pvr-xxx on 7.0

Tue Apr 8 14:21:16 UTC 2008

On Tue, Apr 8, 2008 at 7:14 AM, Jim Stapleton <stapleton.41 at gmail.com> wrote:
> On Tue, Apr 8, 2008 at 9:37 AM, Mike Tancsa <mike at sentex.net> wrote:
>
> >
>  > At 09:05 AM 4/8/2008, Jim Stapleton wrote:
>  >
>  > > I've seen a few posts about difficulties compiling/running pvrxxx on 7.0.
>  > >
>  > > Are there any instructions out there to do this succesfully? I've seen
>  > > both that I need the i2c bus patch, and I don't need the i2c bus
>  > > patch, for example. Is there anything more recent than the content in
>  > > the ports tree I should download for this port?
>  > >
>  >
>  >  Hi,
>  >         I had the same worries about moving to 7.x from 6.x. However, I
>  > found I just compiled the port and all works as well as it did with 6.x. I
>  > still have the odd time the card is not able to record after a week or two
>  > of use, but I saw the same things with RELENG_6.  unloading/reloading the
>  > klds fixes it and I just do that at 5am via cron since I dont record
>  > anything then. Its a fairly old card, so it could be a hardware / chipset
>  > bug.
>  >
>  >  Apr  8 05:05:15 cage kernel: cxm0: <Conexant iTVC15 MPEG Coder> mem
>  > 0xf8000000-0xfbffffff irq 21 at device 1.0 on pci3
>  >  Apr  8 05:05:15 cage kernel: cxm_iic0: <Conexant iTVC15 / iTVC16 I2C
>  > controller> on cxm0
>  >  Apr  8 05:05:15 cage kernel: iicbb0: <I2C bit-banging driver> on cxm_iic0
>  >  Apr  8 05:05:15 cage kernel: iicbus0: <Philips I2C bus> on iicbb0
>  > master-only
>  >  Apr  8 05:05:15 cage kernel: iicbus0: <unknown card> at addr 0
>  >  Apr  8 05:05:15 cage kernel: iicbus0: <unknown card> at addr 0
>  >  Apr  8 05:05:15 cage kernel: cxm0: Philips FM1236 tuner
>  >  Apr  8 05:05:15 cage kernel: cxm0: SAA7115 rev 1 video decoder
>  >  Apr  8 05:05:15 cage kernel: cxm0: MSP4448G-A2 audio decoder
>  >  Apr  8 05:05:15 cage kernel: cxm0: IR Remote
>  >  Apr  8 05:05:15 cage kernel: cxm0: [GIANT-LOCKED]
>  >  Apr  8 05:05:15 cage kernel: cxm0: [ITHREAD]
>  >  Apr  8 05:05:15 cage kernel: cxm0: encoder firmware version 0x2050032
>  >  Apr  8 05:05:15 cage kernel: cxm0: decoder firmware version 0x2020023
>  >
>  >  cxm0 at pci0:3:1:0:        class=0x040000 card=0x40000070 chip=0x08034444
>  > rev=0x01 hdr=0x00
>  >     vendor     = 'Conexant Inc (Was: Globespan, ICompression Inc)'
>  >     device     = 'iTVC15/CX23415 MPEG Codec'
>  >     class      = multimedia
>  >     subclass   = video
>  >     cap 01[44] = powerspec 2  supports D0 D3  current D0
>  >
>  >         ---Mike
>  >
>
>  Alright. I'm getting this error on compile:
>
>  ===>  Building for pvrxxx-20060822_1
>  cd /usr/ports/multimedia/pvrxxx/work/modules/cxm; make
>  ===> cxm (all)
>  Warning: Object directory not changed from original
>  /usr/ports/multimedia/pvrxxx/work/modules/cxm/cxm
>  @ -> /usr/src/sys
>  machine -> /usr/src/sys/i386/include
>  :> opt_cxm.h
>  awk -f @/tools/makeobjops.awk @/kern/bus_if.m -h
>  awk -f @/tools/makeobjops.awk @/kern/device_if.m -h
>  awk -f @/tools/makeobjops.awk @/dev/iicbus/iicbb_if.m -h
>  awk -f @/tools/makeobjops.awk @/dev/pci/pci_if.m -h
>  awk -f @/tools/vnode_if.awk @/kern/vnode_if.src -p
>  awk -f @/tools/vnode_if.awk @/kern/vnode_if.src -q
>  awk -f @/tools/vnode_if.awk @/kern/vnode_if.src -h
>  cc -O2 -fno-strict-aliasing -pipe  -D_KERNEL -DKLD_MODULE -std=c99
>  -nostdinc  -I../../.. -I. -I@ -I@/contrib/altq -finline-limit=8000
>  --param inlin
>  e-unit-growth=100 --param large-function-growth=1000 -fno-common
>  -mno-align-long-strings -mpreferred-stack-boundary=2  -mno-mmx
>  -mno-3dnow -mno-ss
>  e -mno-sse2 -mno-sse3 -ffreestanding -Wall -Wredundant-decls
>  -Wnested-externs -Wstrict-prototypes  -Wmissing-prototypes
>  -Wpointer-arith -Winline -W
>  cast-qual  -Wundef -Wno-pointer-sign -fformat-extensions -c
>  /usr/ports/multimedia/pvrxxx/work/modules/cxm/cxm/../../../dev/cxm/cxm.c
>  In file included from
>  /usr/ports/multimedia/pvrxxx/work/modules/cxm/cxm/../../../dev/cxm/cxm.c:86:
>  ../../../dev/cxm/cxm.h:224: error: array type has incomplete element type
>  In file included from ./v4l2_ioctl_hook.h:6,
>                  from
>  /usr/ports/multimedia/pvrxxx/work/modules/cxm/cxm/../../../dev/cxm/cxm.c:90:
>  ./fbsd-compat.h:62:23: error: inttypes.h: No such file or directory
>  /usr/ports/multimedia/pvrxxx/work/modules/cxm/cxm/../../../dev/cxm/cxm.c:
>  In function 'cxm_attach':
>  /usr/ports/multimedia/pvrxxx/work/modules/cxm/cxm/../../../dev/cxm/cxm.c:1914:
>  warning: passing argument 4 of 'bus_setup_intr' from incompatible po
>  inter type
>  /usr/ports/multimedia/pvrxxx/work/modules/cxm/cxm/../../../dev/cxm/cxm.c:1914:
>  warning: passing argument 5 of 'bus_setup_intr' from incompatible po
>  inter type
>  /usr/ports/multimedia/pvrxxx/work/modules/cxm/cxm/../../../dev/cxm/cxm.c:1914:
>  error: too few arguments to function 'bus_setup_intr'
>  *** Error code 1
>
>  Stop in /usr/ports/multimedia/pvrxxx/work/modules/cxm/cxm.
>  *** Error code 1
>
>  Stop in /usr/ports/multimedia/pvrxxx/work/modules/cxm.
>  *** Error code 1
>
>  Stop in /usr/ports/multimedia/pvrxxx.
>
>
>
>
>  I most likely forgot something. I downloaded the files from Hauppauge
>  (sp) web site, and copied the HcwMakoC.ROM to distfiles as
>  HcwMakoA.ROM, and copied the .sys file as well, not changing the name.
>  Any suggestions?
>
>
>
>  Thanks,
>  -Jim Stapleton

http://www.freebsd.org/cgi/getmsg.cgi?fetch=130899+134386+/usr/local/www/db/text/2008/freebsd-multimedia/20080330.freebsd-multimedia

the port from http://usleepless.110mb.com/pvrxxx_port.tgz automagically
downloads all the firmware stuff, but I believe you need to run "make makesum"
because the distinfo file is out of date.

-- 
The Mafia way is that we pursue larger goals under the guise of
personal relationships.
 Fisheye