with USB2 in Current where should I start to get the crystal eye camara in my laptop working?

[Hans Petter Selasky]

On Sunday 16 November 2008, eculp wrote:
> I'm running up to date (today's cvsup and build) and would like to try
> and get the crystal eye camara in my acer aspire laptop working.
>
> Information:
>
> # uname -a
> FreeBSD ed.local.net.mx 8.0-CURRENT FreeBSD 8.0-CURRENT #79: Sat Nov
> 15 06:42:19 CST 2008
> root at ed.local.net.mx:/usr/obj/usr/src/sys/ENCONTACTO  i386
>
> On a verbose boot the only reference that I find in the dmesg is:
>
> ugen0: <SuYin Acer CrystalEye webcam, class 239/2, rev 2.00/1.00, addr
> 2> on uhub1
>
> # usbdevs -v -l
> Controller /dev/usb0:
> addr 1: full speed, self powered, config 1, OHCI root hub(0x0000),
> nVidia(0x0000), rev 1.00
>    uhub0
>   port 1 powered
>   port 2 powered
>   port 3 powered
>   port 4 powered
>   port 5 powered
> Controller /dev/usb1:
> addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
> nVidia(0x0000), rev 1.00
>    uhub1
>   port 1 powered
>   port 2 powered
>   port 3 addr 2: high speed, power 500 mA, config 1, Acer CrystalEye
> webcam(0xa101), SuYin(0x064e), rev 1.00
>     ugen0
>   port 4 powered
>   port 5 powered
> Controller /dev/usb2:
> addr 1: full speed, self powered, config 1, OHCI root hub(0x0000),
> nVidia(0x0000), rev 1.00
>    uhub2
>   port 1 powered
>   port 2 powered
>   port 3 powered
>   port 4 powered
>   port 5 powered
> Controller /dev/usb3:
> addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
> nVidia(0x0000), rev 1.00
>    uhub3
>   port 1 powered
>   port 2 powered
>   port 3 powered
>   port 4 powered
>   port 5 powered
>
> I've installed the following kernel modules and tried each but without
> any luck.
>
> pwc_load="YES"
> gspca_load="YES"
> ov511_load="YES"
>
> I think basically all Acer laptops have this camera now, hopefully
> someone has some suggestions.
>

Hi,

There is a program called /usr/ports/sysutils/udesc_dump which you can use to 
dump USB descriptors. Try that on your device and send us the output.

--HPS