6.2R && High Definition Audio

[Matthias Apitz]

El día Sunday, May 06, 2007 a las 11:20:51AM +0300, Abdullah Ibn Hamad Al-Marri escribió:

> On 5/6/07, Matthias Apitz <m.apitz at oclcpica.org> wrote:
> >El día Saturday, May 05, 2007 a las 05:23:32PM +0200, Matthias Apitz 
> >escribió:
> >
> >>
> >> Hello,
> >>
> >> I've some time to update the laptop of my wife. Is the chip
> >>
> >> none0 at pci0:27:0:        class=0x040300 card=0x107c1734 chip=0x26688086 
> >rev=0x04 hdr=0x00
> >>     vendor   = 'Intel Corporation'
> >>     device   = '82801FB/FR/FW/FRW Intel High DefiNition Audio Controller'
> >>
> >> now supported in 6.2R's snd_hda(4) or do I need some patch. I can't
> >> see anything about 6.2R in http://people.freebsd.org/~ariff/test/
> >> or should I go to some -STABLE? Thx
> >>
> >>       matthias
> >
> >I've Google'd around a bit and it seems that I should install
> >6.2-RELEASE and update the modules from
> >http://people.freebsd.org/~ariff/BINARY_MODULES/sndkld_releng6_i386_lowlatency.tar.gz (2007-Apr-26 14:54:40)
> >
> >I'm right? Thx
> >
> >        matthias
> 
> Hello Mathis,
> 
> Right :)

Hello Abdullah,

In the last days I updated to 6.2R and installed the above driver. It
worked as described out of the box. Thanks for the work you (and the others)
have done!

When KDE comes up and opens the /dev/dsp0.0 (I've put /dev/dsp0.0
as output in the Control Center), the mixer values
default to

$ mixer
Mixer vol      is currently set to   0:0
Mixer pcm      is currently set to 100:100
Mixer speaker  is currently set to   0:0
Mixer line     is currently set to   0:0
Mixer mic      is currently set to   0:0
Mixer rec      is currently set to   0:0

which does not play anything (for example not the greeting
dingle-dongle of KDE) while a good value would be

$ mixer
Mixer vol      is currently set to  24:24
Mixer pcm      is currently set to  34:34
Mixer speaker  is currently set to  28:28

So I've inserted a small shell script into ~/.kde/Autostart/mixer.sh
which sets the above values; don't know if this could be done on
some other way;

so far so good;

The only thing I can't get to work is 'xmms'. No audio comes out
and the volume in 'xmms' is set to zero and can't be changed.
Has someone a working .xmms/config file for snd_hda? Thx

	matthias
-- 
Matthias Apitz
Manager Technical Support - OCLC PICA GmbH
Gruenwalder Weg 28g - 82041 Oberhaching - Germany
t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211
e <m.apitz at oclcpica.org> - w http://www.oclcpica.org/ http://guru.UnixLand.de/
b http://gurucubano.blogspot.com/
OCLC PICA GmbH, Geschaeftsfuehrer: Christine Magin-Weeger, Norbert Weinberger
Sitz der Gesellschaft: Oberhaching, HRB Muenchen: 113261