Not working sound on HP 2133

Tue Apr 21 16:13:08 UTC 2009

Roman Makogon пишет:
> It works with headphones, but there's no output in builtin speakers.
yes. headphones, works. speakers - not =(
verbose dmesg - in attached file
> 
> On Tue, Apr 21, 2009 at 5:41 AM, Ricardo Jesus
> <ricardo.meb.jesus at gmail.com> wrote:
>> Alexander Motin wrote:
>>> Alex Keda wrote:
>>>> hdac0 at pci0:128:1:0:     class=0x040300 card=0x3030103c chip=0x32881106
>>>> rev=0x10 hdr=0x00
>>>>   vendor     = 'VIA Technologies Inc'
>>>>   device     = '??? VIA VT8251/8237A High Definition Audio Controller -
>>>> HDA Codec Realtek ALC660'
>>>>   class      = multimedia
>>>>   subclass   = HDA
>>>>
>>>> all detected, but - no sound =((
>>> Without verbose messages it is impossible to say anything.
>>>
>> The snd_via8233 driver supports the VIA VT8237 and VIA VT8251 audio
>> chipstes.
>>
>> To load the driver as a module at boot time, place the following line in
>> /boot/loader.conf:
>>
>> snd_via8233_load="YES"
>>
>> Have a look at the drivers man page: man snd_via8233.
>> _______________________________________________
>> freebsd-multimedia at freebsd.org mailing list
>> http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia
>> To unsubscribe, send any mail to
>> "freebsd-multimedia-unsubscribe at freebsd.org"
>>
> _______________________________________________
> freebsd-multimedia at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia
> To unsubscribe, send any mail to "freebsd-multimedia-unsubscribe at freebsd.org"

-------------- next part --------------
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-CURRENT #0: Sun Mar 22 14:52:47 MSK 2009
lissyara at HP.lissyara.su:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Turion(tm) 64 X2 Mobile Technology TL-60 (1994.93-MHz K8-class CPU)
Origin = "AuthenticAMD"  Id = 0x60f82  Stepping = 2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x2001<SSE3,CX16>
AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch>
Cores per package: 2
usable memory = 1995608064 (1903 MB)
avail memory  = 1927221248 (1837 MB)
ACPI APIC Table: <HP     0944    >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID:  0
cpu1 (AP): APIC ID:  1
ACPI Error (tbfadt-0516): 32/64X address mismatch in "Pm2ControlBlock": [    8800] [       0    8100], using 64X [20070320]
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <HPQOEM SLIC-MPC> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
unknown: I/O range not supported
acpi0: reservation of 0, 8000000 (3) failed
acpi0: reservation of 100000, fff00000 (3) failed
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x11> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x4000-0x40ff mem 0xc0000000-0xc7ffffff,0xd0200000-0xd020ffff,0xd0300000-0xd03fffff irq 19 at device 5.0 on pci1
pcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci16: <ACPI PCI bus> on pcib2
bge0: <Broadcom BCM5906 A2, ASIC rev. 0xc002> mem 0xd0000000-0xd000ffff irq 16 at device 0.0 on pci16
miibus0: <MII bus> on bge0
brgphy0: <BCM5906 10/100baseTX PHY> PHY 1 on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bge0: Ethernet address: 00:1f:29:89:38:f3
bge0: [ITHREAD]
pcib3: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci32: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci48: <ACPI PCI bus> on pcib4
pci48: <network> at device 0.0 (no driver attached)
atapci0: <ATI IXP600 SATA300 controller> port 0x9000-0x9007,0x9008-0x900b,0x9010-0x9017,0x5018-0x501b,0x5020-0x502f mem 0xd0409000-0xd04093ff irq 16 at device 18.0 on pci0
atapci0: [ITHREAD]
atapci0: AHCI Version 01.10 controller with 4 ports PM not supported
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ohci0: <OHCI (generic) USB controller> mem 0xd0401000-0xd0401fff irq 23 at device 19.0 on pci0
ohci0: [ITHREAD]
usbus0: <OHCI (generic) USB controller> on ohci0
ohci1: <OHCI (generic) USB controller> mem 0xd0402000-0xd0402fff irq 17 at device 19.1 on pci0
ohci1: [ITHREAD]
usbus1: <OHCI (generic) USB controller> on ohci1
ohci2: <OHCI (generic) USB controller> mem 0xd0403000-0xd0403fff irq 17 at device 19.2 on pci0
ohci2: [ITHREAD]
usbus2: <OHCI (generic) USB controller> on ohci2
ohci3: <OHCI (generic) USB controller> mem 0xd0404000-0xd0404fff irq 17 at device 19.3 on pci0
ohci3: [ITHREAD]
usbus3: <OHCI (generic) USB controller> on ohci3
ohci4: <OHCI (generic) USB controller> mem 0xd0405000-0xd0405fff irq 17 at device 19.4 on pci0
ohci4: [ITHREAD]
usbus4: <OHCI (generic) USB controller> on ohci4
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xd0406000-0xd04060ff irq 23 at device 19.5 on pci0
ehci0: [ITHREAD]
usbus5: EHCI version 1.0
usbus5: <EHCI (generic) USB 2.0 controller> on ehci0
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci1: <ATI IXP600 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x5040-0x504f irq 16 at device 20.1 on pci0
ata0: <ATA channel 0> on atapci1
ata0: [ITHREAD]
hdac0: <ATI SB600 High Definition Audio Controller> irq 16 at device 20.2 on pci0
hdac0: HDA Driver Revision: 20090316_0130
hdac0: [ITHREAD]
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib5: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci2: <ACPI PCI bus> on pcib5
cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xd0100000-0xd0100fff irq 20 at device 4.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [FILTER]
battery0: <ACPI Control Method Battery> on acpi0
battery1: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x73 irq 8 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Synaptics Touchpad, device ID 3
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
powernow0: <PowerNow! K8> on cpu0
cpu1: <ACPI CPU> on acpi0
acpi_throttle1: <ACPI CPU Throttling> on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
powernow1: <PowerNow! K8> on cpu1
orm0: <ISA Option ROM> at iomem 0xd0000-0xd0fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 480Mbps High Speed USB v2.0
ugen0.1: <ATI> at usbus0
uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <ATI> at usbus1
uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <ATI> at usbus2
uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <ATI> at usbus3
uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <ATI> at usbus4
uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <ATI> at usbus5
uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
acd0: DVDR <HL-DT-ST DVDRAM GSA-T20L/NC08> at ata0-master PIO4
ad4: 152627MB <TOSHIBA MK1646GSX LB114C> at ata2-master SATA300
hdac0: HDA Codec #0: Analog Devices AD1981HD
hdac0: HDA Codec #1: Lucent/Agere Systems (Unknown)
pcm0: <HDA Analog Devices AD1981HD PCM #0 Analog> at cad 0 nid 1 on hdac0
SMP: AP CPU #1 Launched!
WARNING: WITNESS option enabled, expect reduced performance.
GEOM: ad4s1: geometry does not match label (255h,63s != 16h,63s).
Root mount waiting for: usbus5 usbus4 usbus3 usbus2 usbus1 usbus0
uhub0: 2 ports with 2 removable, self powered
Root mount waiting for: usbus5 usbus4 usbus3 usbus2 usbus1
uhub1: 2 ports with 2 removable, self powered
Root mount waiting for: usbus5 usbus4 usbus3 usbus2
uhub2: 2 ports with 2 removable, self powered
Root mount waiting for: usbus5 usbus4 usbus3
uhub3: 2 ports with 2 removable, self powered
Root mount waiting for: usbus5 usbus4
uhub4: 2 ports with 2 removable, self powered
Root mount waiting for: usbus5

acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x01
Root mount waiting for: usbus5
uhub5: 10 ports with 10 removable, self powered
(probe0:ata0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:ata0:0:0:0): CAM Status: SCSI Status Error
(probe0:ata0:0:0:0): SCSI Status: Check Condition
(probe0:ata0:0:0:0): NOT READY csi:0,0,bb,0 asc:3a,0
(probe0:ata0:0:0:0): Medium not present
(probe0:ata0:0:0:0): Unretryable error
cd0 at ata0 bus 0 target 0 lun 0
cd0: <HL-DT-ST DVDRAM GSA-T20L NC08> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Root mount waiting for: usbus5
Trying to mount root from ufs:/dev/ad4s1a
WARNING: / was not properly dismounted
ugen0.2: <Broadcom Corp> at usbus0
ubt0: <Broadcom Corp HP Integrated Module, class 224/1, rev 2.00/1.00, addr 2> on usbus0
ugen1.2: <Logitech> at usbus1
ums0: <Logitech Optical USB Mouse, class 0/0, rev 2.00/3.40, addr 2> on usbus1
ums0: 3 buttons and [XYZ] coordinates
WARNING: TMPFS is considered to be a highly experimental feature in FreeBSD.
WARNING: attempt to net_add_domain(netgraph) after domainfinalize()
lock order reversal:
1st 0xfffffffe66c86120 bufwait (bufwait) @ /usr/src/sys/kern/vfs_bio.c:2549
2nd 0xffffff0003cf5600 dirhash (dirhash) @ /usr/src/sys/ufs/ufs/ufs_dirhash.c:275
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2a
_witness_debugger() at _witness_debugger+0x2e
witness_checkorder() at witness_checkorder+0x81e
_sx_xlock() at _sx_xlock+0x55
ufsdirhash_acquire() at ufsdirhash_acquire+0x33
ufsdirhash_remove() at ufsdirhash_remove+0x16
ufs_dirremove() at ufs_dirremove+0x181
ufs_remove() at ufs_remove+0x92
VOP_REMOVE_APV() at VOP_REMOVE_APV+0x93
kern_unlinkat() at kern_unlinkat+0x249
syscall() at syscall+0x1bf
Xfast_syscall() at Xfast_syscall+0xab
--- syscall (10, FreeBSD ELF64, unlink), rip = 0x80071c22c, rsp = 0x7fffffffe418, rbp = 0x7fffffffef6e ---
lock order reversal:
1st 0xffffff00072a5448 ufs (ufs) @ /usr/src/sys/kern/vfs_mount.c:1050
2nd 0xffffff00074879d0 devfs (devfs) @ /usr/src/sys/kern/vfs_subr.c:2100
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2a
_witness_debugger() at _witness_debugger+0x2e
witness_checkorder() at witness_checkorder+0x81e
__lockmgr_args() at __lockmgr_args+0xc2a
vop_stdlock() at vop_stdlock+0x39
VOP_LOCK1_APV() at VOP_LOCK1_APV+0x9b
_vn_lock() at _vn_lock+0x47
vget() at vget+0x8b
devfs_allocv() at devfs_allocv+0x10c
devfs_root() at devfs_root+0x52
vfs_donmount() at vfs_donmount+0x1019
nmount() at nmount+0x5a
syscall() at syscall+0x1bf
Xfast_syscall() at Xfast_syscall+0xab
--- syscall (378, FreeBSD ELF64, nmount), rip = 0x8007a9dfc, rsp = 0x7fffffffdd28, rbp = 0x800a04048 ---


fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8

drm0: <ATI Radeon RS690 X1270 IGP> on vgapci0
info: [drm] MSI enabled 1 message(s)
vgapci0: child drm0 requested pci_enable_busmaster
info: [drm] Initialized radeon 1.29.0 20080528
info: [drm] Setting GART location based on new memory map
info: [drm] Loading RS690/RS740 Microcode
info: [drm] Num pipes: 1
info: [drm] writeback test failed
drm0: [ITHREAD]