bge and wpi do not function on aspire 5920
Mario Pavlov
freebsd at abv.bg
Thu May 15 18:39:07 UTC 2008
> >On Wed, May 14, 2008 at 1:59 PM, Mario Pavlov <freebsd at abv.bg> wrote:
> >>
> >> of course
> >> here is it
> >> this is after booting in verbose logging mode and then kldload if_wpi
> >>
> >
> >...
> >
> >> pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
> >> pcib3: domain 0
> >> pcib3: secondary bus 8
> >> pcib3: subordinate bus 8
> >> pcib3: I/O decode 0x0-0x0
> >> pcib3: no prefetched decode
> >
> >This bridge is completely closed.
> >
> >> pci8: <ACPI PCI bus> on pcib3
> >> pci8: domain=0, physical bus=8
> >> found-> vendor=0x14e4, dev=0x1693, revid=0x02
> >> domain=0, bus=8, slot=0, func=0
> >> class=02-00-00, hdrtype=0x00, mfdev=0
> >> cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
> >> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> >> intpin=a, irq=10
> >> powerspec 3 supports D0 D3 current D0
> >> MSI supports 1 message, 64 bit
> >> map[10]: type Memory, range 64, base 0, size 16, memory disabled
> >
> >Since your bge(4) is on pcib3.pci8, even if its IO memory is not
> >disabled, it will not work. Your wpi(4) suffers same problem.
> >
> >> pcib3: matched entry for 8.0.INTA
> >> pcib3: slot 0 INTA hardwired to IRQ 17
> >> bge0: <Broadcom NetLink Gigabit Ethernet Controller, ASIC rev. 0xb002> irq 17 at device 0.0 on pci8
> >> pcib3: bge0 requested unsupported memory range 0-0xffffffffffffffff (decoding 0-0, 0-0)
> >> bge0: 0x10000 bytes of rid 0x10 res 3 failed (0, 0xffffffffffffffff).
> >> bge0: couldn't map memory
> >> device_attach: bge0 attach returned 6
> >>
> >>
> >> where do you think is the problem ?
> >> ACPI or the drivers
> >
> >Nothing is related to bge or wpi drivers. Try finding something like
> >"pnp os" in your bios setting, and disable it.
> >
> >Best Regards,
> >sephe
> >
> >--
> >Live Free or Die
>
>Hi
>thank you for response
>I have no such option in the BIOS, in fact there are very few options in there...
>what can I do in this case ?
>
>I've also tried these devices on a few OSs
>OpenSolaris 10:
>Broadcom netlink chips officially not supported
>Intel PRO/wireless 3945ABG is recognized using wpi driver but it doesn't work
>it can never find or connect to any network (it might be so because I'm too lame to make it work)
>
>Linux 2.6:
>Broadcom netlink chip -> works
>Intel PRO/wireless 3945ABG -> same as on Solaris but using the linux driver
>
>windows vista:
>both work
Hi again
I've been trying to understand the problem, but I'm still not sure...
here is even more verbose output of the boot process:
ACPI set debug layer 'ACPI_ALL_DRIVERS' level 'ACPI_LV_VERBOSE'
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-STABLE #1: Tue May 13 21:11:58 EEST 2008
root@:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80be7000.
Calibrating clock(s) ... i8254 clock: 1193165 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1833477448 Hz
CPU: Intel(R) Core(TM)2 Duo CPU T5550 @ 1.83GHz (1833.48-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x6fd Stepping = 13
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe39d<SSE3,RSVD2,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
usable memory = 2124967936 (2026 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages)
0x0000000000ce4000 - 0x000000007bac4fff, 2061373440 bytes (503265 pages)
avail memory = 2050576384 (1955 MB)
ACPI APIC Table: <INTEL CRESTLNE>
INTR: Adding local APIC 1 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 1
ULE: setup cpu group 0
ULE: setup cpu 0
ULE: adding cpu 0 to group 0: cpus 1 mask 0x1
ULE: setup cpu group 1
ULE: setup cpu 1
ULE: adding cpu 1 to group 1: cpus 1 mask 0x2
ACPI: RSDP @ 0x0xf7ae0/0x0024 (v 2 PTLTD )
ACPI: XSDT @ 0x0x7f6d2ef1/0x0084 (v 1 ACRSYS ACRPRDCT 0x06040000 LTP 0x00000000)
ACPI: FACP @ 0x0x7f6ddc2a/0x00F4 (v 3 INTEL CRESTLNE 0x06040000 ALAN 0x00000001)
ACPI: DSDT @ 0x0x7f6d4db5/0x8E01 (v 2 INTEL CRESTLNE 0x06040000 MSFT 0x03000001)
ACPI: FACS @ 0x0x7f6e0fc0/0x0040
ACPI: APIC @ 0x0x7f6ddd1e/0x0068 (v 1 INTEL CRESTLNE 0x06040000 LOHR 0x0000005A)
ACPI: HPET @ 0x0x7f6ddd86/0x0038 (v 1 INTEL CRESTLNE 0x06040000 LOHR 0x0000005A)
ACPI: MCFG @ 0x0x7f6dddbe/0x003C (v 1 INTEL CRESTLNE 0x06040000 LOHR 0x0000005A)
ACPI: APIC @ 0x0x7f6dddfa/0x0068 (v 1 PTLTD APIC 0x06040000 LTP 0x00000000)
ACPI: BOOT @ 0x0x7f6dde62/0x0028 (v 1 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001)
ACPI: SLIC @ 0x0x7f6dde8a/0x0176 (v 1 ACRSYS ACRPRDCT 0x06040000 acer 0x00000000)
ACPI: SSDT @ 0x0x7f6d4766/0x064F (v 1 SataRe SataPri 0x00001000 INTL 0x20050624)
ACPI: SSDT @ 0x0x7f6d40ca/0x069C (v 1 SataRe SataSec 0x00001000 INTL 0x20050624)
ACPI: SSDT @ 0x0x7f6d3531/0x025F (v 1 PmRef Cpu0Tst 0x00003000 INTL 0x20050624)
ACPI: SSDT @ 0x0x7f6d348b/0x00A6 (v 1 PmRef Cpu1Tst 0x00003000 INTL 0x20050624)
ACPI: SSDT @ 0x0x7f6d2f75/0x0516 (v 1 PmRef CpuPm 0x00003000 INTL 0x20050624)
MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 1
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00000200 err: 0x00010000 pcm: 0x00010000
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
wlan_amrr: <AMRR Transmit Rate Control Algorithm>
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
io: <I/O>
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (May 13 2008 21:11:49)
acpi0: <ACRSYS ACRPRDCT> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.MCHC.HBUS -> bus 0 dev 0 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.LPCB.LPC0 -> bus 0 dev 31 func 0
unknown: I/O range not supported
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: vend: 0x8086 rev: 0x1 num: 2 hz: 14318180 opts: legacy_route 64-bit
Timecounter "HPET" frequency 14318180 Hz quality 900
ACPI timer: 1/1 1/1 1/2 1/2 1/1 1/1 1/1 1/2 1/2 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x18> port 0x62,0x66 on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 1 3 4 5 6 7 10 12 14 15
Validation 0 5 N 0 1 3 4 5 6 7 10 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 1 3 4 5 6 7 11 12 14 15
Validation 0 255 N 0 1 3 4 5 6 7 11 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 1 3 4 5 6 7 10 12 14 15
Validation 0 10 N 0 1 3 4 5 6 7 10 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 1 3 4 5 6 7 11 12 14 15
Validation 0 255 N 0 1 3 4 5 6 7 11 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 1 3 4 5 6 7 10 12 14 15
Validation 0 255 N 0 1 3 4 5 6 7 10 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 1 3 4 5 6 7 11 12 14 15
Validation 0 11 N 0 1 3 4 5 6 7 11 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 1 3 4 5 6 7 10 12 14 15
Validation 0 255 N 0 1 3 4 5 6 7 10 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 7 N 0 1 3 4 5 6 7 11 12 14 15
Validation 0 7 N 0 1 3 4 5 6 7 11 12 14 15
After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15
cpu0: <ACPI CPU> on acpi0
ACPI: SSDT @ 0x0x7f6d3e0c/0x01F6 (v 1 PmRef Cpu0Ist 0x00003000 INTL 0x20050624)
ACPI: SSDT @ 0x0x7f6d3790/0x05F7 (v 1 PmRef Cpu0Cst 0x00003001 INTL 0x20050624)
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est0: Setting 1833 MHz
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
ACPI: SSDT @ 0x0x7f6d4002/0x00C8 (v 1 PmRef Cpu1Ist 0x00003000 INTL 0x20050624)
ACPI: SSDT @ 0x0x7f6d3d87/0x0085 (v 1 PmRef Cpu1Cst 0x00003000 INTL 0x20050624)
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est1: Setting 1833 MHz
p4tcc1: <CPU Frequency Thermal Control> on cpu1
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x8086, dev=0x2a00, revid=0x03
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2a02, revid=0x03
domain=0, bus=0, slot=2, func=0
class=03-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
map[10]: type Memory, range 64, base 0xf0000000, size 20, enabled
map[18]: type Prefetchable Memory, range 64, base 0xd0000000, size 28, enabled
map[20]: type I/O Port, range 32, base 0x1800, size 3, enabled
pcib0: matched entry for 0.2.INTA
pcib0: slot 2 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x2a03, revid=0x03
domain=0, bus=0, slot=2, func=1
class=03-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 3 supports D0 D3 current D0
map[10]: type Memory, range 64, base 0xf0100000, size 20, enabled
found-> vendor=0x8086, dev=0x2834, revid=0x03
domain=0, bus=0, slot=26, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
map[20]: type I/O Port, range 32, base 0x1820, size 5, enabled
pcib0: matched entry for 0.26.INTA
pcib0: slot 26 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x2835, revid=0x03
domain=0, bus=0, slot=26, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
map[20]: type I/O Port, range 32, base 0x1840, size 5, enabled
pcib0: matched entry for 0.26.INTB
pcib0: slot 26 INTB hardwired to IRQ 21
found-> vendor=0x8086, dev=0x283a, revid=0x03
domain=0, bus=0, slot=26, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xf0704000, size 10, enabled
pcib0: matched entry for 0.26.INTC
pcib0: slot 26 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x284b, revid=0x03
domain=0, bus=0, slot=27, func=0
class=04-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xf0500000, size 14, enabled
pcib0: matched entry for 0.27.INTA
pcib0: slot 27 INTA hardwired to IRQ 22
found-> vendor=0x8086, dev=0x283f, revid=0x03
domain=0, bus=0, slot=28, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 17
found-> vendor=0x8086, dev=0x2845, revid=0x03
domain=0, bus=0, slot=28, func=3
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
intpin=d, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTD
pcib0: slot 28 INTD hardwired to IRQ 19
found-> vendor=0x8086, dev=0x2849, revid=0x03
domain=0, bus=0, slot=28, func=5
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
intpin=b, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTB
pcib0: slot 28 INTB hardwired to IRQ 16
found-> vendor=0x8086, dev=0x2830, revid=0x03
domain=0, bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=7
map[20]: type I/O Port, range 32, base 0x1860, size 5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found-> vendor=0x8086, dev=0x2831, revid=0x03
domain=0, bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
map[20]: type I/O Port, range 32, base 0x1880, size 5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
found-> vendor=0x8086, dev=0x2832, revid=0x03
domain=0, bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=10
map[20]: type I/O Port, range 32, base 0x18a0, size 5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x2836, revid=0x03
domain=0, bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=7
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xf0704400, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found-> vendor=0x8086, dev=0x2448, revid=0xf3
domain=0, bus=0, slot=30, func=0
class=06-04-01, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2815, revid=0x03
domain=0, bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2850, revid=0x03
domain=0, bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[20]: type I/O Port, range 32, base 0x1810, size 4, enabled
found-> vendor=0x8086, dev=0x2828, revid=0x03
domain=0, bus=0, slot=31, func=2
class=01-01-8f, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 3 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0x1c00, size 3, enabled
map[14]: type I/O Port, range 32, base 0x18f4, size 2, enabled
map[18]: type I/O Port, range 32, base 0x18f8, size 3, enabled
map[1c]: type I/O Port, range 32, base 0x18f0, size 2, enabled
map[20]: type I/O Port, range 32, base 0x18e0, size 4, enabled
map[24]: type I/O Port, range 32, base 0x18d0, size 4, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 19
found-> vendor=0x8086, dev=0x283e, revid=0x03
domain=0, bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=10
map[10]: type Memory, range 32, base 0, size 8, enabled
map[20]: type I/O Port, range 32, base 0x1c20, size 5, enabled
pcib0: matched entry for 0.31.INTC
pcib0: slot 31 INTC hardwired to IRQ 19
vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 0xf0000000-0xf00fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
agp0: <Intel GM965 SVGA controller> on vgapci0
vgapci0: Reserved 0x10000000 bytes for rid 0x18 type 3 at 0xd0000000
vgapci0: Reserved 0x100000 bytes for rid 0x10 type 3 at 0xf0000000
agp0: detected 7676k stolen memory
agp0: aperture size is 256M
vgapci1: <VGA-compatible display> mem 0xf0100000-0xf01fffff at device 2.1 on pci0
uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0x1820-0x183f irq 16 at device 26.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1820
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 49
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 82801H (ICH8) USB controller USB-D> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0x1840-0x185f irq 21 at device 26.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1840
ioapic0: routing intpin 21 (PCI IRQ 21) to vector 50
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 82801H (ICH8) USB controller USB-E> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> mem 0xf0704000-0xf07043ff irq 18 at device 26.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xf0704000
ioapic0: routing intpin 18 (PCI IRQ 18) to vector 51
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> on ehci0
usb2: USB revision 2.0
uhub2: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
uhub2: 4 ports with 4 removable, self powered
ugen0: <SuYin Acer CrystalEye webcam, class 239/2, rev 2.00/1.00, addr 2> on uhub2
pci0: <multimedia> at device 27.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pcib1: domain 0
pcib1: secondary bus 2
pcib1: subordinate bus 3
pcib1: I/O decode 0x0-0x0
pcib1: no prefetched decode
pci2: <ACPI PCI bus> on pcib1
pci2: domain=0, physical bus=2
pcib2: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pcib2: domain 0
pcib2: secondary bus 6
pcib2: subordinate bus 6
pcib2: I/O decode 0x0-0x0
pcib2: no prefetched decode
pci6: <ACPI PCI bus> on pcib2
pci6: domain=0, physical bus=6
found-> vendor=0x8086, dev=0x4222, revid=0x02
domain=0, bus=6, slot=0, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 32, base 0, size 12, memory disabled
pcib2: matched entry for 6.0.INTA
pcib2: slot 0 INTA hardwired to IRQ 19
pci6: <network> at device 0.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pcib3: domain 0
pcib3: secondary bus 8
pcib3: subordinate bus 8
pcib3: I/O decode 0x0-0x0
pcib3: no prefetched decode
pci8: <ACPI PCI bus> on pcib3
pci8: domain=0, physical bus=8
found-> vendor=0x14e4, dev=0x1693, revid=0x02
domain=0, bus=8, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0, size 16, memory disabled
pcib3: matched entry for 8.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 17
bge0: <Broadcom NetLink Gigabit Ethernet Controller, ASIC rev. 0xb002> irq 17 at device 0.0 on pci8
pcib3: bge0 requested unsupported memory range 0-0xffffffffffffffff (decoding 0-0, 0-0)
bge0: 0x10000 bytes of rid 0x10 res 3 failed (0, 0xffffffffffffffff).
bge0: couldn't map memory
device_attach: bge0 attach returned 6
uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0x1860-0x187f irq 23 at device 29.0 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1860
ioapic0: routing intpin 23 (PCI IRQ 23) to vector 52
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb3: <Intel 82801H (ICH8) USB controller USB-A> on uhci2
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0x1880-0x189f irq 19 at device 29.1 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1880
ioapic0: routing intpin 19 (PCI IRQ 19) to vector 53
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb4: <Intel 82801H (ICH8) USB controller USB-B> on uhci3
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: <Intel 82801H (ICH8) USB controller USB-C> port 0x18a0-0x18bf irq 18 at device 29.2 on pci0
uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0x18a0
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: <Intel 82801H (ICH8) USB controller USB-C> on uhci4
usb5: USB revision 1.0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem 0xf0704400-0xf07047ff irq 23 at device 29.7 on pci0
ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0xf0704400
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb6: EHCI version 1.0
usb6: companion controllers, 2 ports each: usb3 usb4 usb5
usb6: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> on ehci1
usb6: USB revision 2.0
uhub6: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb6
uhub6: 6 ports with 6 removable, self powered
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib4: domain 0
pcib4: secondary bus 10
pcib4: subordinate bus 10
pcib4: I/O decode 0xf000-0xfff
pcib4: memory decode 0xf0400000-0xf04fffff
pcib4: no prefetched decode
pcib4: Subtractively decoded bridge.
pci10: <ACPI PCI bus> on pcib4
pci10: domain=0, physical bus=10
found-> vendor=0x1180, dev=0x0832, revid=0x05
domain=0, bus=10, slot=9, func=0
class=0c-00-10, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xf0400000, size 11, enabled
pcib4: requested memory range 0xf0400000-0xf04007ff: good
found-> vendor=0x1180, dev=0x0822, revid=0x22
domain=0, bus=10, slot=9, func=1
class=08-05-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xf0400800, size 8, enabled
pcib4: requested memory range 0xf0400800-0xf04008ff: good
found-> vendor=0x1180, dev=0x0843, revid=0x12
domain=0, bus=10, slot=9, func=2
class=08-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xf0400c00, size 8, enabled
pcib4: requested memory range 0xf0400c00-0xf0400cff: good
found-> vendor=0x1180, dev=0x0592, revid=0x12
domain=0, bus=10, slot=9, func=3
class=08-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xf0401000, size 8, enabled
pcib4: requested memory range 0xf0401000-0xf04010ff: good
found-> vendor=0x1180, dev=0x0852, revid=0x12
domain=0, bus=10, slot=9, func=4
class=08-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xf0401400, size 8, enabled
pcib4: requested memory range 0xf0401400-0xf04014ff: good
fwohci0: vendor=1180, dev=832
fwohci0: vendor=1180, dev=832
fwohci0: <1394 Open Host Controller Interface> mem 0xf0400000-0xf04007ff at device 9.0 on pci10
fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xf0400000
pcib4: matched entry for 10.9.INTA
pcib4: slot 9 INTA hardwired to IRQ 16
fwohci0: [MPSAFE]
fwohci0: [FILTER]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:24:1b:00:62:18:d7:00
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x7b784000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:24:1b:18:d7:00
fwe0: bpf attached
fwe0: Ethernet address: 02:24:1b:18:d7:00
fwip0: <IP over FireWire> on firewire0
fwip0: bpf attached
fwip0: Firewire address: 00:24:1b:00:62:18:d7:00 @ 0xfffe00000000, S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
pci10: <base peripheral> at device 9.1 (no driver attached)
pci10: <base peripheral> at device 9.2 (no driver attached)
pci10: <base peripheral> at device 9.3 (no driver attached)
pci10: <base peripheral> at device 9.4 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ATA controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1810-0x181f at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1810
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 54
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=7f ostat1=7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: reset tp2 stat0=ff stat1=ff devices=0x0
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 55
ata1: [MPSAFE]
ata1: [ITHREAD]
atapci1: <Intel ATA controller> port 0x1c00-0x1c07,0x18f4-0x18f7,0x18f8-0x18ff,0x18f0-0x18f3,0x18e0-0x18ef,0x18d0-0x18df irq 19 at device 31.2 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x18e0
atapci1: [MPSAFE]
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1c00
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0x18f4
ata2: reset tp1 mask=03 ostat0=50 ostat1=00
ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x18f8
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0x18f0
ata3: reset tp1 mask=03 ostat0=7f ostat1=7f
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata3: reset tp2 stat0=ff stat1=ff devices=0x0
ata3: [MPSAFE]
ata3: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 56
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to vector 57
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
ahc_isa_probe 1: ioport 0x1c00 alloc failed
ex_isa_identify()
atkbdc: atkbdc0 already exists; skipping it
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xe0000-0xe17ff on isa0
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 58
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0 0 0 0
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 132019 -> 100000
procfs registered
lapic: Divisor 2, Frequency 83339889 hz
Timecounter "TSC" frequency 1833477448 Hz quality -100
Timecounters tick every 1.000 msec
lo0: bpf attached
hptrr: no controller detected.
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
acpi_acad0: acline initialization start
battery0: battery initialization start
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
battery0: battery initialization done, tried 1 times
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
acd0: <HL-DT-ST DVDRAM GSA-T40N/JP01> DVDR drive at ata0 as master
acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad4: 305245MB <WDC WD3200BEVT-22ZCT0 11.01A11> at ata2-master UDMA33
ad4: 625142448 sectors [620181C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad4
ad4: Intel check1 failed
ad4: Adaptec check1 failed
ad4: LSI (v3) check1 failed
ad4: LSI (v2) check1 failed
ad4: FreeBSD check1 failed
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe2:sbp0:0:2:0): error 22
(probe2:sbp0:0:2:0): Unretryable Error
(probe3:sbp0:0:3:0): error 22
(probe3:sbp0:0:3:0): Unretryable Error
(probe4:sbp0:0:4:0): error 22
(probe4:sbp0:0:4:0): Unretryable Error
(probe5:sbp0:0:5:0): error 22
(probe5:sbp0:0:5:0): Unretryable Error
(probe6:sbp0:0:6:0): error 22
(probe6:sbp0:0:6:0): Unretryable Error
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010200 err: 0x00010000 pcm: 0x00010000
ioapic0: Assigning ISA IRQ 1 to local APIC 0
ioapic0: Assigning ISA IRQ 4 to local APIC 1
ioapic0: Assigning ISA IRQ 9 to local APIC 0
ioapic0: Assigning ISA IRQ 12 to local APIC 1
ioapic0: Assigning ISA IRQ 14 to local APIC 0
ioapic0: Assigning ISA IRQ 15 to local APIC 1
ioapic0: Assigning PCI IRQ 16 to local APIC 0
ioapic0: Assigning PCI IRQ 18 to local APIC 1
ioapic0: Assigning PCI IRQ 19 to local APIC 0
ioapic0: Assigning PCI IRQ 21 to local APIC 1
ioapic0: Assigning PCI IRQ 23 to local APIC 0
Trying to mount root from ufs:/dev/ad4s2a
start_init: trying /sbin/init
what I think I understand is that the address space for pcib3 is somehow invalid...0x0-0x0
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pcib3: domain 0
pcib3: secondary bus 8
pcib3: subordinate bus 8
pcib3: I/O decode 0x0-0x0
pcib3: no prefetched decode
so devices on the bus which is attached to this bridge will fail requesting memory...
bge0: <Broadcom NetLink Gigabit Ethernet Controller, ASIC rev. 0xb002> irq 17 at device 0.0 on pci8
pcib3: bge0 requested unsupported memory range 0-0xffffffffffffffff (decoding 0-0, 0-0)
bge0: 0x10000 bytes of rid 0x10 res 3 failed (0, 0xffffffffffffffff).
bge0: couldn't map memory
I can see that it's the same with bridges 1 and 2...
pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pcib1: domain 0
pcib1: secondary bus 2
pcib1: subordinate bus 3
pcib1: I/O decode 0x0-0x0
pcib1: no prefetched decode
pci2: <ACPI PCI bus> on pcib1
pci2: domain=0, physical bus=2
pcib2: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pcib2: domain 0
pcib2: secondary bus 6
pcib2: subordinate bus 6
pcib2: I/O decode 0x0-0x0
pcib2: no prefetched decode
however bridge 4 seems to be ok...
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib4: domain 0
pcib4: secondary bus 10
pcib4: subordinate bus 10
pcib4: I/O decode 0xf000-0xfff
pcib4: memory decode 0xf0400000-0xf04fffff
pcib4: no prefetched decode
pcib4: Subtractively decoded bridge.
and devices on the bus attached to pcib4 are working...
the firewire for example requests memory successfully:
found-> vendor=0x1180, dev=0x0852, revid=0x12
domain=0, bus=10, slot=9, func=4
class=08-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xf0401400, size 8, enabled
pcib4: requested memory range 0xf0401400-0xf04014ff: good
fwohci0: vendor=1180, dev=832
fwohci0: vendor=1180, dev=832
fwohci0: <1394 Open Host Controller Interface> mem 0xf0400000-0xf04007ff at device 9.0 on pci10
fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xf0400000
pcib4: matched entry for 10.9.INTA
pcib4: slot 9 INTA hardwired to IRQ 16
fwohci0: [MPSAFE]
fwohci0: [FILTER]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:24:1b:00:62:18:d7:00
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
So why is pcib4 ok but the others are not ?
Could it be a problem in the ACPI Machine Language bytecode ?
Regards
MGP
-----------------------------------------------------------------
Всичко за Евро 2008 !!!
http://sportni.bg/euro2008/
More information about the freebsd-mobile
mailing list