Intel 82801I hda, STAC9271D codec: problem(s)

[Andriy Gapon]

on 06/11/2008 14:23 Andriy Gapon said the following:
> on 05/11/2008 17:21 Alexander Motin said the following:
>> There are really much possibilities, but you should first answer two
>> questions: what do you want to have and what your hardware can do?
>>
>> Some examples of possible configurations provided in man page, but you
>> may want to invent something more customized. The main hardware feature
>> you should test - is a jack presence detection. More info about your
>> codec organization you may get from diagram on page 35 of codec
>> datasheet: http://www.idt.com/products/getDoc.cfm?docID=18451989
> 
> Thanks for the pointers/hints. I will play with HDA configuration if it
> is still necessary after BIOS upgrade.

I performed the upgrade, here's new verbose dmesg:
http://www.icyb.net.ua/~avg/hda.newest.dmesg.gz

Now HDA behaves more reasonable, quite close to what you predicted: pcm0
provides both playback and recording through rear jacks. Playback
through front still doesn't work, recording through front isn't tested,
but I don't expect much changes. I haven't tested pcm1 usage either.

I will try to play with configurations a little bit later.

Thank you!

-- 
Andriy Gapon