Speakers are not disabled when plug in headphones
kiorky
kiorky at cryptelium.net
Sat Mar 22 08:26:26 UTC 2008
i encounter that speakers's problem with snd_hda. This when you plug something in the headphone jack, the internal speakers are not muted.
I applied abdul's patch but without sucess.
I tried several combination of gpioX and ovref into devices.hint too.
[root at judith /home/kiorky]# uname -ar
FreeBSD judith.cryptelium.net 7.0-RELEASE FreeBSD 7.0-RELEASE #5: Fri Mar 21 22:19:15 CET 2008 kiorky at judith.cryptelium.net:/usr/obj/usr/src/sys/JUDITH i386
[root at judith /home/kiorky]# cat /dev/sndstat
FreeBSD Audio Driver (newpcm: 32bit 2007121300/i386)
Installed devices:
pcm0: <Intel 82801H High Definition Audio Controller> at memory 0xf0500000 irq 22 kld snd_hda [20071129_0050] [MPSAFE] (1p:1v/1r:1v channels duplex default)
[pcm0:play:dsp0.p0]: spd 48000, fmt 0x10000010, flags 0x00101000, 0x00000000
interrupts 2706, underruns 0, feed 2706, ready 0 [b:4096/2048/2|bs:4096/2048/2]
{userland} -> feeder_vchan(0x10000010) -> {hardware}
pcm0:play:dsp0.p0[pcm0:virtual:dsp0.vp0]: spd 44100/48000, fmt 0x10000010, flags 0x10000000, 0x00000028
interrupts 0, underruns 0, feed 0, ready 0 [b:0/0/0|bs:65536/2048/32]
{userland} -> feeder_root(0x10000010) -> feeder_rate(44100 -> 48000 q:1) -> feeder_volume(0x10000010) -> {hardware}
[pcm0:record:dsp0.r0]: spd 48000, fmt 0x10000010, flags 0x00101000, 0x00000000
interrupts 0, overruns 0, feed 0, hfree 4096, sfree 4096 [b:4096/2048/2|bs:4096/2048/2]
{hardware} -> feeder_root(0x10000010) -> feeder_vchan(0x10000010) -> {userland}
pcm0:record:dsp0.r0[pcm0:virtual:dsp0.vr0]: spd 0, fmt 0x00000000/0x00000008, flags 0x10000000, 0x00000000
interrupts 0, overruns 0, feed 0, hfree 0, sfree 0 [b:0/0/0|bs:0/0/0]
{hardware} -> feeder_root(0x00000000) -> {userland}
File Versions:
$FreeBSD: src/sys/dev/sound/pci/hda/hdac.c,v 1.44.2.5 2007/12/15 04:06:12 ariff Exp $
$FreeBSD: src/sys/dev/sound/isa/sndbuf_dma.c,v 1.3 2005/01/06 01:43:17 imp Exp $
$FreeBSD: src/sys/dev/sound/pcm/vchan.c,v 1.36 2007/06/16 03:37:28 ariff Exp $
$FreeBSD: src/sys/dev/sound/pcm/sound.c,v 1.119 2007/06/17 19:02:05 ariff Exp $
$FreeBSD: src/sys/dev/sound/pcm/sndstat.c,v 1.28 2007/06/16 03:37:28 ariff Exp $
$FreeBSD: src/sys/dev/sound/pcm/mixer.c,v 1.61 2007/06/16 03:37:28 ariff Exp $
$FreeBSD: src/sys/dev/sound/pcm/feeder_volume.c,v 1.6 2007/06/16 20:36:39 ariff Exp $
$FreeBSD: src/sys/dev/sound/pcm/feeder_rate.c,v 1.23 2007/06/16 03:37:28 ariff Exp $
$FreeBSD: src/sys/dev/sound/pcm/feeder_fmt.c,v 1.23 2007/06/02 13:07:44 joel Exp $
$FreeBSD: src/sys/dev/sound/pcm/feeder.c,v 1.44 2007/06/17 15:53:11 ariff Exp $
$FreeBSD: src/sys/dev/sound/pcm/fake.c,v 1.18 2007/03/15 18:19:01 ariff Exp $
$FreeBSD: src/sys/dev/sound/pcm/dsp.c,v 1.107 2007/07/04 12:33:11 ariff Exp $
$FreeBSD: src/sys/dev/sound/pcm/channel.c,v 1.121.2.1 2007/12/06 05:21:39 ariff Exp $
$FreeBSD: src/sys/dev/sound/pcm/buffer.c,v 1.37 2007/06/16 03:37:27 ariff Exp $
$FreeBSD: src/sys/dev/sound/pcm/ac97_patch.c,v 1.10.2.1 2007/10/29 18:47:27 ariff Exp $
$FreeBSD: src/sys/dev/sound/pcm/ac97.c,v 1.73.2.1 2007/10/29 18:47:47 ariff Exp $
[root at judith /home/kiorky]# mixer
Mixer vol is currently set to 75:75
Mixer pcm is currently set to 75:75
Mixer mic is currently set to 0:0
Mixer rec is currently set to 0:0
Recording source: mic
pciconf :
pcm0 at pci0:0:27:0: class=0x040300 card=0xc510144d chip=0x284b8086
rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H &SUBSYS_81EC1043&REV_02\3&11583659&0&D8'
class = multimedia
dmesg.boot:
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RELEASE #5: Fri Mar 21 22:19:15 CET 2008
kiorky at judith.cryptelium.net:/usr/obj/usr/src/sys/JUDITH
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz (1995.02-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6fd Stepping = 13
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20000000<LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
real memory = 2146238464 (2046 MB)
avail memory = 2082267136 (1985 MB)
ACPI APIC Table: <INTEL CRESTLNE>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
kqemu version 0x00010300
kqemu: KQEMU installed, max_locked_mem=1037452kB.
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: HPT RocketRAID controller driver v1.1 (Mar 21 2008 22:19:00)
acpi0: <SECCSD LH43STAR> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "HPET" frequency 14318180 Hz quality 900
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
nvidia0: <GeForce 8400M G> port 0x2000-0x207f mem 0xce000000-0xceffffff,0xd0000000-0xdfffffff,0xcc000000-0xcdffffff irq 16 at device 0.0 on pci1
nvidia0: [GIANT-LOCKED]
nvidia0: [ITHREAD]
uhci0: <UHCI (generic) USB controller> port 0x1800-0x181f irq 16 at device 26.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x1820-0x183f irq 21 at device 26.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf0504000-0xf05043ff irq 18 at device 26.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
uhub2: 4 ports with 4 removable, self powered
ugen0: <Vimicro Corp. Vega USB 2.0 Camera., class 239/2, rev 2.00/1.00, addr 2> on uhub2
pcm0: <Intel 82801H High Definition Audio Controller> mem 0xf0500000-0xf0503fff irq 22 at device 27.0 on pci0
pcm0: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <network> at device 0.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib3
mskc0: <Marvell Yukon 88E8039 Gigabit Ethernet> port 0x3000-0x30ff mem 0xf0200000-0xf0203fff irq 17 at device 0.0 on pci3
msk0: <Marvell Technology Group Ltd. Yukon FE Id 0xb7 Rev 0x03> on mskc0
msk0: Ethernet address: 00:13:77:5a:e8:ad
miibus0: <MII bus> on msk0
e1000phy0: <Marvell 88E3082 10/100 Fast Ethernet PHY> PHY 0 on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ukphy0: <Generic IEEE 802.3u media interface> PHY 3 on miibus0
ukphy0: no media present
ukphy1: <Generic IEEE 802.3u media interface> PHY 6 on miibus0
ukphy1: no media present
mskc0: [FILTER]
uhci2: <UHCI (generic) USB controller> port 0x1840-0x185f irq 23 at device 29.0 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb3: <UHCI (generic) USB controller> on uhci2
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0x1860-0x187f irq 19 at device 29.1 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb4: <UHCI (generic) USB controller> on uhci3
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: <UHCI (generic) USB controller> port 0x1880-0x189f irq 18 at device 29.2 on pci0
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: <UHCI (generic) USB controller> on uhci4
usb5: USB revision 1.0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xf0504400-0xf05047ff irq 23 at device 29.7 on pci0
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb6: EHCI version 1.0
usb6: companion controllers, 2 ports each: usb3 usb4 usb5
usb6: <EHCI (generic) USB 2.0 controller> on ehci1
usb6: USB revision 2.0
uhub6: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb6
uhub6: 6 ports with 6 removable, self powered
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib4
cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xf0400000-0xf0400fff at device 9.0 on pci4
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [ITHREAD]
fwohci0: <Ricoh R5C552> mem 0xf0401000-0xf04017ff at device 9.1 on pci4
fwohci0: [FILTER]
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:00:f0:41:01:07:55:17
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:00:f0:07:55:17
fwe0: Ethernet address: 02:00:f0:07:55:17
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:00:f0:41:01:07:55:17 @ 0xfffe00000000, S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x7d8fc000
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
pci4: <base peripheral> at device 9.2 (no driver attached)
pci4: <base peripheral> at device 9.3 (no driver attached)
pci4: <base peripheral> at device 9.4 (no driver attached)
pci4: <base peripheral> at device 9.5 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ATA controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x18e0-0x18ef,0x18d0-0x18df at device 31.2 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xdc000-0xdffff,0xe0000-0xe17ff pnpid ORM0000 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: <Logitech USB-PS/2 Optical Mouse, class 0/0, rev 2.00/21.00, addr 2> on uhub3
ums0: 8 buttons and Z dir.
ugen1: <Broadcom Corp BCM92045NMD, class 224/1, rev 2.00/3.54, addr 2> on uhub5
Timecounters tick every 1.000 msec
hptrr: no controller detected.
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
ad0: 152627MB <SAMSUNG HM160HI HH100-06> at ata0-master UDMA33
acd0: DVDR <TSSTcorp CDDVDW TS-L632H/SC00> at ata1-master UDMA33
pcm0: <HDA Codec: Realtek ALC262>
pcm0: <HDA Driver Revision: 20071129_0050>
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad0s4a
msk0: link state changed to UP
I tried oss41, but i have problms too but nbot the sames. I suceed in muting
internal speakers but after one hour or such the sondcard hangs and i need to
reboot to resume it.
--
--
Cordialement,
KiOrKY
GPG Key FingerPrint: 0x1A1194B7681112AF
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 197 bytes
Desc: This is a digitally signed message part.
Url : http://lists.freebsd.org/pipermail/freebsd-multimedia/attachments/20080322/b6bf8f17/attachment.pgp
More information about the freebsd-multimedia
mailing list