <Huawei Technologies Huawei Mobile, class 0/0, rev 1.10/0.00, addr 2> on uhub1
Timecounters tick every 1.000 msec
IP Filter: v4.1.28 initialized.  Default = pass all, Logging = enabled
ipfw2 (+ipv6) initialized, divert enabled, nat loadable, rule-based forwarding enabled, default to accept, logging limited to 100 packets/entry by default
ad0: 38166MB <Seagate ST340014A 3.06> at ata0-master UDMA100
ad4: 305245MB <Seagate ST3320620AS 3.AAK> at ata2-master SATA150
hdac0: HDA Codec #0: Realtek ALC662
pcm0: <HDA Realtek ALC662 PCM #0 Analog> at cad 0 nid 1 on hdac0
pcm1: <HDA Realtek ALC662 PCM #1 Analog> at cad 0 nid 1 on hdac0
GEOM_LABEL: Label for provider ad0s1 is label/media.
GEOM_LABEL: Label for provider ad0s1 is ufsid/46b1b2a226a39682.
GEOM_LABEL: Label for provider ad0s1 is ufs/storage.
GEOM_LABEL: Label for provider ad4s1a is ufsid/46618c288189827b.
GEOM_LABEL: Label for provider ad4s1a is ufs/root.
GEOM_LABEL: Label for provider ad4s1b is label/swap.
GEOM_LABEL: Label for provider ad4s1d is ufsid/46618c34e2eb64fb.
GEOM_LABEL: Label for provider ad4s1d is ufs/var.
GEOM_LABEL: Label for provider ad4s1e is ufsid/46618c29973b3a0d.
GEOM_LABEL: Label for provider ad4s1e is ufs/tmp.
GEOM_LABEL: Label for provider ad4s1f is ufsid/46618c290a2631f0.
GEOM_LABEL: Label for provider ad4s1f is ufs/usr.
SMP: AP CPU #1 Launched!
cd0 at umass-sim0 bus 0 target 0 lun 0
cd0: <HUAWEI Mass Storage 2.31> Removable CD-ROM SCSI-2 device 
cd0: 1.000MB/s transfers
cd0: cd present [16896 x 2048 byte records]
GEOM_LABEL: Label for provider cd0 is iso9660/MOBILE PARTNER.
Trying to mount root from ufs:/dev/ufs/root
GEOM_LABEL: Label ufsid/46618c288189827b removed.
GEOM_LABEL: Label ufsid/46618c34e2eb64fb removed.
GEOM_LABEL: Label ufsid/46618c29973b3a0d removed.
GEOM_LABEL: Label ufsid/46618c290a2631f0 removed.
GEOM_LABEL: Label ufsid/46b1b2a226a39682 removed.
GEOM_LABEL: Label label/media removed.
WARNING: /mnt/mp3 was not properly dismounted
GEOM_LABEL: Label for provider md0.bde is ufsid/47e587a538148c61.
GEOM_LABEL: Label ufsid/47e587a538148c61 removed.
drm0: [ITHREAD]

-- 
Eugene N Dzhurinsky
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-multimedia/attachments/20090613/cbfbe091/attachment.pgp


More information about the freebsd-multimedia mailing list