Dial-up Networking with Verison and Treo

[Zoran Kolic]

> > vzwenusb:
> >  set phone "#777"
> >  set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \
> >            \"\" AT OK-AT-OK ATZ OK AT\$QCMDR=3 OK AT\$QCQNC=0  OK \\dATDT\\T TIM
> > EOUT 40 CONNECT"
> >  set authname 9175555505 at vzw3g.com
> >  set authkey vzw
> >  set device /dev/ucom0
> >  set speed 230400
> >  add default HISADDR
> > 	Then invoke
> > /usr/sbin/ppp -ddial vzwenusb
> > 	I've also done it with bluetooth. 
> > In /etc/rc.local :
> > /etc/rc.bluetooth start ubt0
> > /usr/sbin/sdpd
> > /usr/local/bin/sdptool add DUN
> > /usr/sbin/rfcomm_pppd -s -C 1  -l rfcomm-server
> > /sbin/sysctl net.inet.ip.forwarding=1
> > /sbin/ipnat -C
> > /sbin/ipnat -f /usr/local/etc/rfcomm_ppd.nat.conf
>
> Thanks for the suggestions, but no joy.

I'll take a chance with ubt0.
hccontrol -n ubt0hci inquiry
/etc/rc.bluetooth stat ubt0
btsockstat
If device found in /dev, nothing to stop you.  :)

                         Zoran