Linux port of the Brooktree Soundchip drivers

[Alexander Langer]

Thus spake Ulrich Spoerlein (q at uni.de):
> Yes, I did look at the specs and in theory, the "old" bktr should just
> work. After hours of fiddeling I just took the FM Tuner initialization
> (because that worked) and well, it worked for TV too.

Well, I disagree a bit.  The specs for the MSP3415 I have here describe
the autodetection routine totally different from what is done in source.

> Take a look at Steve O'Hara-Smith's email. These steps are necessary for
> the patch to work on -STABLE.

Yes, bogon by me, which I didn't even notice *sigh*

> For me, the patch works just fine, this is dmesg:

> bktr0: Hauppauge Model 44354 C221
> bktr0: Detected a MSP3415D-B3 at 0x80
> bktr0: Hauppauge WinCast/TV, Philips FR1216 PAL FM tuner, msp3400c
> stereo, remote control.
> msp34xx: setvolume: mute=off 0:0  v=0x00 b=0x00
> msp3400: setmode: 0

Try this now (with bootverbose = 1), it should work much better.

> pci0: <unknown card> (vendor=0x109e, dev=0x0878) at 11.1 irq 7
> While you're at it, any chance to get the Remote Control for this card
> working? ;]

My remote always has worked with Fxtv with this card:
bktr0: <BrookTree 878> mem 0xed000000-0xed000fff irq 9 at device 16.0 on pci0
bktr0: Hauppauge Model 61344 D421
bktr0: Detected a MSP3415D-B3 at 0x80
bktr0: Hauppauge WinCast/TV, Philips FR1216 PAL FM tuner, msp3400c
stereo, remote control.

(well, last time I actually used it was in 2000, though, and now my
batteries are empty, so I can't test again ;-)

Alex