Problem on snd_ich module
Alexander Leidinger
Alexander at Leidinger.net
Wed Feb 22 10:16:11 PST 2006
Am Wed, 22 Feb 2006 15:58:32 +0700
schrieb "Angka H. K." <harikurniawan at gmail.com>:
> My card is recognized as Intel ICH 6 and using conexant ac 97 codec. Here is my pciconf -lv output
>
> pcm0 at pci0:30:2: class=0x040100 card=0x3080103c chip=0x266e8086 rev=0x03 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801FB/FR/FW/FRW AC '97 Audio Controller'
> class = multimedia
> subclass = audio
>
> My problem is:
> When module snd_ich loaded my system becoming very slow.
>
> From the "top" command i get the"CPU states:" for the interrupt is high, up to 80%
> It's not happen when using 5.x but the codec known as unknown.
Sounds like an interrupt conflict (but it doesn't have to be one). Have
a look at the output of "dmesg" and look out for the numbers behind
"irq". If you find a device which has the same irq than the soundcard,
try to disable this device and have a look if there's still such a high
load.
Bye,
Alexander.
--
http://www.Leidinger.net Alexander @ Leidinger.net
GPG fingerprint = C518 BC70 E67F 143F BE91 3365 79E2 9C60 B006 3FE7
WL http://www.amazon.de/exec/obidos/registry/1FZ4DTHQE9PQ8/ref=wl_em_to/
More information about the freebsd-multimedia
mailing list