[Fwd: transcode-1.0.6_1 failed on amd64 6]

Fri Aug 29 18:27:29 UTC 2008

-------- Přeposlaná zpráva --------
> Od: User Ports-amd64 <ports-amd64 at FreeBSD.org>
> Komu: cvs at oook.cz
> Předmět: transcode-1.0.6_1 failed on amd64 6
> Datum: Fri, 29 Aug 2008 16:10:40 GMT
> 
> You can also find this build log at
> 
>   http://pointyhat.FreeBSD.org/errorlogs/amd64-errorlogs/a.6.20080829144210/transcode-1.0.6_1.log
> 
> building transcode-1.0.6_1 on gohan12.freebsd.org
> in directory /y/pkgbuild/6/20080829144210/chroot/73383
> building for: 6.3-STABLE amd64
> maintained by: multimedia at FreeBSD.org
> port directory: /usr/ports/multimedia/transcode
> Makefile ident: $FreeBSD: ports/multimedia/transcode/Makefile,v 1.110 2008/08/15 22:42:37 db Exp $
> build started at Fri Aug 29 16:09:52 UTC 2008
> FETCH_DEPENDS=
> PATCH_DEPENDS=
> EXTRACT_DEPENDS=
> BUILD_DEPENDS=faad2-2.6.1,1.tbz ffmpeg-2008.07.27_6.tbz gettext-0.17_1.tbz gmake-3.81_3.tbz gpac-libgpac-0.4.4,1.tbz jpeg-6b_7.tbz liba52-0.7.4_2.tbz libdvdread-0.9.7_3.tbz libiconv-1.11_1.tbz libmpeg2-0.5.1.tbz libogg-1.1.3,4.tbz libtheora-1.0.b2.tbz libtool-1.5.26.tbz libvorbis-1.2.0_2,3.tbz libxml2-2.6.32.tbz pkg-config-0.23_1.tbz x264-0.0.20080409_2.tbz
> RUN_DEPENDS=faad2-2.6.1,1.tbz ffmpeg-2008.07.27_6.tbz gpac-libgpac-0.4.4,1.tbz jpeg-6b_7.tbz liba52-0.7.4_2.tbz libdvdread-0.9.7_3.tbz libiconv-1.11_1.tbz libmpeg2-0.5.1.tbz libogg-1.1.3,4.tbz libtheora-1.0.b2.tbz libvorbis-1.2.0_2,3.tbz libxml2-2.6.32.tbz pkg-config-0.23_1.tbz x264-0.0.20080409_2.tbz
> prefixes: LOCALBASE=usr/local X11BASE=usr/local
> add_pkg
> ================================================================
> ====================<phase 1: make checksum>====================
> 
> You can enable extra optimizations by defining WITH_OPTIMIZED_CFLAGS.
> 
> You can enable text/subtitler modules by defining WITH_FREETYPE.
> 
> You can enable libogg support by defining WITH_OGG.
> 
> You can enable libvorbis support by defining WITH_VORBIS.
> 
> You can enable libtheora support by defining WITH_THEORA.
> 
> You can enable MJPEG portions by defining WITH_JPEGMMX.
> 
> You can enable ImageMagick-dependent modules by defining WITH_IMAGEMAGICK.
> 
> You can enable realtime-previewing by defining WITH_SDL.
> This implies WITH_LIBDV.
> 
> You can enable libxml2-dependent modules by defining WITH_XML.
> 
> You can enable lame-dependent modules by defining WITH_LAME.
> You will probably want to enable this, if you plan to
> rip DVDs or dub videos.
> 
> You can enable libdv-support by defining WITH_LIBDV.
> You will probably want to enable this, if you plan to
> transcode DV data from a digital videocamera.
> 
> You can enable liba52-support by defining WITH_LIBA52.
> You will probably want to enable this, if you plan to
> rip DVDs.
> 
> You can use liba52 as default audio encoder by defining WITH_LIBA52_DEFAULT.
> This implies WITH_LIBA52.
> 
> You can enable avifile-dependent modules by defining WITH_AVIFILE.
> 
> You can enable quicktime-dependent modules by defining WITH_QUICKTIME.
> 
> You can enable libfame-support by defining WITH_FAME.
> 
> You can enable xvid support by defining WITH_XVID.
> You will probably want to enable this, if you plan to
> rip DVDs.
> 
> You can enable liblzo support by defining WITH_LZO.
> 
> You can enable support for bktr(4) devices by defining WITH_BKTR.
> => transcode-1.0.6.tar.bz2 doesn't seem to exist in /tmp/distfiles/.
> => Attempting to fetch from ftp://ftp-master.freebsd.org/pub/FreeBSD/ports/distfiles/.
> transcode-1.0.6.tar.bz2                               1891 kB   12 MBps
> => MD5 Checksum OK for transcode-1.0.6.tar.bz2.
> => SHA256 Checksum OK for transcode-1.0.6.tar.bz2.
> ================================================================
> ====================<phase 2: make extract>====================
> add_pkg
> 
> You can enable extra optimizations by defining WITH_OPTIMIZED_CFLAGS.
> 
> You can enable text/subtitler modules by defining WITH_FREETYPE.
> 
> You can enable libogg support by defining WITH_OGG.
> 
> You can enable libvorbis support by defining WITH_VORBIS.
> 
> You can enable libtheora support by defining WITH_THEORA.
> 
> You can enable MJPEG portions by defining WITH_JPEGMMX.
> 
> You can enable ImageMagick-dependent modules by defining WITH_IMAGEMAGICK.
> 
> You can enable realtime-previewing by defining WITH_SDL.
> This implies WITH_LIBDV.
> 
> You can enable libxml2-dependent modules by defining WITH_XML.
> 
> You can enable lame-dependent modules by defining WITH_LAME.
> You will probably want to enable this, if you plan to
> rip DVDs or dub videos.
> 
> You can enable libdv-support by defining WITH_LIBDV.
> You will probably want to enable this, if you plan to
> transcode DV data from a digital videocamera.
> 
> You can enable liba52-support by defining WITH_LIBA52.
> You will probably want to enable this, if you plan to
> rip DVDs.
> 
> You can use liba52 as default audio encoder by defining WITH_LIBA52_DEFAULT.
> This implies WITH_LIBA52.
> 
> You can enable avifile-dependent modules by defining WITH_AVIFILE.
> 
> You can enable quicktime-dependent modules by defining WITH_QUICKTIME.
> 
> You can enable libfame-support by defining WITH_FAME.
> 
> You can enable xvid support by defining WITH_XVID.
> You will probably want to enable this, if you plan to
> rip DVDs.
> 
> You can enable liblzo support by defining WITH_LZO.
> 
> You can enable support for bktr(4) devices by defining WITH_BKTR.
> ===>  Extracting for transcode-1.0.6_1
> => MD5 Checksum OK for transcode-1.0.6.tar.bz2.
> => SHA256 Checksum OK for transcode-1.0.6.tar.bz2.
> ================================================================
> ====================<phase 3: make patch>====================
> add_pkg
> ===>  Patching for transcode-1.0.6_1
> ===>  Applying FreeBSD patches for transcode-1.0.6_1
> /usr/bin/sed -i.bak -e 's|%%NUV%%||' /work/a/ports/multimedia/transcode/work/transcode-1.0.6/import/Makefile.in
> ================================================================
> ====================<phase 4: make build>====================
> add_pkg faad2-2.6.1,1.tbz ffmpeg-2008.07.27_6.tbz gettext-0.17_1.tbz gmake-3.81_3.tbz gpac-libgpac-0.4.4,1.tbz jpeg-6b_7.tbz liba52-0.7.4_2.tbz libdvdread-0.9.7_3.tbz libiconv-1.11_1.tbz libmpeg2-0.5.1.tbz libogg-1.1.3,4.tbz libtheora-1.0.b2.tbz libtool-1.5.26.tbz libvorbis-1.2.0_2,3.tbz libxml2-2.6.32.tbz pkg-config-0.23_1.tbz x264-0.0.20080409_2.tbz
> adding dependencies
> pkg_add faad2-2.6.1,1.tbz
> pkg_add ffmpeg-2008.07.27_6.tbz
> pkg_add gettext-0.17_1.tbz
> pkg_add gmake-3.81_3.tbz
> pkg_add gpac-libgpac-0.4.4,1.tbz
> skipping gpac-libgpac-0.4.4,1, already added
> pkg_add jpeg-6b_7.tbz
> pkg_add liba52-0.7.4_2.tbz
> skipping liba52-0.7.4_2, already added
> pkg_add libdvdread-0.9.7_3.tbz
> pkg_add libiconv-1.11_1.tbz
> skipping libiconv-1.11_1, already added
> pkg_add libmpeg2-0.5.1.tbz
> pkg_add libogg-1.1.3,4.tbz
> skipping libogg-1.1.3,4, already added
> pkg_add libtheora-1.0.b2.tbz
> skipping libtheora-1.0.b2, already added
> pkg_add libtool-1.5.26.tbz
> pkg_add libvorbis-1.2.0_2,3.tbz
> skipping libvorbis-1.2.0_2,3, already added
> pkg_add libxml2-2.6.32.tbz
> pkg_add pkg-config-0.23_1.tbz
> skipping pkg-config-0.23_1, already added
> pkg_add x264-0.0.20080409_2.tbz
> skipping x264-0.0.20080409_2, already added
> ===>   transcode-1.0.6_1 depends on executable: iconv - found
> ===>   transcode-1.0.6_1 depends on executable: gmake - found
> ===>   transcode-1.0.6_1 depends on file: /usr/local/bin/libtool - found
> ===>   transcode-1.0.6_1 depends on executable: pkg-config - found
> ===>   transcode-1.0.6_1 depends on shared library: dvdread.5 - found
> ===>   transcode-1.0.6_1 depends on shared library: jpeg.9 - found
> ===>   transcode-1.0.6_1 depends on shared library: mpeg2.0 - found
> ===>   transcode-1.0.6_1 depends on shared library: avcodec.1 - found
> ===>   transcode-1.0.6_1 depends on shared library: ogg.5 - found
> ===>   transcode-1.0.6_1 depends on shared library: vorbis.4 - found
> ===>   transcode-1.0.6_1 depends on shared library: theora.0 - found
> ===>   transcode-1.0.6_1 depends on shared library: a52.0 - found
> ===>   transcode-1.0.6_1 depends on shared library: xml2.5 - found
> ===>  Configuring for transcode-1.0.6_1
> checking build system type... amd64-portbld-freebsd6.3
> checking host system type... amd64-portbld-freebsd6.3
> checking target system type... amd64-portbld-freebsd6.3
> checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel
> checking whether build environment is sane... yes
> checking for a thread-safe mkdir -p... autotools/install-sh -c -d
> checking for gawk... no
> checking for mawk... no
> checking for nawk... nawk
> checking whether gmake sets $(MAKE)... yes
> checking whether to enable maintainer-specific portions of Makefiles... no
> checking for gcc... cc
> checking for C compiler default output file name... a.out
> checking whether the C compiler works... yes
> checking whether we are cross compiling... no
> checking for suffix of executables... 
> checking for suffix of object files... o
> checking whether we are using the GNU C compiler... yes
> checking whether cc accepts -g... yes
> checking for cc option to accept ISO C89... none needed
> checking for style of include used by gmake... GNU
> checking dependency style of cc... gcc3
> checking whether cc understands -c and -o together... yes
> checking how to run the C preprocessor... cc -E
> checking for grep that handles long lines and -e... /usr/bin/grep
> checking for egrep... /usr/bin/grep -E
> checking whether cc needs -traditional... no
> checking whether we are using the GNU C++ compiler... yes
> checking whether c++ accepts -g... yes
> checking dependency style of c++... gcc3
> checking for gawk... (cached) nawk
> checking how to run the C preprocessor... cc -E
> checking for a BSD-compatible install... /usr/bin/install -c -o root -g wheel
> checking whether ln -s works... yes
> checking whether gmake sets $(MAKE)... (cached) yes
> checking dependency style of cc... gcc3
> checking for gcc... (cached) cc
> checking whether we are using the GNU C compiler... (cached) yes
> checking whether cc accepts -g... (cached) yes
> checking for cc option to accept ISO C89... (cached) none needed
> checking dependency style of cc... (cached) gcc3
> checking for nawk... /usr/bin/nawk
> checking for dlopen in ... yes
> checking for dlopen... yes
> checking for ANSI C header files... yes
> checking for dirent.h that defines DIR... yes
> checking for library containing opendir... none required
> checking for sys/types.h... yes
> checking for sys/stat.h... yes
> checking for stdlib.h... yes
> checking for string.h... yes
> checking for memory.h... yes
> checking for strings.h... yes
> checking for inttypes.h... yes
> checking for stdint.h... yes
> checking for unistd.h... yes
> checking errno.h usability... yes
> checking errno.h presence... yes
> checking for errno.h... yes
> checking fcntl.h usability... yes
> checking fcntl.h presence... yes
> checking for fcntl.h... yes
> checking sys/time.h usability... yes
> checking sys/time.h presence... yes
> checking for sys/time.h... yes
> checking for unistd.h... (cached) yes
> checking limits.h usability... yes
> checking limits.h presence... yes
> checking for limits.h... yes
> checking for inttypes.h... (cached) yes
> checking malloc.h usability... no
> checking malloc.h presence... no
> checking for malloc.h... no
> checking alloca.h usability... no
> checking alloca.h presence... no
> checking for alloca.h... no
> checking for an ANSI C-conforming const... yes
> checking whether time.h and sys/time.h may both be included... yes
> checking for inline... inline
> checking for size_t... yes
> checking whether byte ordering is bigendian... no
> checking for off_t... yes
> checking __attribute__ ((aligned ())) support... 64
> checking for stdlib.h... (cached) yes
> checking for GNU libc compatible malloc... yes
> checking for working alloca.h... no
> checking for alloca... yes
> checking for vprintf... yes
> checking for _doprnt... no
> checking whether lstat dereferences a symlink specified with a trailing slash... no
> checking whether stat accepts an empty string... no
> checking for working strcoll... yes
> checking return type of signal handlers... void
> checking for strtol... yes
> checking for memalign... no
> checking for ftruncate... yes
> checking for gettimeofday... yes
> checking for memset... yes
> checking for strerror... yes
> checking for strncasecmp... yes
> checking for stat... yes
> checking for floor... no
> checking for atexit... yes
> checking for getpagesize... yes
> checking for memmove... yes
> checking for mkfifo... yes
> checking for vsscanf... yes
> checking for strptime... yes
> checking for alloca... no
> checking for strlcat... yes
> checking for strlcpy... yes
> checking for lrint in -lm... yes
> checking for getopt_long_only... yes
> checking whether support lib is needed... no
> checking for pthreads in -pthread... yes
> checking for build architecture... AMD64 architecture (AMD64)
> checking if $CC groks MMX inline assembly... yes
> checking for support of 3DNow in assembly code... yes
> checking if $CC groks SSE inline assembly... yes
> checking if $CC can handle SSE2 inline asm... yes
> checking if $CC groks AltiVec inline assembly... no
> checking if $CC groks AltiVec C extensions... no
> checking if linker needs -framework vecLib... 
> checking if cc supports -fomit-frame-pointer flags... yes
> checking for a sed that does not truncate output... /usr/bin/sed
> checking for ld used by cc... /usr/bin/ld
> checking if the linker (/usr/bin/ld) is GNU ld... yes
> checking for /usr/bin/ld option to reload object files... -r
> checking for BSD-compatible nm... /usr/bin/nm -B
> checking how to recognise dependent libraries... pass_all
> checking dlfcn.h usability... yes
> checking dlfcn.h presence... yes
> checking for dlfcn.h... yes
> checking how to run the C++ preprocessor... c++ -E
> checking for g77... no
> checking for xlf... no
> checking for f77... f77
> checking whether we are using the GNU Fortran 77 compiler... yes
> checking whether f77 accepts -g... yes
> checking the maximum length of command line arguments... (cached) 262144
> checking command to parse /usr/bin/nm -B output from cc object... ok
> checking for objdir... .libs
> checking for ar... ar
> checking for ranlib... ranlib
> checking for strip... strip
> checking if cc supports -fno-rtti -fno-exceptions... no
> checking for cc option to produce PIC... -fPIC
> checking if cc PIC flag -fPIC works... yes
> checking if cc static flag -static works... yes
> checking if cc supports -c -o file.o... yes
> checking whether the cc linker (/usr/bin/ld) supports shared libraries... yes
> checking whether -lc should be explicitly linked in... yes
> checking dynamic linker characteristics... freebsd6.3 ld.so
> checking how to hardcode library paths into programs... immediate
> checking whether stripping libraries is possible... yes
> checking for shl_load... no
> checking for shl_load in d... no
> checking for dlopen... (cached) yes
> checking whether a program can dlopen itself... yes
> checking whether a statically linked program can dlopen itself... no
> checking if libtool supports shared libraries... yes
> checking whether to build shared libraries... yes
> checking whether to build static libraries... no
> configure: creating libtool
> appending configuration tag "CXX" to libtool
> checking for ld used by c++... /usr/bin/ld
> checking if the linker (/usr/bin/ld) is GNU ld... yes
> checking whether the c++ linker (/usr/bin/ld) supports shared libraries... yes
> checking for c++ option to produce PIC... -fPIC
> checking if c++ PIC flag -fPIC works... yes
> checking if c++ static flag -static works... yes
> checking if c++ supports -c -o file.o... yes
> checking whether the c++ linker (/usr/bin/ld) supports shared libraries... yes
> checking dynamic linker characteristics... freebsd6.3 ld.so
> checking how to hardcode library paths into programs... immediate
> appending configuration tag "F77" to libtool
> checking if libtool supports shared libraries... yes
> checking whether to build shared libraries... yes
> checking whether to build static libraries... no
> checking for f77 option to produce PIC... -fPIC
> checking if f77 PIC flag -fPIC works... yes
> checking if f77 static flag -static works... yes
> checking if f77 supports -c -o file.o... yes
> checking whether the f77 linker (/usr/bin/ld) supports shared libraries... yes
> checking dynamic linker characteristics... freebsd6.3 ld.so
> checking how to hardcode library paths into programs... immediate
> checking if cc supports -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -fno-strict-aliasing -pipe flags... yes
> checking if c++ supports -O2 -fno-strict-aliasing -pipe -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 flags... yes
> checking if fast integers are available... yes
> checking for pkg-config... /usr/local/bin/pkg-config
> checking for X... no
> configure: WARNING: can not find X11
> checking for XvQueryExtension in -lXv... no
> checking X11/Xaw/Simple.h usability... no
> checking X11/Xaw/Simple.h presence... no
> checking for X11/Xaw/Simple.h... no
> checking for XpmFreeAttributes in -lXpm... no
> checking for gzopen in -lz... yes
> checking for sin in -lm... yes
> checking ffmpeg/avcodec.h usability... yes
> checking ffmpeg/avcodec.h presence... yes
> checking for ffmpeg/avcodec.h... yes
> checking libavcodec/avcodec.h usability... yes
> checking libavcodec/avcodec.h presence... yes
> checking for libavcodec/avcodec.h... yes
> checking for pkgconfig support for libavcodec... gnome-config: not found
> no
> checking how to determine LIBAVCODEC_CFLAGS... user
> checking how to determine LIBAVCODEC_LIBS... user
> checking for avcodec_thread_init in -lavcodec... no
> checking for pkgconfig support for libmpeg2... gnome-config: not found
> no
> checking how to determine LIBMPEG2_CFLAGS... default
> checking mpeg2dec/mpeg2.h usability... yes
> checking mpeg2dec/mpeg2.h presence... yes
> checking for mpeg2dec/mpeg2.h... yes
> checking how to determine LIBMPEG2_LIBS... default
> checking for mpeg2_init in -lmpeg2... yes
> checking for internal static framebuffer support... yes
> checking for network streaming support... no
> checking for internal NUV support... configure: WARNING: *** NUV format support on x86_64 is EXPERIMENTAL ***
> configure: WARNING: *** Be prepared for glitches and even crashes    ***
> yes
> checking whether v4l support is requested... no
> checking whether bktr support is requested... no
> checking whether sunau support is requested... no
> checking whether OSS support is requested... yes
> checking sys/soundcard.h usability... yes
> checking sys/soundcard.h presence... yes
> checking for sys/soundcard.h... yes
> checking decore.h usability... no
> checking decore.h presence... no
> checking for decore.h... no
> checking encore2.h usability... no
> checking encore2.h presence... no
> checking for encore2.h... no
> checking for default xvid... xvid4
> checking whether ibp and lors support is requested... no
> checking whether libpostproc support is requested... no
> checking whether freetype2 support is requested... no
> checking whether avifile support is requested... no
> checking whether lame support is requested... no
> checking whether ogg support is requested... yes
> checking for pkgconfig support for ogg... yes
> checking how to determine OGG_CFLAGS... pkg-config
> checking ogg/ogg.h usability... yes
> checking ogg/ogg.h presence... yes
> checking for ogg/ogg.h... yes
> checking how to determine OGG_LIBS... pkg-config
> checking for ogg_stream_init in -logg... yes
> checking whether vorbis support is requested... yes
> checking for pkgconfig support for vorbis... yes
> checking how to determine VORBIS_CFLAGS... pkg-config
> checking vorbis/codec.h usability... yes
> checking vorbis/codec.h presence... yes
> checking for vorbis/codec.h... yes
> checking how to determine VORBIS_LIBS... pkg-config
> checking for vorbis_info_init in -lvorbis... yes
> checking whether theora support is requested... yes
> checking for pkgconfig support for theora... yes
> checking for theora-config... no
> checking how to determine THEORA_CFLAGS... pkg-config
> checking theora/theora.h usability... yes
> checking theora/theora.h presence... yes
> checking for theora/theora.h... yes
> checking how to determine THEORA_LIBS... pkg-config
> checking for theora_info_init in -ltheora... yes
> checking whether libdvdread support is requested... yes
> checking for pkgconfig support for libdvdread... gnome-config: not found
> no
> checking how to determine LIBDVDREAD_CFLAGS... prefix
> checking how to determine LIBDVDREAD_LIBS... prefix
> checking for DVDOpen in -ldvdread... yes
> checking dvdread/dvd_reader.h usability... yes
> checking dvdread/dvd_reader.h presence... yes
> checking for dvdread/dvd_reader.h... yes
> checking whether pvm3 support is requested... no
> gnome-config: not found
> Package libdv was not found in the pkg-config search path.
> Perhaps you should add the directory containing `libdv.pc'
> to the PKG_CONFIG_PATH environment variable
> No package 'libdv' found
> checking whether libdv support is requested... no
> gnome-config: not found
> Package libquicktime was not found in the pkg-config search path.
> Perhaps you should add the directory containing `libquicktime.pc'
> to the PKG_CONFIG_PATH environment variable
> No package 'libquicktime' found
> checking whether libquicktime support is requested... no
> checking whether lzo support is requested... no
> checking whether a52 support is requested... yes
> checking for pkgconfig support for a52... gnome-config: not found
> no
> checking how to determine A52_CFLAGS... default
> checking a52dec/a52.h usability... yes
> checking a52dec/a52.h presence... yes
> checking for a52dec/a52.h... yes
> checking how to determine A52_LIBS... default
> checking for a52_init in -la52 ... yes
> checking for liba52 as default A52/AC3 decoder... yes
> gnome-config: not found
> Package libmpeg3 was not found in the pkg-config search path.
> Perhaps you should add the directory containing `libmpeg3.pc'
> to the PKG_CONFIG_PATH environment variable
> No package 'libmpeg3' found
> checking whether libmpeg3 support is requested... no
> checking whether libxml2 support is requested... yes
> checking for pkgconfig support for libxml2... yes
> checking for xml2-config... /usr/local/bin/xml2-config
> checking how to determine LIBXML2_CFLAGS... pkg-config
> checking libxml/parser.h usability... yes
> checking libxml/parser.h presence... yes
> checking for libxml/parser.h... yes
> checking how to determine LIBXML2_LIBS... pkg-config
> checking for xmlStrcmp in -lxml2... yes
> checking whether mjpegtools support is requested... no
> checking whether sdl support is requested... no
> checking whether libfame support is requested... no
> checking whether imagemagick support is requested... no
> checking whether libjpegmmx support is requested... no
> checking whether libjpeg support is requested... yes
> checking for pkgconfig support for libjpeg... gnome-config: not found
> no
> checking how to determine LIBJPEG_CFLAGS... default
> checking jpeglib.h usability... yes
> checking jpeglib.h presence... yes
> checking for jpeglib.h... yes
> checking how to determine LIBJPEG_LIBS... default
> checking for jpeg_CreateCompress in -ljpeg... yes
> checking whether bsdav support is requested... no
> checking whether iconv support is requested... yes
> checking for pkgconfig support for iconv... gnome-config: not found
> no
> checking how to determine ICONV_CFLAGS... default
> checking iconv.h usability... yes
> checking iconv.h presence... yes
> checking for iconv.h... yes
> checking how to determine ICONV_LIBS... default
> checking for iconv_open in -liconv... yes
> checking whether internal libxio support is requested... no
> checking if cc supports -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -fno-strict-aliasing -pipe flags... yes
> configure: creating ./config.status
> config.status: creating Makefile
> config.status: creating aclib/Makefile
> config.status: creating avilib/Makefile
> config.status: creating contrib/Makefile
> config.status: creating contrib/pnmpvn/Makefile
> config.status: creating docs/Makefile
> config.status: creating docs/html/Makefile
> config.status: creating docs/man/Makefile
> config.status: creating docs/release-notes/Makefile
> config.status: creating export/Makefile
> config.status: creating filter/Makefile
> config.status: creating filter/divxkey/Makefile
> config.status: creating filter/extsub/Makefile
> config.status: creating filter/pp/Makefile
> config.status: creating filter/preview/Makefile
> config.status: creating filter/subtitler/Makefile
> config.status: creating filter/tomsmocomp/Makefile
> config.status: creating filter/yuvdenoise/Makefile
> config.status: creating import/Makefile
> config.status: creating import/nuv/Makefile
> config.status: creating import/v4l/Makefile
> config.status: creating libac3/Makefile
> config.status: creating libdldarwin/Makefile
> config.status: creating libioaux/Makefile
> config.status: creating libsupport/Makefile
> config.status: creating libtc/Makefile
> config.status: creating libvo/Makefile
> config.status: creating libxio/Makefile
> config.status: creating pvm3/Makefile
> config.status: creating src/Makefile
> config.status: creating testsuite/Makefile
> config.status: creating tools/Makefile
> config.status: creating transcode.spec
> config.status: creating filter/parse_csv.awk
> config.status: creating filter/filter_list.awk
> config.status: creating config.h
> config.status: executing depfiles commands
> 
> ----------------------------------------
> Summary for transcode 1.0.6:
> ----------------------------------------
> 
> core options
> ----------------------------------------
> static AV-frame buffering      yes
> network (sockets) streams      no
> NUV format support             yes
> experimental xio               no
> Default xvid export            xvid4
> A52 default decoder            yes
> 
> libavcodec
> ----------------------------------------
> headers                        
> libraries                      
> build                          
> version                        
> statically linked              no
> 
> hardware support
> ----------------------------------------
> v4l/v4l2                       no
> OSS                            yes
> bktr                           no
> sunau                          no
> 
> optional package support
> ----------------------------------------
> IBP                            no
> X11                            no
> libmpeg2                       yes
> libpostproc                    no
> freetype2                      no
> avifile                        no
> lame                           no
> ogg                            yes
> vorbis                         yes
> theora                         yes
> libdvdread                     yes
> pvm3                           no
> libdv                          no
> libquicktime                   no
> lzo                            no
> a52                            yes
> libmpeg3                       no
> libxml2                        yes
> mjpegtools                     no
> sdl                            no
> libfame                        no
> imagemagick                    no
> libjpeg                        yes
> bsdav                          no
> iconv                          yes
> 
> ERROR: requirement failed: cannot link against libavcodec
> libavcodec can be found in the following packages:
>   FFmpeg  http://www.ffmpeg.org/
> 
> 
> Please see the INSTALL file in the top directory of the
> transcode sources for more information about building
> transcode with this configure script.
> 
> ===>  Script "configure" failed unexpectedly.
> Please report the problem to multimedia at FreeBSD.org [maintainer] and attach
> the "/work/a/ports/multimedia/transcode/work/transcode-1.0.6/config.log"
> including the output of the failure of your make command. Also, it might be
> a good idea to provide an overview of all packages installed on your system
> (e.g. an `ls /var/db/pkg`).
> *** Error code 1
> 
> Stop in /a/ports/multimedia/transcode.
> ================================================================
> build of /usr/ports/multimedia/transcode ended at Fri Aug 29 16:10:38 UTC 2008

-- 
Pav Lucistnik <pav at oook.cz>
              <pav at FreeBSD.org>
I can't do that, that would make sense.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 195 bytes
Desc: Toto je =?UTF-8?Q?digit=C3=A1ln=C4=9B?=
	=?ISO-8859-1?Q?_podepsan=E1?= =?UTF-8?Q?_=C4=8D=C3=A1st?=
	=?ISO-8859-1?Q?_zpr=E1vy?=
Url : http://lists.freebsd.org/pipermail/freebsd-multimedia/attachments/20080829/139421f7/attachment.pgp