HEADS UP: Last call for snd_hda(4) testers - High Definition Audio driver

Sun Jan 21 12:01:48 UTC 2007

Hello

I'm partly successfull in using the snd_hda driver.

It works from the console! It does not work in KDE at all. I do get 
sound from Thunderbird when recieving mail, running under KDE.

When I upgraded to FreeBSD 6.2-RELEASE and applied your patch 
(hda_releng6.diff), I also activated the built in sound(intel hda) on my 
motherboard (ASUS P5AD2 Premium). At the same time I removed my 
Soundblaster card.

Since I did this there's a problem with using KDM as login manager. When 
I write my password and hit the enter key the system reboots!!!!!

If I change to XDM there's no problem.
I do not know if these things relate to each other but I need to ask 
someone.

I'll attach the output from dmesg

Thanks for you help and time :-)

-- 
Med vänlig hälsning / With Regards / Mit freundlichen grüßen

___________________________________________________________________
Leslie Jensen
Liljegatan 26
SE-262 57 Ängelholm

Telephone +46 (0)431 19370      Celluarphone +46 (0)70 572 4457
Telephone work +46 (0)435 26621

This E-mail is sent from leslie at eskk.nu
using http://www.mozilla.com/thunderbird/
___________________________________________________________________
-------------- next part --------------
myk0: link up
drm0: <ATI Radeon RV380 X600> port 0xe000-0xe0ff mem 0xd8000000-0xdfffffff,0xd7fe0000-0xd7feffff irq 16 at device 0.0 on pci5
info: [drm] Initialized radeon 1.24.0 20060225
error: [drm:pid19863:radeon_do_init_cp] *ERROR* Cannot initialise DRM on this card
This card requires a new X.org DDX for 3D
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...8 8 4 4 1 1 0 0 0 done
All buffers synced.
Uptime: 9m26s
myk0: link down
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE #0: Sun Jan 21 10:51:01 CET 2007
    root at lesbsdpc.homenet.home:/usr/obj/usr/src/sys/CUSTOM
WARNING: Network stack Giant-free, but aio requires Giant.
    Consider adding 'options NET_WITH_GIANT' or setting debug.mpsafenet=0
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 3.40GHz (3412.09-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf34  Stepping = 4
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x441d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID,<b14>>
  Logical CPUs per core: 2
real memory  = 1073414144 (1023 MB)
avail memory = 1041203200 (992 MB)
ACPI APIC Table: <A M I  OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
kqemu version 0x00010300
kqemu: KQEMU installed, max_locked_mem=519756kB.
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <A M I OEMXSDT> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
cpu1: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci5: <ACPI PCI bus> on pcib1
pci5: <display, VGA> at device 0.0 (no driver attached)
pci5: <display> at device 0.1 (no driver attached)
pcm0: <Intel 82801F High Definition Audio Controller> mem 0xd7bf4000-0xd7bf7fff irq 16 at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci4: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib3
myk0: <Marvell 88E8053 Gigabit Ethernet Controller, Ver. 8.12.2.3> port 0xc800-0xc8ff mem 0xd7efc000-0xd7efffff irq 17 at device 0.0 on pci3
myk0: Ethernet address: 00:11:2f:4a:fe:9e
pcib4: <ACPI PCI-PCI bridge> at device 28.2 on pci0
pci2: <ACPI PCI bus> on pcib4
myk1: <Marvell 88E8053 Gigabit Ethernet Controller, Ver. 8.12.2.3> port 0xb800-0xb8ff mem 0xd7dfc000-0xd7dfffff irq 18 at device 0.0 on pci2
myk1: Ethernet address: 00:11:2f:4b:04:dc
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0x8880-0x889f irq 23 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0x8c00-0x8c1f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0x9000-0x901f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0x9080-0x909f irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 0xd7bff800-0xd7bffbff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801FB (ICH6) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib5
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xa800-0xa8ff mem 0xd7cff000-0xd7cfffff irq 21 at device 10.0 on pci1
ahc0: [GIANT-LOCKED]
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH6 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <Intel ICH6 SATA150 controller> port 0x9c00-0x9c07,0x9880-0x9883,0x9800-0x9807,0x9480-0x9483,0x9400-0x940f mem 0xd7bffc00-0xd7bfffff irq 19 at device 31.2 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xccfff,0xcd000-0xcd7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ulpt0: hp deskjet 5600, rev 2.00/1.00, addr 2, iclass 7/1
ulpt0: using bi-directional mode
ums0: Logitech USB Receiver, rev 1.10/9.10, addr 3, iclass 3/1
ums0: 5 buttons and Z dir.
Timecounters tick every 1.000 msec
acd0: DVDR <NEC DVD RW ND-3500AG/2.16> at ata0-master UDMA33
ad4: 238475MB <SAMSUNG SP2504C VT100-33> at ata2-master SATA150
ad5: 286188MB <Maxtor 6B300S0 BANC1G10> at ata2-slave SATA150
Waiting 5 seconds for SCSI devices to settle
pcm0: <HDA Codec: CMedia CMI9880>
pcm0: <HDA Driver Revision: 20061017_0033>
sa0 at ahc0 bus 0 target 6 lun 0
sa0: <ARCHIVE Python 06408-XXX 825B> Removable Sequential Access SCSI-3 device 
sa0: 20.000MB/s transfers (10.000MHz, offset 8, 16bit)
SMP: AP CPU #1 Launched!
cd0 at ata0 bus 0 target 0 lun 0
cd0: <_NEC DVD_RW ND-3500AG 2.16> Removable CD-ROM SCSI-0 device 
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad4s1a
myk0: link up
drm0: <ATI Radeon RV380 X600> port 0xe000-0xe0ff mem 0xd8000000-0xdfffffff,0xd7fe0000-0xd7feffff irq 16 at device 0.0 on pci5
info: [drm] Initialized radeon 1.24.0 20060225
error: [drm:pid964:radeon_do_init_cp] *ERROR* Cannot initialise DRM on this card
This card requires a new X.org DDX for 3D
ulpt0: at uhub1 port 1 (addr 2) disconnected
ulpt0: detached
ulpt0: hp deskjet 5600, rev 2.00/1.00, addr 2, iclass 7/1
ulpt0: using bi-directional mode