Speaker doesn't automute on HP Pavilion dv6904ca (snd_hda)
Carl J
carlj1752 at hotmail.com
Wed Jul 30 06:47:23 UTC 2008
Hi:
On a new HP Pavilion dv6904ca laptop,
plugging in the headphone does not automute the speakers.
After enabling verbose boot up, I tried repeatly plugging in
the headphones, but it does not generate
any message on the console (unlike my other laptop).
I've attached the verbose dmesg below, as well as brief info.
Any assistance would be greatly appreciated. Thank you!
OS: FreeBSD 7.0-RELEASE
Laptop: HP Pavilion dv6904ca
$ pciconf -l -v
pcm0 at pci0:0:7:0:
class=0x040300 card=0x30cf103c chip=0x055c10de rev=0xa1 hdr=0x00
vendor = 'Nvidia Corp'
class = multimedia
$ dmesg
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RELEASE #0: Wed Jul 30 05:33:44 UTC 2008 /usr/obj/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc116c000.
Preloaded elf module "/boot/kernel/snd_emu10k1.ko" at 0xc116c1c4.
Preloaded elf module "/boot/kernel/sound.ko" at 0xc116c274.
Preloaded elf module "/boot/kernel/snd_hda.ko" at 0xc116c320.
Preloaded elf module "/boot/kernel/acpi_video.ko" at 0xc116c3cc.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc116c47c.
Preloaded elf module "/boot/kernel/ng_ubt.ko" at 0xc116c528.
Preloaded elf module "/boot/kernel/netgraph.ko" at 0xc116c5d4.
Preloaded elf module "/boot/kernel/wlan_scan_sta.ko" at 0xc116c684.
Preloaded elf module "/boot/modules/nvidia.ko" at 0xc116c738.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc116c7e4.
Calibrating clock(s) ... i8254 clock: 1193271 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2000203008 Hz
CPU: AMD Turion(tm) 64 X2 Mobile Technology TL-60 (2000.20-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x60f82 Stepping = 2
Features=0x178bfbff
Features2=0x2001
AMD Features=0xea500800
AMD Features2=0x11f
Cores per package: 2
Data TLB: 32 entries, fully associative
Instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 internal cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
real memory = 3086286848 (2943 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009cfff, 638976 bytes (156 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001428000 - 0x00000000b4b3bfff, 3010543616 bytes (734996 pages)
avail memory = 3009576960 (2870 MB)
Table 'FACP' at 0xb7f649ba
Table 'TCPA' at 0xb7f64aae
Table 'SRAT' at 0xb7f64ae0
Table 'SSDT' at 0xb7f64b80
Table 'MCFG' at 0xb7f64d86
Table 'HPET' at 0xb7f64dc2
Table 'APIC' at 0xb7f64dfa
MADT: Found table at 0xb7f64dfa
MP Configuration Table version 1.4 found at 0xc009e571
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 1: enabled
SMP: Added CPU 1 (AP)
ACPI APIC Table:
INTR: Adding local APIC 1 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 1
bios32: Found BIOS32 Service Directory header at 0xc00f8280
bios32: Entry = 0xfdc80 (c00fdc80) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfdc80+0x12d
pnpbios: Found PnP BIOS data at 0xc00f82f0
pnpbios: Entry = f0000:9cc7 Rev = 1.0
Other BIOS signatures found:
ULE: setup cpu group 0
ULE: setup cpu 0
ULE: adding cpu 0 to group 0: cpus 1 mask 0x1
ULE: setup cpu group 1
ULE: setup cpu 1
ULE: adding cpu 1 to group 1: cpus 1 mask 0x2
ACPI: RSDP @ 0x0xf8250/0x0024 (v 2 PTLTD )
ACPI: XSDT @ 0x0xb7f5c0ce/0x006C (v 1 HPQOEM SLIC-MPC 0x06040000 LTP 0x00000000)
ACPI: FACP @ 0x0xb7f649ba/0x00F4 (v 3 NVIDIA MCP67-M 0x06040000 PTL_ 0x000F4240)
ACPI: DSDT @ 0x0xb7f5c13a/0x880C (v 1 NVIDIA MCP67 0x06040000 MSFT 0x03000000)
ACPI: FACS @ 0x0xb7f65fc0/0x0040
ACPI: TCPA @ 0x0xb7f64aae/0x0032 (v 1 Phoeni x 0x06040000 TL 0x00000000)
ACPI: SRAT @ 0x0xb7f64ae0/0x00A0 (v 1 AMD HAMMER 0x06040000 AMD 0x00000001)
ACPI: SSDT @ 0x0xb7f64b80/0x0206 (v 1 PTLTD POWERNOW 0x06040000 LTP 0x00000001)
ACPI: MCFG @ 0x0xb7f64d86/0x003C (v 1 PTLTD MCFG 0x06040000 LTP 0x00000000)
ACPI: HPET @ 0x0xb7f64dc2/0x0038 (v 1 PTLTD HPETTBL 0x06040000 LTP 0x00000001)
ACPI: APIC @ 0x0xb7f64dfa/0x0068 (v 1 PTLTD APIC 0x06040000 LTP 0x00000000)
ACPI: BOOT @ 0x0xb7f64e62/0x0028 (v 1 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001)
ACPI: SLIC @ 0x0xb7f64e8a/0x0176 (v 1 HPQOEM SLIC-MPC 0x06040000 LTP 0x00000001)
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: low
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0 irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_buffersize=16384 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
wlan:
ath_rate: version 1.2
io:
VESA: information block
56 45 53 41 00 03 00 01 00 01 01 00 00 00 22 00
00 01 00 08 67 05 07 01 00 01 1b 01 00 01 2c 01
00 01 00 01 01 01 02 01 03 01 04 01 05 01 0e 01
0f 01 11 01 12 01 14 01 15 01 17 01 18 01 30 01
VESA: 23 mode(s) found
VESA: v3.0, 131072k memory, flags:0x1, mode table:0xc084ffa2 (1000022)
VESA: NVIDIA
VESA: Build 070601.2
MCP67 - mcp67-01 Chip Rev
random:
kbd: new array size 4
kbd1 at kbdmux0
mem:
Pentium Pro MTRR support enabled
null:
ath_hal: 0.10.5.6 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133, RF2425, RF2417)
npx0: INT 16 interface
acpi0: on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xda45e000 pa 0x1000
pci_open(1): mode 1 addr port (0x0cf8) is 0x80004820
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=050000] [hdr=00] is there (id=054710de)
pcibios: BIOS version 3.00
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.LPC0.MMTO -> bus 0 dev 1 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.LPC0.P44_ -> bus 0 dev 1 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.SMB0.P60_ -> bus 0 dev 1 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.SMB0.P64_ -> bus 0 dev 1 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.SMB0.P68_ -> bus 0 dev 1 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.LPC0.PIRQ -> bus 0 dev 1 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.SMB0.SM6C -> bus 0 dev 1 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.SMB0.SM80 -> bus 0 dev 1 func 1
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: port 0x1008-0x100b on acpi0
acpi_ec0: port 0x62,0x66 on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 5
Validation 0 255 N 0 5
After Disable 0 255 N 0 5
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 7
Validation 0 255 N 0 7
After Disable 0 255 N 0 7
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 10
Validation 0 255 N 0 10
After Disable 0 255 N 0 10
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 11
Validation 0 255 N 0 11
After Disable 0 255 N 0 11
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 16
Validation 0 255 N 0 16
After Disable 0 255 N 0 16
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 17
Validation 0 255 N 0 17
After Disable 0 255 N 0 17
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 18
Validation 0 255 N 0 18
After Disable 0 255 N 0 18
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 19
Validation 0 255 N 0 19
After Disable 0 255 N 0 19
pci_link8: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 10
Validation 0 10 N 0 10
After Disable 0 255 N 0 10
pci_link9: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 18
Validation 0 255 N 0 18
After Disable 0 255 N 0 18
pci_link10: Index IRQ Rtd Ref IRQs
Initial Probe 0 7 N 0 22
Validation 0 255 N 0 22
After Disable 0 255 N 0 22
pci_link11: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 20
Validation 0 255 N 0 20
After Disable 0 255 N 0 20
pci_link12: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 21
Validation 0 255 N 0 21
After Disable 0 255 N 0 21
pci_link13: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 16
Validation 0 255 N 0 16
After Disable 0 255 N 0 16
pci_link14: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 22
Validation 0 255 N 0 22
After Disable 0 255 N 0 22
pci_link15: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 23
Validation 0 255 N 0 23
After Disable 0 255 N 0 23
pci_link16: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 18
Validation 0 255 N 0 18
After Disable 0 255 N 0 18
pci_link17: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 22
Validation 0 255 N 0 22
After Disable 0 255 N 0 22
pci_link18: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 11
Validation 0 11 N 0 11
After Disable 0 255 N 0 11
acpi_hpet0: iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: vend: 0x10de rev: 0x1 num: 2 hz: 25000000 opts: legacy_route
Timecounter "HPET" frequency 25000000 Hz quality 900
cpu0: on acpi0
cpu0: switching to generic Cx mode
powernow0: on cpu0
acpi_throttle0: on cpu0
acpi_throttle0: P_CNT from P_BLK 0x1010
cpu1: on acpi0
powernow1: on cpu1
acpi_throttle1: on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
acpi_button0: on acpi0
acpi_acad0: on acpi0
battery0: on acpi0
acpi_lid0: on acpi0
pcib0: port 0xcf8-0xcff on acpi0
ACPI: Found matching pin for 0.1.INTA at func 1: 10
ACPI: Found matching pin for 0.1.INTB at func 3: 11
pci0: on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x10de, dev=0x0547, revid=0xa2
domain=0, bus=0, slot=0, func=0
class=05-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x0548, revid=0xa2
domain=0, bus=0, slot=1, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x20a0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x0542, revid=0xa2
domain=0, bus=0, slot=1, func=1
class=0c-05-00, hdrtype=0x00, mfdev=1
cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0x3080, size 6, enabled
map[20]: type I/O Port, range 32, base 0x3040, size 6, enabled
map[24]: type I/O Port, range 32, base 0x3000, size 6, enabled
pcib0: matched entry for 0.1.INTA (src \\_SB_.PCI0.LSMB:0)
ioapic0: Changing trigger for pin 10 to level
ioapic0: Changing polarity for pin 10 to low
pcib0: slot 1 INTA routed to irq 10 via \\_SB_.PCI0.LSMB
found-> vendor=0x10de, dev=0x0541, revid=0xa2
domain=0, bus=0, slot=1, func=2
class=05-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0400, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10de, dev=0x0543, revid=0xa2
domain=0, bus=0, slot=1, func=3
class=0b-40-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=b, irq=11
map[10]: type Memory, range 32, base 0xf6200000, size 19, enabled
pcib0: matched entry for 0.1.INTB (src \\_SB_.PCI0.LPMU:0)
ioapic0: Changing trigger for pin 11 to level
ioapic0: Changing polarity for pin 11 to low
pcib0: slot 1 INTB routed to irq 11 via \\_SB_.PCI0.LPMU
found-> vendor=0x10de, dev=0x055e, revid=0xa2
domain=0, bus=0, slot=2, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xf6486000, size 12, enabled
pcib0: matched entry for 0.2.INTA (src \\_SB_.PCI0.LUS0:0)
pci_link9: Picked IRQ 18 with weight 0
pcib0: slot 2 INTA routed to irq 18 via \\_SB_.PCI0.LUS0
found-> vendor=0x10de, dev=0x055f, revid=0xa2
domain=0, bus=0, slot=2, func=1
class=0c-03-20, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=b, irq=7
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xf6489000, size 8, enabled
pcib0: matched entry for 0.2.INTB (src \\_SB_.PCI0.LUS2:0)
pci_link10: Picked IRQ 22 with weight 0
pcib0: slot 2 INTB routed to irq 22 via \\_SB_.PCI0.LUS2
found-> vendor=0x10de, dev=0x055e, revid=0xa2
domain=0, bus=0, slot=4, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xf6487000, size 12, enabled
pcib0: matched entry for 0.4.INTA (src \\_SB_.PCI0.Z018:0)
pci_link16: Picked IRQ 18 with weight 1
pcib0: slot 4 INTA routed to irq 18 via \\_SB_.PCI0.Z018
found-> vendor=0x10de, dev=0x055f, revid=0xa2
domain=0, bus=0, slot=4, func=1
class=0c-03-20, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=b, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xf6489400, size 8, enabled
pcib0: matched entry for 0.4.INTB (src \\_SB_.PCI0.Z019:0)
pci_link17: Picked IRQ 22 with weight 1
pcib0: slot 4 INTB routed to irq 22 via \\_SB_.PCI0.Z019
found-> vendor=0x10de, dev=0x0560, revid=0xa1
domain=0, bus=0, slot=6, func=0
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
powerspec 2 supports D0 D3 current D0
map[20]: type I/O Port, range 32, base 0x30c0, size 4, enabled
found-> vendor=0x10de, dev=0x055c, revid=0xa1
domain=0, bus=0, slot=7, func=0
class=04-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x05 (1250 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit, vector masks
map[10]: type Memory, range 32, base 0xf6480000, size 14, enabled
pcib0: matched entry for 0.7.INTA (src \\_SB_.PCI0.LAZA:0)
pci_link12: Picked IRQ 21 with weight 0
pcib0: slot 7 INTA routed to irq 21 via \\_SB_.PCI0.LAZA
found-> vendor=0x10de, dev=0x0561, revid=0xa2
domain=0, bus=0, slot=8, func=0
class=06-04-01, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x02 (500 ns)
found-> vendor=0x10de, dev=0x0550, revid=0xa2
domain=0, bus=0, slot=9, func=0
class=01-01-85, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
map[10]: type I/O Port, range 32, base 0x30f0, size 3, enabled
map[14]: type I/O Port, range 32, base 0x30e4, size 2, enabled
map[18]: type I/O Port, range 32, base 0x30e8, size 3, enabled
map[1c]: type I/O Port, range 32, base 0x30e0, size 2, enabled
map[20]: type I/O Port, range 32, base 0x30d0, size 4, enabled
map[24]: type Memory, range 32, base 0xf6484000, size 13, enabled
pcib0: matched entry for 0.9.INTA (src \\_SB_.PCI0.LSI0:0)
pci_link15: Picked IRQ 23 with weight 0
pcib0: slot 9 INTA routed to irq 23 via \\_SB_.PCI0.LSI0
found-> vendor=0x10de, dev=0x054c, revid=0xa2
domain=0, bus=0, slot=10, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x14 (5000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
MSI supports 8 messages, 64 bit, vector masks
map[10]: type Memory, range 32, base 0xf6488000, size 12, enabled
map[14]: type I/O Port, range 32, base 0x30f8, size 3, enabled
map[18]: type Memory, range 32, base 0xf6489c00, size 8, enabled
map[1c]: type Memory, range 32, base 0xf6489800, size 4, enabled
pcib0: matched entry for 0.10.INTA (src \\_SB_.PCI0.LMAC:0)
pci_link11: Picked IRQ 20 with weight 0
pcib0: slot 10 INTA routed to irq 20 via \\_SB_.PCI0.LMAC
found-> vendor=0x10de, dev=0x0563, revid=0xa2
domain=0, bus=0, slot=12, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
found-> vendor=0x10de, dev=0x0563, revid=0xa2
domain=0, bus=0, slot=13, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
found-> vendor=0x10de, dev=0x0531, revid=0xa2
domain=0, bus=0, slot=18, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 32, base 0xf5000000, size 24, enabled
map[14]: type Prefetchable Memory, range 64, base 0xd0000000, size 28, enabled
map[1c]: type Memory, range 64, base 0xf4000000, size 24, enabled
pcib0: matched entry for 0.18.INTA (src \\_SB_.PCI0.LGPU:0)
pci_link13: Picked IRQ 16 with weight 0
pcib0: slot 18 INTA routed to irq 16 via \\_SB_.PCI0.LGPU
found-> vendor=0x1022, dev=0x1100, revid=0x00
domain=0, bus=0, slot=24, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1101, revid=0x00
domain=0, bus=0, slot=24, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1102, revid=0x00
domain=0, bus=0, slot=24, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1103, revid=0x00
domain=0, bus=0, slot=24, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pci0: at device 0.0 (no driver attached)
isab0: at device 1.0 on pci0
isa0: on isab0
pci0: at device 1.1 (no driver attached)
pci0: at device 1.2 (no driver attached)
pci0: at device 1.3 (no driver attached)
ohci0: mem 0xf6486000-0xf6486fff irq 18 at device 2.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf6486000
ioapic0: routing intpin 18 (PCI IRQ 18) to vector 49
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: on ohci0
usb0: USB revision 1.0
uhub0: on usb0
uhub0: 7 ports with 7 removable, self powered
ehci0: mem 0xf6489000-0xf64890ff irq 22 at device 2.1 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xf6489000
ioapic0: routing intpin 22 (PCI IRQ 22) to vector 50
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb1: EHCI version 1.0
usb1: companion controller, 12 ports each: usb0
usb1: on ehci0
usb1: USB revision 2.0
uhub1: on usb1
uhub1: 7 ports with 7 removable, self powered
ohci1: mem 0xf6487000-0xf6487fff irq 18 at device 4.0 on pci0
ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf6487000
ohci1: [GIANT-LOCKED]
ohci1: [ITHREAD]
usb2: OHCI version 1.0, legacy support
usb2: on ohci1
usb2: USB revision 1.0
uhub2: on usb2
uhub2: 2 ports with 2 removable, self powered
ehci1: mem 0xf6489400-0xf64894ff irq 22 at device 4.1 on pci0
ehci1: Reserved 0x100 bytes for rid 0x10 type 3 at 0xf6489400
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb3: EHCI version 1.0
usb3: companion controller, 12 ports each: usb2
usb3: on ehci1
usb3: USB revision 2.0
uhub3: on usb3
uhub3: 2 ports with 2 removable, self powered
ugen0: on uhub3
atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x30c0-0x30cf at device 6.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x30c0
ata0: on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=00 stat1=00 devices=0x4
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 51
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1: on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 52
ata1: [MPSAFE]
ata1: [ITHREAD]
pcm0: mem 0xf6480000-0xf6483fff irq 21 at device 7.0 on pci0
pcm0: DMA Coherency: Uncacheable / vendor=0x10de
pcm0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xf6480000
ioapic0: routing intpin 21 (PCI IRQ 21) to vector 53
pcm0: [MPSAFE]
pcm0: [ITHREAD]
pcm0: hdac_dma_alloc: size=1024 -> roundsz=1024
pcm0: hdac_dma_alloc: size=2048 -> roundsz=2048
pcib1: at device 8.0 on pci0
pcib1: domain 0
pcib1: secondary bus 2
pcib1: subordinate bus 2
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xf6100000-0xf61fffff
pcib1: no prefetched decode
pcib1: Subtractively decoded bridge.
ACPI: Found matching pin for 2.5.INTA at func 0: 10
pci_link0: BIOS IRQ 10 for 2.5.INTA is invalid
ACPI: Found matching pin for 2.5.INTB at func 1: 11
pci_link1: BIOS IRQ 11 for 2.5.INTB is invalid
pci2: on pcib1
pci2: domain=0, physical bus=2
found-> vendor=0x1180, dev=0x0832, revid=0x05
domain=0, bus=2, slot=5, func=0
class=0c-00-10, hdrtype=0x00, mfdev=1
cmdreg=0x0100, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0, size 11, memory disabled
pcib1: matched entry for 2.5.INTA (src \\_SB_.PCI0.LNK1:0)
pci_link0: Picked IRQ 9 with weight 0
pcib1: slot 5 INTA routed to irq 9 via \\_SB_.PCI0.LNK1
found-> vendor=0x1180, dev=0x0822, revid=0x22
domain=0, bus=2, slot=5, func=1
class=08-05-00, hdrtype=0x00, mfdev=1
cmdreg=0x0106, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xf6100800, size 8, enabled
pcib1: requested memory range 0xf6100800-0xf61008ff: good
pcib1: matched entry for 2.5.INTB (src \\_SB_.PCI0.LNK2:0)
pci_link1: Picked IRQ 9 with weight 1
pcib1: slot 5 INTB routed to irq 9 via \\_SB_.PCI0.LNK2
found-> vendor=0x1180, dev=0x0843, revid=0x12
domain=0, bus=2, slot=5, func=2
class=08-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0106, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xf6100c00, size 8, enabled
pcib1: requested memory range 0xf6100c00-0xf6100cff: good
pcib1: matched entry for 2.5.INTB (src \\_SB_.PCI0.LNK2:0)
pcib1: slot 5 INTB routed to irq 9 via \\_SB_.PCI0.LNK2
found-> vendor=0x1180, dev=0x0592, revid=0x12
domain=0, bus=2, slot=5, func=3
class=08-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0106, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xf6101000, size 8, enabled
pcib1: requested memory range 0xf6101000-0xf61010ff: good
pcib1: matched entry for 2.5.INTB (src \\_SB_.PCI0.LNK2:0)
pcib1: slot 5 INTB routed to irq 9 via \\_SB_.PCI0.LNK2
found-> vendor=0x1180, dev=0x0852, revid=0x12
domain=0, bus=2, slot=5, func=4
class=08-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0106, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xf6101400, size 8, enabled
pcib1: requested memory range 0xf6101400-0xf61014ff: good
pcib1: matched entry for 2.5.INTB (src \\_SB_.PCI0.LNK2:0)
pcib1: slot 5 INTB routed to irq 9 via \\_SB_.PCI0.LNK2
pci2: at device 5.0 (no driver attached)
pci2: at device 5.1 (no driver attached)
pci2: at device 5.2 (no driver attached)
pci2: at device 5.3 (no driver attached)
pci2: at device 5.4 (no driver attached)
atapci1: port 0x30f0-0x30f7,0x30e4-0x30e7,0x30e8-0x30ef,0x30e0-0x30e3,0x30d0-0x30df mem 0xf6484000-0xf6485fff irq 23 at device 9.0 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x30d0
ioapic0: routing intpin 23 (PCI IRQ 23) to vector 54
atapci1: [MPSAFE]
atapci1: [ITHREAD]
ata2: on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x30f0
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0x30e4
ata2: reset tp1 mask=03 ostat0=50 ostat1=7f
ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: stat1=0xff err=0xff lsb=0xff msb=0xff
ata2: stat1=0xff err=0xff lsb=0xff msb=0xff
ata2: stat1=0xff err=0xff lsb=0xff msb=0xff
ata2: stat1=0xff err=0xff lsb=0xff msb=0xff
ata2: stat1=0xff err=0xff lsb=0xff msb=0xff
ata2: stat1=0xff err=0xff lsb=0xff msb=0xff
ata2: stat1=0xff err=0xff lsb=0xff msb=0xff
ata2: stat1=0xff err=0xff lsb=0xff msb=0xff
ata2: stat1=0xff err=0xff lsb=0xff msb=0xff
ata2: stat1=0xff err=0xff lsb=0xff msb=0xff
ata2: stat1=0xff err=0xff lsb=0xff msb=0xff
ata2: stat1=0xff err=0xff lsb=0xff msb=0xff
ata2: stat1=0xff err=0xff lsb=0xff msb=0xff
ata2: stat1=0xff err=0xff lsb=0xff msb=0xff
ata2: stat1=0xff err=0xff lsb=0xff msb=0xff
ata2: stat1=0xff err=0xff lsb=0xff msb=0xff
ata2: stat1=0xff err=0xff lsb=0xff msb=0xff
ata2: stat1=0xff err=0xff lsb=0xff msb=0xff
ata2: stat1=0xff err=0xff lsb=0xff msb=0xff
ata2: stat1=0xff err=0xff lsb=0xff msb=0xff
ata2: stat1=0xff err=0xff lsb=0xff msb=0xff
ata2: stat1=0xff err=0xff lsb=0xff msb=0xff
ata2: reset tp2 stat0=50 stat1=ff devices=0x1
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x30e8
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0x30e0
ata3: reset tp1 mask=00 ostat0=ff ostat1=ff
ata3: [MPSAFE]
ata3: [ITHREAD]
nfe0: port 0x30f8-0x30ff mem 0xf6488000-0xf6488fff,0xf6489c00-0xf6489cff,0xf6489800-0xf648980f irq 20 at device 10.0 on pci0
nfe0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf6488000
nfe0: attempting to allocate 8 MSI vectors (8 supported)
msi: routing MSI IRQ 256 to vector 56
msi: routing MSI IRQ 257 to vector 57
msi: routing MSI IRQ 258 to vector 58
msi: routing MSI IRQ 259 to vector 59
msi: routing MSI IRQ 260 to vector 60
msi: routing MSI IRQ 261 to vector 61
msi: routing MSI IRQ 262 to vector 62
msi: routing MSI IRQ 263 to vector 63
nfe0: using IRQs 256-263 for MSI
nfe0: Using 8 MSI messages
miibus0: on nfe0
rlphy0: PHY 1 on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib2: at device 12.0 on pci0
pcib2: domain 0
pcib2: secondary bus 4
pcib2: subordinate bus 5
pcib2: I/O decode 0x4000-0x4fff
pcib2: memory decode 0xf2000000-0xf3ffffff
pcib2: prefetched decode 0xf0000000-0xf1ffffff
pci4: on pcib2
pci4: domain=0, physical bus=4
pcib3: at device 13.0 on pci0
pcib3: domain 0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0xf000-0xfff
pcib3: memory decode 0xf6000000-0xf60fffff
pcib3: no prefetched decode
pci3: on pcib3
pci3: domain=0, physical bus=3
found-> vendor=0x168c, dev=0x001c, revid=0x01
domain=0, bus=3, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
MSI-X supports 1 message in map 0x10
map[10]: type Memory, range 64, base 0xf6000000, size 16, enabled
pcib3: requested memory range 0xf6000000-0xf600ffff: good
pcib3: matched entry for 3.0.INTA (src \\_SB_.PCI0.LK4E:0)
pci_link7: Picked IRQ 19 with weight 0
pcib3: slot 0 INTA routed to irq 19 via \\_SB_.PCI0.LK4E
vgapci0: mem 0xf5000000-0xf5ffffff,0xd0000000-0xdfffffff,0xf4000000-0xf4ffffff irq 16 at device 18.0 on pci0
acpi_video0: on vgapci0
found VGA CRT or VESA Compatible Analog Monitor(100), idx#0, port#0, detectable by BIOS, head #0
found Internal/Integrated Digital Flat Panel(110), idx#0, port#1, detectable by BIOS, head #0
found TV/HDTV or Analog-Video Monitor(200), idx#0, port#0, detectable by BIOS, head #0
nvidia0: on vgapci0
vgapci0: child nvidia0 requested pci_enable_busmaster
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: Reserved 0x1000000 bytes for rid 0x10 type 3 at 0xf5000000
vgapci0: Reserved 0x10000000 bytes for rid 0x14 type 3 at 0xd0000000
vgapci0: Reserved 0x1000000 bytes for rid 0x1c type 3 at 0xf4000000
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 64
nvidia0: [GIANT-LOCKED]
nvidia0: [ITHREAD]
acpi_button1: on acpi0
acpi_tz0: on acpi0
acpi_tz0: _CRT value is absurd, ignored (-72.6C)
atkbdc0: port 0x60,0x64 irq 1 on acpi0
atkbd0: irq 1 on atkbdc0
kbd0 at atkbd0
kbd0: atkbd0, generic (0), config:0x0, flags:0x3f0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 65
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
psmcpnp0: irq 12 on acpi0
psm0: current command byte:0047
psm0: irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to vector 66
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Synaptics Touchpad, device ID 0-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:6
psm0: syncmask:c0, syncbits:00
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: at iomem 0xcf800-0xd0fff pnpid ORM0000 on isa0
sc0: at flags 0x100 on isa0
sc0: VGA
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
ppc0: parallel port not found.
ppc0: failed to probe at irq 7 on isa0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0x2a1 0x2a1 0x2a1 0x2a1
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0x2a1 0x2a1 0x2a1 0x2a1
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 67
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x2a1 0x2a1 0x2a1 0x2a1
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 190144 -> 100000
procfs registered
lapic: Divisor 2, Frequency 100010156 hz
Timecounter "TSC" frequency 2000203008 Hz quality -100
Timecounters tick every 1.000 msec
Linux ELF exec handler installed
lo0: bpf attached
ipfw2 initialized, divert enabled, rule-based forwarding disabled, default to deny, logging disabled
DUMMYNET with IPv6 initialized (040826)
acpi_acad0: acline initialization startacpi_tz0: _CRT value is absurd, ignored (-72.6C)
battery0: battery initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
ata0-master: pio=PIO4 wdma=WDMA2 udma=UNSUPPORTED cable=80 wire
acd0: setting PIO4 on nForce MCP67 chip
acd0: DVDR drive at ata0 as master
acd0: read 4133KB/s (4133KB/s) write 4133KB/s (4133KB/s), 2000KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire
ad4: 305245MB at ata2-master UDMA33
ad4: 625142448 sectors [620181C/16H/63S] 16 sectors/interrupt 1 depth queue
battery0: battery initialization done, tried 1 times
pcm0: HDA_DEBUG: HDA Config: on=0x00000000 off=0x00000000
pcm0: HDA_DEBUG: Starting CORB Engine...
pcm0: HDA_DEBUG: Starting RIRB Engine...
pcm0: HDA_DEBUG: Enabling controller interrupt...
pcm0: HDA_DEBUG: Scanning HDA codecs [start index=0] ...
pcm0: HDA_DEBUG: Probing codec: 0
pcm0: HDA_DEBUG: startnode=1 endnode=3
pcm0: HDA_DEBUG: Found AFG nid=1 [startnode=1 endnode=3]
pcm0: HDA_DEBUG: Parsing AFG nid=1 cad=0
pcm0: Vendor: 0x000014f1
pcm0: Device: 0x00005051
pcm0: Revision: 0x00000000
pcm0: Stepping: 0x00000000
pcm0: PCI Subvendor: 0x30cf103c
pcm0: Nodes: start=16 endnode=31 total=15
pcm0: CORB size: 256
pcm0: RIRB size: 256
pcm0: Streams: ISS=4 OSS=4 BSS=0
pcm0: GPIO: 0x40000004
pcm0: NumGPIO=4 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=1
pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=20 entries=2 found=2
pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=21 entries=1 found=1
pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=22 entries=2 found=2
pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=25 entries=2 found=2
pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=26 entries=2 found=2
pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=27 entries=2 found=2
pcm0: HDA_DEBUG: hdac_widget_connection_parse: nid=28 entries=1 found=1
pcm0: HDA_DEBUG: Parsing Ctls...
pcm0: HDA_DEBUG: Parsing vendor patch...
pcm0: HDA_DEBUG: Building AFG tree...
pcm0: HDA_DEBUG: HWiP: HDA Widget Parser - Revision 1
pcm0: HDA_DEBUG: HWiP: 0 DAC path found! Retrying parser using HDA_PARSE_DIRECT strategy.
pcm0: HDA_DEBUG: HWiP: Found 4 DAC path using HDA_PARSE_DIRECT strategy.
pcm0: HDA_DEBUG: AFG commit...
pcm0: HDA_DEBUG: Ctls commit...
pcm0: [ 5] Ctl nid=21 Bind to NONE
pcm0: [ 7] Ctl nid=24 DISABLED
pcm0: [ 8] Ctl nid=29 DISABLED
pcm0: HDA_DEBUG: PCMDIR_PLAY setup...
pcm0: HDA_DEBUG: PCMDIR_REC setup...
pcm0: HDA_DEBUG: OSS mixer initialization...
pcm0: Mixer "vol":
pcm0: Mixer "pcm":
pcm0: Mixer "speaker":
pcm0: Mixer "mic":
pcm0: Mixer "rec":
pcm0: HDA_DEBUG: Registering PCM channels...
pcm0: clone manager: deadline=750ms flags=0x8000001e
pcm0: hdac_dma_alloc: size=4096 -> roundsz=4096
pcm0: sndbuf_setmap 1a74000, 2000; 0xe6d07000 -> 1a74000
pcm0: hdac_dma_alloc: size=4096 -> roundsz=4096
pcm0: sndbuf_setmap 1a78000, 2000; 0xe6d09000 -> 1a78000
pcm0:
pcm0:
pcm0:
pcm0:
pcm0: HDA config/quirks: forcestereo ivref50 ivref80 ivref100 ivref
pcm0:
pcm0: +-------------------+
pcm0: | DUMPING HDA NODES |
pcm0: +-------------------+
pcm0:
pcm0: Default Parameter
pcm0: -----------------
pcm0: Stream cap: 0x00000001
pcm0: Format: PCM
pcm0: PCM cap: 0x000e0160
pcm0: PCM size: 16 20 24
pcm0: PCM rate: 44 48 96
pcm0: IN amp: 0x00000000
pcm0: OUT amp: 0x00000000
pcm0:
pcm0: nid: 16 [ANALOG]
pcm0: name: audio output
pcm0: widget_cap: 0x00000c1d
pcm0: Parse flags: 0x00000001
pcm0: Ctl flags: 0x00000011
pcm0: Stream cap: 0x00000001
pcm0: Format: PCM
pcm0: PCM cap: 0x000e0560
pcm0: PCM size: 16 20 24
pcm0: PCM rate: 44 48 96 192
pcm0: Output amp: 0x00034a4a
pcm0: mute=0 step=74 size=3 offset=74
pcm0: connections: 0
pcm0:
pcm0: nid: 17 [ANALOG]
pcm0: name: audio output
pcm0: widget_cap: 0x00000c1d
pcm0: Parse flags: 0x00000001
pcm0: Ctl flags: 0x00000011
pcm0: Stream cap: 0x00000001
pcm0: Format: PCM
pcm0: PCM cap: 0x000e0560
pcm0: PCM size: 16 20 24
pcm0: PCM rate: 44 48 96 192
pcm0: Output amp: 0x00034a4a
pcm0: mute=0 step=74 size=3 offset=74
pcm0: connections: 0
pcm0:
pcm0: nid: 18 [DIGITAL] [DISABLED]
pcm0: name: audio output
pcm0: widget_cap: 0x00000211
pcm0: Parse flags: 0x00000000
pcm0: Ctl flags: 0x00000000
pcm0: Stream cap: 0x00000005
pcm0: Format: AC3 PCM
pcm0: PCM cap: 0x000e0160
pcm0: PCM size: 16 20 24
pcm0: PCM rate: 44 48 96
pcm0: connections: 0
pcm0:
pcm0: nid: 19 [ANALOG]
pcm0: name: beep widget
pcm0: widget_cap: 0x0070000c
pcm0: Parse flags: 0x00000000
pcm0: Ctl flags: 0x00000021
pcm0: Output amp: 0x00170303
pcm0: mute=0 step=3 size=23 offset=3
pcm0: connections: 0
pcm0:
pcm0: nid: 20 [ANALOG]
pcm0: name: audio input
pcm0: widget_cap: 0x00100d1b
pcm0: Parse flags: 0x00000006
pcm0: Ctl flags: 0x00000800
pcm0: Stream cap: 0x00000001
pcm0: Format: PCM
pcm0: PCM cap: 0x000e0160
pcm0: PCM size: 16 20 24
pcm0: PCM rate: 44 48 96
pcm0: Input amp: 0x0003504a
pcm0: mute=0 step=80 size=3 offset=74
pcm0: connections: 2
pcm0: |
pcm0: + <- nid=29 [pin: line out (none)] [DISABLED]
pcm0: |
pcm0: + <- nid=23 [pin: Mic in (jack)] (selected)
pcm0:
pcm0: nid: 21 [ANALOG]
pcm0: name: audio input
pcm0: widget_cap: 0x00100d1b
pcm0: Parse flags: 0x00000000
pcm0: Ctl flags: 0x00000000
pcm0: Stream cap: 0x00000001
pcm0: Format: PCM
pcm0: PCM cap: 0x000e0160
pcm0: PCM size: 16 20 24
pcm0: PCM rate: 44 48 96
pcm0: Input amp: 0x0003504a
pcm0: mute=0 step=80 size=3 offset=74
pcm0: connections: 1
pcm0: |
pcm0: + <- nid=24 [pin: line out (none)] [DISABLED]
pcm0:
pcm0: nid: 22 [ANALOG]
pcm0: name: pin: headphones out (jack)
pcm0: widget_cap: 0x00400581
pcm0: Parse flags: 0x00000001
pcm0: Ctl flags: 0x00000000
pcm0: Pin cap: 0x0000001c
pcm0: HP OUT : UNSOL
pcm0: Pin config: 0x02211030
pcm0: Pin control: 0x000000c0 HP OUT
pcm0: connections: 2
pcm0: |
pcm0: + <- nid=16 [audio output] (selected)
pcm0: |
pcm0: + <- nid=17 [audio output]
pcm0:
pcm0: nid: 23 [ANALOG]
pcm0: name: pin: Mic in (jack)
pcm0: widget_cap: 0x0040048b
pcm0: Parse flags: 0x00000002
pcm0: Ctl flags: 0x00000080
pcm0: Pin cap: 0x00001224
pcm0: IN VREF[ 50 80 ] : UNSOL
pcm0: Pin config: 0x02a19020
pcm0: Pin control: 0x00000024 IN
pcm0: Input amp: 0x00270400
pcm0: mute=0 step=4 size=39 offset=0
pcm0: connections: 0
pcm0:
pcm0: nid: 24 [ANALOG] [DISABLED]
pcm0: name: pin: line out (none)
pcm0: widget_cap: 0x0040048b
pcm0: Parse flags: 0x00000000
pcm0: Ctl flags: 0x00000000
pcm0: Pin cap: 0x00001224
pcm0: IN VREF[ 50 80 ] : UNSOL
pcm0: Pin config: 0x400001f0
pcm0: Pin control: 0x00000020 IN
pcm0: Input amp: 0x00270400
pcm0: mute=0 step=4 size=39 offset=0
pcm0: connections: 0
pcm0:
pcm0: nid: 25 [ANALOG] [DISABLED]
pcm0: name: pin: line out (none)
pcm0: widget_cap: 0x00400581
pcm0: Parse flags: 0x00000000
pcm0: Ctl flags: 0x00000000
pcm0: Pin cap: 0x00000014
pcm0: OUT : UNSOL
pcm0: Pin config: 0x400001f0
pcm0: Pin control: 0x00000040 OUT
pcm0: connections: 2
pcm0: |
pcm0: + <- nid=16 [audio output]
pcm0: |
pcm0: + <- nid=17 [audio output]
pcm0:
pcm0: nid: 26 [ANALOG]
pcm0: name: pin: speaker (fixed)
pcm0: widget_cap: 0x00400501
pcm0: Parse flags: 0x00000001
pcm0: Ctl flags: 0x00000000
pcm0: Pin cap: 0x00010010
pcm0: OUT EAPD
pcm0: Pin config: 0x95170110
pcm0: Pin control: 0x00000040 OUT
pcm0: EAPD: 0x00000002
pcm0: connections: 2
pcm0: |
pcm0: + <- nid=16 [audio output] (selected)
pcm0: |
pcm0: + <- nid=17 [audio output]
pcm0:
pcm0: nid: 27 [ANALOG] [DISABLED]
pcm0: name: pin: line out (none)
pcm0: widget_cap: 0x00400500
pcm0: Parse flags: 0x00000000
pcm0: Ctl flags: 0x00000000
pcm0: Pin cap: 0x00010010
pcm0: OUT EAPD
pcm0: Pin config: 0x400001f0
pcm0: Pin control: 0x00000040 OUT
pcm0: EAPD: 0x00000002
pcm0: connections: 2
pcm0: |
pcm0: + <- nid=16 [audio output]
pcm0: |
pcm0: + <- nid=17 [audio output]
pcm0:
pcm0: nid: 28 [DIGITAL] [DISABLED]
pcm0: name: pin: SPDIF out (jack)
pcm0: widget_cap: 0x00400701
pcm0: Parse flags: 0x00000000
pcm0: Ctl flags: 0x00000000
pcm0: Pin cap: 0x00000010
pcm0: OUT
pcm0: Pin config: 0x224511f0
pcm0: Pin control: 0x00000040 OUT
pcm0: connections: 1
pcm0: |
pcm0: + <- nid=18 [audio output] [DISABLED]
pcm0:
pcm0: nid: 29 [ANALOG] [DISABLED]
pcm0: name: pin: line out (none)
pcm0: widget_cap: 0x0040040b
pcm0: Parse flags: 0x00000000
pcm0: Ctl flags: 0x00000000
pcm0: Pin cap: 0x00000020
pcm0: IN
pcm0: Pin config: 0x400001f0
pcm0: Pin control: 0x00000020 IN
pcm0: Input amp: 0x00270400
pcm0: mute=0 step=4 size=39 offset=0
pcm0: connections: 0
pcm0:
pcm0: nid: 30 [ANALOG]
pcm0: name: vendor widget
pcm0: widget_cap: 0x00f00000
pcm0: Parse flags: 0x00000000
pcm0: Ctl flags: 0x00000000
pcm0: connections: 0
pcm0:
pcm0: +------------------------+
pcm0: | DUMPING HDA AMPLIFIERS |
pcm0: +------------------------+
pcm0:
pcm0: 1: nid=16 dir=0x1 index=0 ossmask=0x00000011 ossdev=4
pcm0: 2: nid=17 dir=0x1 index=0 ossmask=0x00000011 ossdev=4
pcm0: 3: nid=19 dir=0x1 index=0 ossmask=0x00000021 ossdev=5
pcm0: 4: nid=20 dir=0x2 index=0 ossmask=0x00000800 ossdev=0
pcm0: 5: nid=21 dir=0x2 index=0 ossmask=0x00000000 ossdev=0
pcm0: 6: nid=23 dir=0x2 index=0 ossmask=0x00000080 ossdev=7
pcm0: 7: nid=24 dir=0x2 index=0 ossmask=0x00000000 ossdev=0 [DISABLED]
pcm0: 8: nid=29 dir=0x2 index=0 ossmask=0x00000000 ossdev=0 [DISABLED]
pcm0:
pcm0: +-----------------------------------+
pcm0: | DUMPING HDA AUDIO/VOLUME CONTROLS |
pcm0: +-----------------------------------+
pcm0:
pcm0: Master Volume (OSS: vol)
pcm0: |
pcm0: +- nid: 16 index: 0 mute: 0 step: 74 size: 3 off: 74 dir=0x1 ossmask=0x00000011
pcm0: |
pcm0: +- nid: 17 index: 0 mute: 0 step: 74 size: 3 off: 74 dir=0x1 ossmask=0x00000011
pcm0: |
pcm0: +- nid: 19 index: 0 mute: 0 step: 3 size: 23 off: 3 dir=0x1 ossmask=0x00000021
pcm0:
pcm0: PCM Volume (OSS: pcm)
pcm0: |
pcm0: +- nid: 16 index: 0 mute: 0 step: 74 size: 3 off: 74 dir=0x1 ossmask=0x00000011
pcm0: |
pcm0: +- nid: 17 index: 0 mute: 0 step: 74 size: 3 off: 74 dir=0x1 ossmask=0x00000011
pcm0:
pcm0: Microphone Volume (OSS: mic)
pcm0: |
pcm0: +- nid: 23 index: 0 mute: 0 step: 4 size: 39 off: 0 dir=0x2 ossmask=0x00000080
pcm0:
pcm0: Recording Level (OSS: rec)
pcm0: |
pcm0: +- nid: 20 index: 0 mute: 0 step: 80 size: 3 off: 74 dir=0x2 ossmask=0x00000800
pcm0:
pcm0: Speaker/Beep (OSS: speaker)
pcm0: |
pcm0: +- nid: 19 index: 0 mute: 0 step: 3 size: 23 off: 3 dir=0x1 ossmask=0x00000021
pcm0:
pcm0: Playback path:
pcm0:
pcm0: nid=22 [pin: headphones out (jack)]
pcm0: ^
pcm0: |
pcm0: +-----<------+
pcm0: ^
pcm0: |
pcm0: nid=16 [audio output]
pcm0:
pcm0: nid=26 [pin: speaker (fixed)]
pcm0: ^
pcm0: |
pcm0: +-----<------+
pcm0: ^
pcm0: |
pcm0: nid=16 [audio output]
pcm0:
pcm0: Recording sources:
pcm0:
pcm0: nid=20 [audio input]
pcm0: |
pcm0: + <- nid=23 [pin: Mic in (jack)] [recsrc: mic]
pcm0:
pcm0: +--------------------------------------+
pcm0: | DUMPING PCM Playback/Record Channels |
pcm0: +--------------------------------------+
pcm0:
pcm0: PCM Playback: 1
pcm0: Stream cap: 0x00000001
pcm0: Format: PCM
pcm0: PCM cap: 0x000e0560
pcm0: PCM size: 16 20 24
pcm0: PCM rate: 44 48 96 192
pcm0: DAC: 16 17
pcm0:
pcm0: PCM Record: 1
pcm0: Stream cap: 0x00000001
pcm0: Format: PCM
pcm0: PCM cap: 0x000e0160
pcm0: PCM size: 16 20 24
pcm0: PCM rate: 44 48 96
pcm0: ADC: 20
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
ioapic0: Assigning ISA IRQ 1 to local APIC 0
ioapic0: Assigning ISA IRQ 4 to local APIC 1
ioapic0: Assigning ISA IRQ 9 to local APIC 0
ioapic0: Assigning ISA IRQ 12 to local APIC 1
ioapic0: Assigning ISA IRQ 14 to local APIC 0
ioapic0: Assigning ISA IRQ 15 to local APIC 1
ioapic0: Assigning PCI IRQ 16 to local APIC 0
ioapic0: Assigning PCI IRQ 18 to local APIC 1
ioapic0: Assigning PCI IRQ 19 to local APIC 0
ioapic0: Assigning PCI IRQ 21 to local APIC 1
ioapic0: Assigning PCI IRQ 22 to local APIC 0
ioapic0: Assigning PCI IRQ 23 to local APIC 1
msi: Assigning MSI IRQ 256 to local APIC 0
msi: Assigning MSI IRQ 257 to local APIC 1
msi: Assigning MSI IRQ 258 to local APIC 0
msi: Assigning MSI IRQ 259 to local APIC 1
msi: Assigning MSI IRQ 260 to local APIC 0
msi: Assigning MSI IRQ 261 to local APIC 1
msi: Assigning MSI IRQ 262 to local APIC 0
msi: Assigning MSI IRQ 263 to local APIC 1
GEOM: new disk ad4
GEOM: new disk cd0
Trying to mount root from ufs:/dev/ad4s3a
start_init: trying /sbin/init
_________________________________________________________________
Keep your kids safer online with Windows Live Family Safety.
http://www.windowslive.com/family_safety/overview.html?ocid=TXT_TAGLM_WL_family_safety_072008
More information about the freebsd-multimedia
mailing list