Issue with new PVR-150

[Najiib Azad]

Mplayer crashes trying to open /dev/cxm0


Here is some data from my /var/log/message:
Jun  1 14:25:21 DiabloBSD kernel: <2>tda 0-0000: i2c
i/o error: rc == 2 (should be 4)
Jun  1 14:25:21 DiabloBSD kernel: before
tuner_command!
Jun  1 14:25:21 DiabloBSD kernel: tuner: tv freq set
to 61.25
Jun  1 14:25:21 DiabloBSD kernel: tuner: tv 0x06 0xb0
0x8e 0x01
Jun  1 14:25:40 DiabloBSD kernel: could not start iic
bus
Jun  1 14:25:40 DiabloBSD kernel: probed 54
Jun  1 14:25:40 DiabloBSD kernel: probed 136
Jun  1 14:25:40 DiabloBSD kernel: probed 160
Jun  1 14:25:40 DiabloBSD kernel: probed 194
Jun  1 14:25:40 DiabloBSD kernel: probed 224
Jun  1 14:25:40 DiabloBSD kernel: probed 226
Jun  1 14:25:40 DiabloBSD kernel: probed 228
Jun  1 14:25:40 DiabloBSD kernel: probed 230
Jun  1 14:25:40 DiabloBSD kernel: <2>tda 0-0000: i2c
i/o error: rc == 2 (should be 4)
Jun  1 14:25:40 DiabloBSD kernel: <2>cxm 0-0000: Video
signal:              present
Jun  1 14:25:40 DiabloBSD kernel: <2>cxm 0-0000:
Detected format:           NTSC-M
Jun  1 14:25:40 DiabloBSD kernel: <2>cxm 0-0000:
Detected audio mode:       mono
Jun  1 14:25:40 DiabloBSD kernel: <2>cxm 0-0000:
Detected audio standard:   BTSC
Jun  1 14:25:40 DiabloBSD kernel: <2>cxm 0-0000: Audio
muted:               yes
Jun  1 14:25:40 DiabloBSD kernel: <2>cxm 0-0000: Audio
microcontroller:     running
Jun  1 14:25:40 DiabloBSD kernel: <2>cxm 0-0000:
Configured audio standard: automatic detection
Jun  1 14:25:40 DiabloBSD kernel: <2>cxm 0-0000:
Configured audio system:   BTSC
Jun  1 14:25:40 DiabloBSD kernel: <2>cxm 0-0000:
Specified standard:        NTSC-M
Jun  1 14:25:40 DiabloBSD kernel: <2>cxm 0-0000:
Specified input:           Tuner
Jun  1 14:25:40 DiabloBSD kernel: <2>cxm 0-0000:
Specified audio input:     Tuner
Jun  1 14:25:40 DiabloBSD kernel: <2>cxm 0-0000:
Specified audioclock freq: 48 kHz
Jun  1 14:25:40 DiabloBSD kernel: <2>cxm 0-0000:
Preferred audio mode:      stereo
Jun  1 14:25:40 DiabloBSD kernel: cxm0: [FAST]
Jun  1 14:25:40 DiabloBSD kernel: cxm0: encoder
firmware version 0x2060039
Jun  1 14:27:58 DiabloBSD kernel: <3>cxm 0-0000:
720x576 is not a valid size!

and some data from my dmesg:

cxm0: <Conexant iTVC16 MPEG Coder> mem
0xec000000-0xefffffff irq 23 at device 11.0 on pci2
cxm_iic0: <Conexant iTVC15 / iTVC16 I2C controller> on
cxm0
iicbb0: <I2C bit-banging driver> on cxm_iic0
cxm0: Eeprom NTSC
tuner: type set to 50 (TCL 2002N) by cxm
<2>cxm 0-0000: Video signal:              present
<2>cxm 0-0000: Detected format:           NTSC-M
<2>cxm 0-0000: Detected audio mode:       mono
<2>cxm 0-0000: Detected audio standard:   BTSC
<2>cxm 0-0000: Audio muted:               yes
<2>cxm 0-0000: Audio microcontroller:     running
<2>cxm 0-0000: Configured audio standard: automatic
detection
<2>cxm 0-0000: Configured audio system:   BTSC
<2>cxm 0-0000: Specified standard:        NTSC-M
<2>cxm 0-0000: Specified input:           Tuner
<2>cxm 0-0000: Specified audio input:     Tuner
<2>cxm 0-0000: Specified audioclock freq: 48 kHz
<2>cxm 0-0000: Preferred audio mode:      stereo
cxm0: [FAST]
cxm0: encoder firmware version 0x2060039
<3>cxm 0-0000: 720x576 is not a valid size!
cxm_iic0: detached
cxm0: detached
cxm0: <Conexant iTVC16 MPEG Coder> mem
0xec000000-0xefffffff irq 23 at device 11.0 on pci2
cxm_iic0: <Conexant iTVC15 / iTVC16 I2C controller> on
cxm0
iicbb0: <I2C bit-banging driver> on cxm_iic0
cxm0: Eeprom NTSC
tuner: type set to 50 (TCL 2002N) by cxm
<2>cxm 0-0000: Video signal:              present
<2>cxm 0-0000: Detected format:           NTSC-M
<2>cxm 0-0000: Detected audio mode:       mono
<2>cxm 0-0000: Detected audio standard:   BTSC
<2>cxm 0-0000: Audio muted:               yes
<2>cxm 0-0000: Audio microcontroller:     running
<2>cxm 0-0000: Configured audio standard: automatic
detection
<2>cxm 0-0000: Configured audio system:   BTSC
<2>cxm 0-0000: Specified standard:        NTSC-M
<2>cxm 0-0000: Specified input:           Tuner
<2>cxm 0-0000: Specified audio input:     Tuner
<2>cxm 0-0000: Specified audioclock freq: 48 kHz
<2>cxm 0-0000: Preferred audio mode:      stereo
cxm0: [FAST]
cxm0: encoder firmware version 0x2060039
cxm_iic0: detached
cxm0: detached
cxm0: <Conexant iTVC16 MPEG Coder> mem
0xec000000-0xefffffff irq 23 at device 11.0 on pci2
cxm_iic0: <Conexant iTVC15 / iTVC16 I2C controller> on
cxm0
iicbb0: <I2C bit-banging driver> on cxm_iic0
cxm0: Eeprom NTSC
tuner: type set to 50 (TCL 2002N) by cxm
<2>cxm 0-0000: Video signal:              present
<2>cxm 0-0000: Detected format:           NTSC-M
<2>cxm 0-0000: Detected audio mode:       mono
<2>cxm 0-0000: Detected audio standard:   BTSC
<2>cxm 0-0000: Audio muted:               yes
<2>cxm 0-0000: Audio microcontroller:     running
<2>cxm 0-0000: Configured audio standard: automatic
detection
<2>cxm 0-0000: Configured audio system:   BTSC
<2>cxm 0-0000: Specified standard:        NTSC-M
<2>cxm 0-0000: Specified input:           Tuner
<2>cxm 0-0000: Specified audio input:     Tuner
<2>cxm 0-0000: Specified audioclock freq: 48 kHz
<2>cxm 0-0000: Preferred audio mode:      stereo
cxm0: [FAST]
cxm0: encoder firmware version 0x2060039
<3>cxm 0-0000: 720x576 is not a valid size!


when i cat /dev/cxm0 to mpeg i get this
www.ruinevil.com/freebsd/file.mpg



 
____________________________________________________________________________________
It's here! Your new message!  
Get new email alerts with the free Yahoo! Toolbar.
http://tools.search.yahoo.com/toolbar/features/mail/