APM/Resume Problem

[Phil Short]

Hi,

After upgrading my Toshiba 7000CT from 4.11 to 5.3 (and subsequently to 
5.4-PRERELEASE) I've been having problems with resuming after suspending 
it.  Basically, it 'locks up' when resuming with the external 
(proprietary) floppy drive detached, and seems to resume properly when the 
floppy is attached. Removing the floppy drive from the kernel doesn't seem 
to help, nor does removing the references to the floppy from the 
/boot/device.hints file.

Any suggestions?

--

Phil
-------------- next part --------------
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.4-PRERELEASE #11: Thu Mar 17 22:45:24 PST 2005
    pjs at Werewindle.cygnet_hq:/usr/src/sys/i386/compile/WEREWINDLE
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium II/Pentium II Xeon/Celeron (134.45-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x650  Stepping = 0
  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory  = 167706624 (159 MB)
avail memory = 158670848 (151 MB)
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 7 Entries> on motherboard
pci0: <PCI bus> on pcib0
pci0: <display, VGA> at device 4.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 5.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0xfe60-0xfe6f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 5.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xffe0-0xffff irq 11 at device 5.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at device 5.3 (no driver attached)
pci0: <simple comms> at device 9.0 (no driver attached)
cbb0: <ToPIC97 PCI-CardBus Bridge> at device 11.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <ToPIC97 PCI-CardBus Bridge> at device 11.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pci0: <multimedia> at device 13.0 (no driver attached)
orm0: <ISA Option ROMs> at iomem 0xe8000-0xebfff,0xc0000-0xcbfff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0
fdc0: <NEC 765 or clone> at port 0x3f0-0x3f5 irq 6 drq 2 on isa0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0c02> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
ppc1: parallel port not found.
pcm0: <Yamaha OPL-SAx> at port 0x538-0x539,0x330-0x333,0x388-0x38f,0x530-0x537,0x220-0x233 irq 5 drq 0,3 on isa0
Timecounters tick every 10.000 msec
ad0: 4126MB <TOSHIBA MK4313MAT/J2.10 A> [8944/15/63] at ata0-master UDMA33
Mounting root from ufs:/dev/ad0s1a
ipfw2 initialized, divert disabled, rule-based forwarding disabled, default to deny, logging disabled
wi0: <Lucent Technologies WaveLAN/IEEE> at port 0x100-0x13f irq 11 function 0 config 1 on pccard1
wi0: using Lucent Technologies, WaveLAN/IEEE
wi0: Lucent Firmware: Station (8.10.1)
wi0: Ethernet address: 00:02:2d:2e:96:a4
wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wi0: detached
wakeup from sleeping state (slept 00:00:16)
wi0: <Lucent Technologies WaveLAN/IEEE> at port 0x100-0x13f irq 11 function 0 config 1 on pccard1
wi0: using Lucent Technologies, WaveLAN/IEEE
wi0: Lucent Firmware: Station (8.10.1)
wi0: Ethernet address: 00:02:2d:2e:96:a4
wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wi0: detached
wakeup from sleeping state (slept 00:12:32)
wi0: <Lucent Technologies WaveLAN/IEEE> at port 0x100-0x13f irq 11 function 0 config 1 on pccard1
wi0: using Lucent Technologies, WaveLAN/IEEE
wi0: Lucent Firmware: Station (8.10.1)
wi0: Ethernet address: 00:02:2d:2e:96:a4
wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wi0: detached
wakeup from sleeping state (slept 00:16:05)
wi0: <Lucent Technologies WaveLAN/IEEE> at port 0x100-0x13f irq 11 function 0 config 1 on pccard1
wi0: using Lucent Technologies, WaveLAN/IEEE
wi0: Lucent Firmware: Station (8.10.1)
wi0: Ethernet address: 00:02:2d:2e:96:a4
wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wi0: detached
wi0: <Lucent Technologies WaveLAN/IEEE> at port 0x100-0x13f irq 11 function 0 config 1 on pccard1
wi0: using Lucent Technologies, WaveLAN/IEEE
wi0: Lucent Firmware: Station (8.10.1)
wi0: Ethernet address: 00:02:2d:2e:96:a4
wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps