Haupauge WinTV PVR250
Andreas Dahlén
andreas at dahlen.ws
Tue Mar 16 23:20:20 PST 2004
Hi,
I've got some further information that may help solving the problem.
To test my installation I downloaded the Linux-distribution KnoppMyth
(http://mysettopbox.tv/knoppmyth.html) and installed it. After some
tweaking of the configfiles I got the card to work.
When loading the ivtv-drivers (http://ivtv.sourceforge.net) I get the
following information about the card:
tvee: Hauppauge: model=32034, rev=B148, serial#=6960535
tvee: tuner=LG TP18PSB11D (idx=48, type=29)
tvee: tuner fmt=PAL(B/G) (eeprom=0x04, v4l2=0x00000007)
tvee: audio_processor=MSP3415 (type=6)
The cxm-driver in FreeBSD reports the card as type=0x30. The ivtv-driver
reports the card as type=29. I guesss that these values should be the
same? Could it be the extraction of the firmware that differs?
When looking through the code for the cxm-driver LG-tuners isn't
mentioned anywhere. I guess that they should be added, but I don't know
enough of the drivers/tuner to do the modification. Can anyone give me
som information on what I need to change?
/Andreas
-----Original Message-----
From: owner-freebsd-multimedia at freebsd.org
[mailto:owner-freebsd-multimedia at freebsd.org] On Behalf Of Andreas
Dahlén
Sent: den 15 mars 2004 13:44
To: freebsd-multimedia at freebsd.org
Subject: Haupauge WinTV PVR250
Hi!
Ive just bought a Haupauge WinTV PVR250 and installed it in my machin e
running FreeBSD 4.9
I followed the instructions from John in
http://docs.freebsd.org/cgi/getmsg.cgi?fetch=85121+0+/usr/local/www/db/t
ext/2004/freebsd-multimedia/20040208.freebsd-multimedia and also found
the problem that Christoph
(http://lists.freebsd.org/pipermail/freebsd-multimedia/2004-February/000
840.html) had.
When I run the following commands;
kldload cxm_iic
kldload_cxm
I get the following
cxm0: <Conexant iTVC16 MPEG Coder> mem 0xdc000000-0xdfffffff irq 10 at
device 11.0 on pci0
cxm_iic0: <Conexant iTVC15 / iTVC16 I2C controller> on cxm0
iicbb0: <I2C bit-banging driver> on cxm_iic0
iicbus0: <Philips I2C bus> on iicbb0 master-only
cxm0: unknown tuner code 0x30
cxm0: could not initialize tuner
iicbus0: detached
iicbb0: detached
cxm_iic0: detached
device_probe_and_attach: cxm0 attach returned 6
lspci v
00:0b.0 Multimedia video controller: Internext Compression Inc: Unknown
device 0016 (rev 01)
Subsystem: Hauppauge computer works Inc.: Unknown device 4009
Flags: bus master, medium devsel, latency 32, IRQ 10
Memory at dc000000 (32-bit, prefetchable)
Capabilities: [44] Power Management version 2
pciconf -lv
none1 at pci0:11:0: class=0x040000 card=0x40090070 chip=0x00164444
rev=0x01 hdr=0x00
vendor = 'Conexant Inc (Was: Globespan, ICompression Inc)'
class = multimedia
subclass = video
Ive looked at the components of the card and found the following;
Card: Hauppauge PVR250 model 986 (according to package)
Model 32034, PAL B/G, rev. B148 (according to card)
Tuner: LG TP18PSB11D
MPEG 2 enc: Conexant CD23416-12
Sound encoder: MSP 3215G
Assembeled: Week 47, 2003
I guess that the drivers arent updated to handle this new card. Does
anyone (John?) have some hints what I should do modify the drivers to
work?
/Andreas
_______________________________________________
freebsd-multimedia at freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia
To unsubscribe, send any mail to
"freebsd-multimedia-unsubscribe at freebsd.org"
More information about the freebsd-multimedia
mailing list