(resend) Re: unable to map IRQ for my pccard
Zhang Weiwu
zhangweiwu at realss.com
Mon Jul 16 09:17:23 UTC 2007
[I didn't see majordomo send my message back to me, resend in case it's
lost. Sorry if you see this message twice.]
On Wed, 2007-07-11 at 14:31 -0400, John Baldwin wrote:
> No, we only route things once. Look at /sys/i386/pci/pci_pir.c. It keeps
> track of which IRQ a link is routed to, and we only use the BIOS call if it
> didn't look like the BIOS had already routed it, and we haven't routed it
> before. I think we are actually trying to route 0x61 btw, not 0x60 since
> it's device 2.1 (and thus probably INTB) that is keeling over.
>
> You can try using a hint like 'hw.pci0.2.INTB.irq=11' and seeing if it works.
Thank you for the insight and suggested solution. After having that
setting in /boot/device.hints I still cannot make the second card work,
just in case you are interested in this issue too, I have attached the
dmesg after used suggested hint. This dmesg is obtained by first insert
both cards and then boot.
And here is the output of pirtool after I used the hints and both cards:
[root at quasimodo /home/zhangweiwu]# pirtool
PIRTOOL for FreeBSD (c) 2002 Bruce M. Simpson
---------------------------------------------
PCI Interrupt Routing Table at 0x000FB270
-----------------------------------------
0x00: Signature: $PIR
0x04: Version: 1.0
0x06: Size: 96 bytes (4 entries)
0x08: Device: 0:6:0
0x0a: PCI Exclusive IRQs: 0x00000400
0x0c: Compatible with: 0x00000000 unknown chipset
0x10: Miniport Data: 0x00000000
0x1f: Checksum: 0x4D
Entry 0: Device 0:6:0 Slot 0 (on-board)
INTA: 60h routable irqs: 3 4 5 6 7 9 10 11 12 14 15
INTB: 00h (not connected)
INTC: 00h (not connected)
INTD: 63h routable irqs: 3 4 5 6 7 9 10 11 12 14 15
Entry 1: Device 0:2:0 Slot 0 (on-board)
INTA: 60h routable irqs: 3 4 5 6 7 9 10 11 12 14 15
INTB: 61h routable irqs: 3 4 5 6 7 9 10 11 12 14 15
INTC: 00h (not connected)
INTD: 00h (not connected)
Entry 2: Device 0:3:0 Slot 0 (on-board)
INTA: 60h routable irqs: 3 4 5 6 7 9 10 11 12 14 15
INTB: 00h (not connected)
INTC: 00h (not connected)
INTD: 00h (not connected)
Entry 3: Device 0:7:0 Slot 0 (on-board)
INTA: 60h routable irqs: 3 4 5 6 7 9 10 11 12 14 15
INTB: 61h routable irqs: 3 4 5 6 7 9 10 11 12 14 15
INTC: 00h (not connected)
INTD: 00h (not connected)
-------------- next part --------------
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.1-RELEASE #0: Thu Jul 5 12:26:43 CST 2007
root at quasimodo.realss.com:/usr/obj/usr/src/sys/QUASIMODO
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium/P55C (quarter-micron) (232.11-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x581 Stepping = 1
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 100466688 (95 MB)
avail memory = 88723456 (84 MB)
Intel Pentium detected, installing workaround for F00F bug
kbd1 at kbdmux0
cpu0 on motherboard
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 4 Entries> on motherboard
pci0: <PCI bus> on pcib0
cbb0: <TI1250 PCI-CardBus Bridge> mem 0x20822000-0x20822fff at device 2.0 on pci0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <TI1250 PCI-CardBus Bridge> mem 0x20821000-0x20821fff at device 2.1 on pci0
pccard1: <16-bit PCCard bus> on cbb1
pci0: <display, VGA> at device 3.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 6.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfcf0-0xfcff at device 6.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x9000-0x901f irq 10 at device 6.2 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge> at device 6.3 (no driver attached)
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xc9fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x3bc-0x3c3 irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: configured irq 5 not in bitmap of probed irqs 0
sio2: port may not be enabled
sio3: configured irq 9 not in bitmap of probed irqs 0
sio3: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0400> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
pcm0: <CS423x> at port 0x530-0x537,0x388-0x38b,0x220-0x233 irq 5 drq 1,0 on isa0
pcm0: [GIANT-LOCKED]
unknown: <IBM0071> can't assign resources (port)
unknown: <PNP0e03> can't assign resources (port)
ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
Timecounter "TSC" frequency 232106281 Hz quality 800
Timecounters tick every 1.000 msec
ep0: <3Com Corporation 3C589D> at port 0x100-0x10f irq 10 function 0 config 1 on pccard0
ep0: Ethernet address: 00:60:97:92:c0:27
ata2: <Lexar Media ATA Flash STORM > at port 0x110-0x11f irq 11 function 0 config 1 on pccard1
ad0: 3102MB <IBM DTCA-23240 TC5OAB1A> at ata0-master UDMA33
acd0: CDROM <SANYO CRD-S372B/1.24F> at ata0-slave PIO3
Interrupt storm detected on "irq10:"; throttling interrupt source
Trying to mount root from ufs:/dev/ad0s1a
arplookup 218.193.55.198 failed: could not allocate llinfo
arpresolve: can't allocate route for 218.193.55.198
nfs server emerson:/home/zhangweiwu/public_html: not responding
nfs server emerson:/home/zhangweiwu/public_html: not responding
nfs server emerson:/home/zhangweiwu/public_html: not responding
More information about the freebsd-mobile
mailing list