microphone doen't work:(

Eugeny Kuzakov coredumped at coredumped.org.ru
Tue Jul 11 17:17:33 UTC 2006


On 7/10/06, Yuriy Tsibizov <Yuriy.Tsibizov at gfk.ru> wrote:
>
> >    I have Audigy 4 card inserted in Asus p4p800se.
> >    sound is nice, but I am unable to use microphone in any app...:(
> can you post output from "emuctrl list" and "mixer"?
>


coredumped at coredumped:~$sudo emuctrl  list
Id      Description               Vol   RecVol
FX (PCM) buses
fx0     DSP FX BUS 0             61:61  (100:100)
DSP Inputs
in0     AC97 Codec              100:100 (100:100)
in2     S/PDIF                    0:0   (0:0)
DSP Outputs
out0    Front                   100:100
out1    Center                  100
out2    Subwoofer               100
out4    Rear                    100:100
out13   A/D converter (REC)       0:0
Main Mix
mix0    Main Mix                100:100 (100:100)
---11-07-2006 21:06:44
coredumped at coredumped:~$mixer
Mixer vol      is currently set to 100:100
Mixer pcm      is currently set to  60:60
Mixer speaker  is currently set to 100:100
Mixer line     is currently set to 100:100
Mixer mic      is currently set to 100:100
Mixer cd       is currently set to   0:0
Mixer rec      is currently set to 100:100
Mixer igain    is currently set to  98:98
Mixer ogain    is currently set to 100:100
Mixer line1    is currently set to  73:73
Mixer phin     is currently set to   0:0
Mixer phout    is currently set to   0:0
Mixer video    is currently set to   0:0
Recording source: mic


dmesg:
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
    The Regents of the University of California. All rights reserved.
FreeBSD 6.1-STABLE #1: Sat Jul  8 16:41:59 MSD 2006
    root at coredumped.local:/add/obj/add/ftp/pub/FreeBSD/STABLE/src/sys/my2
WARNING: debug.mpsafenet forced to 0 as ipsec requires Giant
WARNING: MPSAFE network stack disabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz (3519.69-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf34  Stepping = 4

Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x441d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID,<b14>>
  Logical CPUs per core: 2
real memory  = 1073414144 (1023 MB)
avail memory = 1036935168 (988 MB)
ACPI APIC Table: <A M I  OEMAPIC >
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <A M I OEMXSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82865 host to AGP bridge> mem 0xe0000000-0xefffffff at device
0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
nvidia0: <GeForce 6800 GT> mem
0xfd000000-0xfdffffff,0xc0000000-0xcfffffff,0xfc000000-0xfcffffff at device
0.0 on pci1
nvidia0: [GIANT-LOCKED]
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xeec0-0xeedf irq 16
at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xef00-0xef1f irq 19
at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xef20-0xef3f irq 18
at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xef40-0xef5f irq 16
at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801EB/R (ICH5) USB 2.0 controller> mem 0xfebff800-0xfebffbff
irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: waiting for BIOS to give up control
usb4: timed out waiting for BIOS
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801EB/R (ICH5) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
uhub5: vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/6.0b, addr 2
uhub5: single transaction translator
uhub5: 4 ports with 4 removable, self powered
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/22.00, addr 3, iclass 3/1
ums0: 8 buttons and Z dir.
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
skc0: <Marvell Gigabit Ethernet> port 0xd800-0xd8ff mem
0xfeafc000-0xfeafffff irq 22 at device 5.0 on pci2
skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9)
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
sk0: Ethernet address: 00:13:d4:63:5e:24
miibus0: <MII bus> on sk0
e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0
e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX,
auto
skc0: [GIANT-LOCKED]
fwohci0: <VIA Fire II (VT6306)> port 0xdc00-0xdc7f mem 0xfeafb800-0xfeafbfff
irq 21 at device 9.0 on pci2
fwohci0: [GIANT-LOCKED]
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:0a:48:00:00:00:05:12
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:0a:48:00:05:12
fwe0: Ethernet address: 02:0a:48:00:05:12
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
atapci0: <SiI 3112 SATA150 controller> port
0xdff0-0xdff7,0xdfe4-0xdfe7,0xdfa8-0xdfaf,0xdfe0-0xdfe3,0xdf90-0xdf9f mem
0xfeafb400-0xfeafb5ff irq 22 at device 10.0 on pci2
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
emu10kx0: <Creative Audigy 2 Value (Unknown model) [SB????]> port
0xdf00-0xdf3f irq 23 at device 11.0 on pci2
pcm0: <EMU10Kx PCM Interface> on emu10kx0
pcm0: <SigmaTel STAC9750/51 AC97 Codec>
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH5 UDMA100 controller> port
0xeff0-0xeff7,0xefe4-0xefe7,0xefa8-0xefaf,0xefe0-0xefe3,0xef90-0xef9f irq 18
at device 31.1 on pci0
ata4: <ATA channel 0> on atapci1
ata5: <ATA channel 1> on atapci1
atapci2: <Intel ICH5 SATA150 controller> port
0xefa0-0xefa7,0xef8c-0xef8f,0xef80-0xef87,0xef88-0xef8b,0xef60-0xef6f irq 18
at device 31.2 on pci0
ata6: <ATA channel 0> on atapci2
ata7: <ATA channel 1> on atapci2
ichsmb0: <Intel 82801EB (ICH5) SMBus controller> port 0x400-0x41f irq 17 at
device 31.3 on pci0
ichsmb0: [GIANT-LOCKED]
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
speaker0: <PC speaker> port 0x61 on acpi0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3
on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xce7ff,0xce800-0xd2fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
ukbd0: BTC USB Multimedia Cordless Kit, rev 1.10/1.70, addr 2, iclass 3/1
kbd2 at ukbd0
uhid0: BTC USB Multimedia Cordless Kit, rev 1.10/1.70, addr 2, iclass 3/1
ugen0: vendor 0x046d Camera, rev 1.10/0.00, addr 2
ubt0: vendor 0x0db0 product 0x1967, rev 1.10/5.25, addr 2
ubt0: vendor 0x0db0 product 0x1967, rev 1.10/5.25, addr 2
ubt0: Interface 0 endpoints: interrupt=0x81, bulk-in=0x82, bulk-out=0x2
ubt0: Interface 1 (alt.config 5) endpoints: isoc-in=0x83, isoc-out=0x3;
wMaxPacketSize=49; nframes=6, buffer size=294
Timecounter "TSC" frequency 3519686464 Hz quality 800
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
ad4: 305245MB <WDC WD3200JS-00PDB0 21.00M21> at ata2-master SATA150
ad6: 286188MB <Maxtor 7V300F0 VA111630> at ata3-master SATA150
ad8: 114473MB <Seagate ST3120814A 3.AAD> at ata4-master UDMA100
ad9: 19092MB <Seagate ST320011A 7.18> at ata4-slave UDMA100
acd0: DVDR <NEC DVD RW ND-3500AG/2.16> at ata5-slave PIO4
ad12: 152627MB <Seagate ST3160023AS 3.18> at ata6-master SATA150
GEOM_LABEL: Label for provider ad8s1 is msdosfs/OT.
GEOM_LABEL: Label for provider ad9s1 is ufs/otadd2.
GEOM_LABEL: Label for provider ad12s1 is ntfs/ntfs.
GEOM_LABEL: Label for provider ad12s4a is ufs/add.
cd0 at ata5 bus 0 target 1 lun 0
cd0: <_NEC DVD_RW ND-3500AG 2.16> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad12s2a
emu10kx0: IR MIDI events enabled.
sk0: promiscuous mode enabled
fuse4bsd: version 0.3.0, FUSE ABI 7.5
vmmon: Module vmmon: registered with major=200 minor=0 tag=$Name: build-570
(3.2.x mvm) $
vmmon: Module vmmon: initialized
vmnet1: Ethernet address: 00:bd:81:fc:03:01
vmnet1: promiscuous mode enabled

---11-07-2006 21:06:45

-- 
Best wishes, Coredumped.


More information about the freebsd-multimedia mailing list