Patch for pvr250/350 (switch between profiles)

[Lluis López]

Other fail. Don't accept my attach. Last probe attached tar.gz
Sorry for the "spam".
Regards, Luis López Solé.


On Mon, 14 Feb 2005 11:59:41 +0100, Lluis López <cronopiolopez at gmail.com> wrote:
> Well, in the las mail only the two fist files are attached (two next here).
> Sorry I hope no more fails ;)
> 
> 
> On Mon, 14 Feb 2005 11:53:42 +0100, Lluis López <cronopiolopez at gmail.com> wrote:
> > I see that in my last mail some long lines in enclosed files are
> > cutted. This produce fails in patching. I attached the same files in
> > this mail. If somebody have any  patch problem (and is interesed) i
> > send this files in person.
> > The instructions are de same (see bellow) that the last mail but files
> > aren't enclosed, are attached (patch_cxm_c,
> > patch_modules_cxm_cxm_Makefile, ioctl_meteor_compat.c and
> > pvr250-setprofile.c).
> > NOTE: If make clean fails rm -rf work/ and starts again.
> >
> > Regards, Luis López Solé.
> >
> > On Mon, 14 Feb 2005 03:54:51 +0100, Lluis López <cronopiolopez at gmail.com> wrote:
> > > Sorry for duplicate (no subject in last mail).
> > > The application setsize allows switch between 3 profiles (determined
> > > for format size). Next patch allows switch between 8 profiles using
> > > hardware ioctl's.
> > >
> > > NOTE: Values for profiles are select for me,  I'm not an expert, if
> > > somebody have more knowledge (or datasheet of chip) change source it's
> > > easy (feeback is always welcome and copy of datasheet too). For
> > > exemple the TS profile don't playback well, some losses in audio and
> > > video (grab work without aparent problem), but i suposse it's very
> > > useful for streaming machines. Other example is MPEG1 profile: don't
> > > playback well, his values are selected for works with dvdauthor (only
> > > accept 48 Khz audio streams), economize time in work encoding process.
> > > Or MPEG2 profile select for best quality without losses with mplayer
> > > playback (with -cache 8192, of course).
> > >
> > > For apply this patch follow next steps:
> > > 1.-
> > > #cd /usr/ports/multimedia/pvr250/ && make clean && make extract
> > > 2.-
> > > Copy the enclosed files (see bellow)  pvr250-setprofile, patch_cxm_c
> > > and  patch_modules_cxm_cxm_Makefile in work/ and ioctl_meteor_compat.h
> > > in work/dev/cxm/
> > > 3.-
> > > Apply the patches:
> > > #patch < work/patch_cxm_c && patch <work/patch_modules_cxm_cxm_Makefile
> > > 4.-
> > > Compile with:
> > > #make
> > >
> > > copy:
> > > #cp work/modules/cxm/*/*.ko /boot/kernel/
> > >
> > > and unload modules & load new modules:
> > > # kldunload cxm
> > > # kldunload cxm_iic
> > > # kldload cxm_iic
> > > # kldload cxm
> > > NOTE: Select a channel the application pvr250-setprofile allows change
> > > profile in cold or wih channel running, but don't initialize the
> > > device.
> > > 5.-
> > > compille pvr250-setprofile:
> > > #cc -o /usr/local/bin/pvr250-setprofile work/pvr250-setprofile.c
> > > 6.-
> > > Enjoy.
> > > Regards, Luis López Solé.
> > >
> > > LAST NOTE: Only tested in RELEGN_5 (compiled last weekend).
> >
> >
> >
> 
> 
>