FreeBSD6, FSC Lifebook E8010, Xorg

amp amp at mybsd.org.my
Thu Jul 21 02:22:11 GMT 2005


>From the test that i have done, there is a conflict between agp and 
acpi_video.
I think that you can only use either one of them.


----- Original Message ----- 
From: "Rainer Duffner" <rainer at ultra-secure.de>
To: "amp" <amp at mybsd.org.my>
Cc: <freebsd-mobile at freebsd.org>; <freebsd-current at freebsd.org>
Sent: Wednesday, July 20, 2005 8:19 PM
Subject: Re: FreeBSD6, FSC Lifebook E8010, Xorg


> amp wrote:
>
>> You can try by issuing:
>>
>> shell# kldload agp
>>
>> (check your ttyv0 console or /var/log/messages for some info)
>>
>> If it OK, you can use the agp module by putting *agp_load="YES"* on 
>> /boot/loader.conf
>> or recompile the kernel back by inserting *device agp* on your kernel 
>> configuration.
>>
>>
>
>
> OK,
>
> as I said, I tried both agp in the config-file and in loader.conf - but no 
> change.
>
> As you can see from the following, it doesn't detect my i855 integrated 
> graphics controller, which I assume it should.
>
>
> this is the kernel-configuration:
>
> machine         i386
> cpu             I686_CPU
> ident           LBE
> options         SCHED_4BSD              # 4BSD scheduler
> options         PREEMPTION              # Enable kernel thread preemption
> options         INET                    # InterNETworking
> options         INET6                   # IPv6 communications protocols
> options         FFS                     # Berkeley Fast Filesystem
> options         SOFTUPDATES             # Enable FFS soft updates support
> options         UFS_ACL                 # Support for access control lists
> options         UFS_DIRHASH             # Improve performance on big 
> directoriesoptions         MD_ROOT                 # MD is a potential 
> root device
> options         NFSCLIENT               # Network Filesystem Client
> options         NFSSERVER               # Network Filesystem Server
> options         NFS_ROOT                # NFS usable as /, requires 
> NFSCLIENT
> options         MSDOSFS                 # MSDOS Filesystem
> options         CD9660                  # ISO 9660 Filesystem
> options         PROCFS                  # Process filesystem (requires 
> PSEUDOFS)options         PSEUDOFS                # Pseudo-filesystem 
> framework
> options         GEOM_GPT                # GUID Partition Tables.
> options         COMPAT_43               # Compatible with BSD 4.3 [KEEP 
> THIS!]
> options         COMPAT_FREEBSD4         # Compatible with FreeBSD4
> options         SCSI_DELAY=5000         # Delay (in ms) before probing 
> SCSI
> options         KTRACE                  # ktrace(1) support
> options         SYSVSHM                 # SYSV-style shared memory
> options         SYSVMSG                 # SYSV-style message queues
> options         SYSVSEM                 # SYSV-style semaphores
> options         _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time 
> extensions
> options         KBD_INSTALL_CDEV        # install a CDEV entry in /dev
> options         AHC_REG_PRETTY_PRINT    # Print register bitfields in 
> debug
>                                        # output.  Adds ~128k to driver.
> options         AHD_REG_PRETTY_PRINT    # Print register bitfields in 
> debug
>                                        # output.  Adds ~215k to driver.
> options         ADAPTIVE_GIANT          # Giant mutex is adaptive.
> device          isa
> device          pci
> device          fdc
> device          ata
> device          atadisk         # ATA disk drives
> device          ataraid         # ATA RAID drives
> device          atapicd         # ATAPI CDROM drives
> device          atapifd         # ATAPI floppy drives
> device          atapist         # ATAPI tape drives
> options         ATA_STATIC_ID   # Static device numbering
> device          atapicam
> device          scbus           # SCSI bus (required for SCSI)
> device          ch              # SCSI media changers
> device          da              # Direct Access (disks)
> device          sa              # Sequential Access (tape etc)
> device          cd              # CD
> device          pass            # Passthrough device (direct SCSI access)
> device          ses             # SCSI Environmental Services (and SAF-TE)
> device          atkbdc          # AT keyboard controller
> device          atkbd           # AT keyboard
> device          psm             # PS/2 mouse
> device          vga             # VGA video card driver
> device          splash          # Splash screen and screen saver support
> device          sc
> device          npx
> device          pmtimer
> device          cbb             # cardbus (yenta) bridge
> device          pccard          # PC Card (16-bit) bus
> device          cardbus         # CardBus (32-bit) bus
> device          sio             # 8250, 16[45]50 based serial ports
> device          ppc
> device          ppbus           # Parallel port bus (required)
> device          lpt             # Printer
> device          miibus          # MII bus support
> device          bge             # Broadcom BCM570xx Gigabit Ethernet
> device          wlan            # 802.11 support
> device          an              # Aironet 4500/4800 802.11 wireless NICs.
> device          awi             # BayStack 660 and others
> device          ral             # Ralink Technology RT2500 wireless NICs.
> device          wi              # WaveLAN/Intersil/Symbol 802.11 wireless 
> NICs.
> device          iwi
> device          loop            # Network loopback
> device          mem             # Memory and kernel memory devices
> device          io              # I/O device
> device          random          # Entropy device
> device          ether           # Ethernet support
> device          tun             # Packet tunnel.
> device          pty             # Pseudo-ttys (telnet etc)
> device          md              # Memory "disks"
> device          gif             # IPv6 and IPv4 tunneling
> device          faith           # IPv6-to-IPv4 relaying (translation)
> device          bpf             # Berkeley packet filter
> device          uhci            # UHCI PCI->USB interface
> device          ohci            # OHCI PCI->USB interface
> device          ehci            # EHCI PCI->USB interface (USB 2.0)
> device          usb             # USB Bus (required)
> device          ugen            # Generic
> device          uhid            # "Human Interface Devices"
> device          ukbd            # Keyboard
> device          ulpt            # Printer
> device          umass           # Disks/Mass storage - Requires scbus and 
> da
> device          ums             # Mouse
> device          ural            # Ralink Technology RT2500USB wireless 
> NICs
> device          urio            # Diamond Rio 500 MP3 player
> device          uscanner        # Scanners
> device          firewire        # FireWire bus code
> device          sbp             # SCSI over FireWire (Requires scbus and 
> da)
>
>
> That's my loader.conf:
> lbe# cat /boot/loader.conf
> agp_load="YES"
> snd_ich_load="YES"
> acpi_fujitsu_load="YES"
> cpufreq_load="YES"
> acpi_video_load="YES"
> smbus_load="YES"
> iicsmb_load="YES"
> bktr_load="YES"
>
>
> That's what I get from a dmesg:
>
> Copyright (c) 1992-2005 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>        The Regents of the University of California. All rights reserved.
> FreeBSD 6.0-BETA1 #2: Wed Jul 20 13:49:44 CEST 2005
>    root at lbe.example.org:/usr/obj/usr/src/sys/LBE
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel(R) Pentium(R) M processor 1.60GHz (1600.06-MHz 686-class CPU)
>  Origin = "GenuineIntel"  Id = 0x6d6  Stepping = 6
> 
> Features=0xafe9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
>  Features2=0x180<EST,TM2>
> real memory  = 527368192 (502 MB)
> avail memory = 506732544 (483 MB)
> bktr_mem: memory holder loaded
> npx0: [FAST]
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> acpi0: <FUJ FJNB185> on motherboard
> acpi0: Power Button (fixed)
> pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0
> pci_link1: <ACPI PCI Link LNKB> irq 11 on acpi0
> pci_link2: <ACPI PCI Link LNKC> irq 11 on acpi0
> pci_link3: <ACPI PCI Link LNKD> irq 11 on acpi0
> pci_link4: <ACPI PCI Link LNKE> irq 11 on acpi0
> pci_link5: <ACPI PCI Link LNKF> irq 11 on acpi0
> pci_link6: <ACPI PCI Link LNKG> irq 0 on acpi0
> pci_link7: <ACPI PCI Link LNKH> irq 11 on acpi0
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0xfc08-0xfc0b on acpi0
> cpu0: <ACPI CPU> on acpi0
> est0: <Enhanced SpeedStep Frequency Control> on cpu0
> p4tcc0: <CPU Frequency Thermal Control> on cpu0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pci0: <base peripheral> at device 0.1 (no driver attached)
> pci0: <base peripheral> at device 0.3 (no driver attached)
> acpi_video0: <ACPI video extension> port 0x1800-0x1807 mem 
> 0xd8000000-0xdfffffff,0xd0000000-0xd007ffff irq 11 at device 2.0 on pci0
> pci0: <display> at device 2.1 (no driver attached)
> uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1820-0x183f irq 
> 11 at device 29.0 on pci0
> uhci0: [GIANT-LOCKED]
> usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
> usb0: USB revision 1.0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1840-0x185f irq 
> 11 at device 29.1 on pci0
> uhci1: [GIANT-LOCKED]
> usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
> usb1: USB revision 1.0
> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1860-0x187f irq 
> 11 at device 29.2 on pci0
> uhci2: [GIANT-LOCKED]
> usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
> usb2: USB revision 1.0
> uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> ehci0: <Intel 82801DB/DBL/DBM (ICH4) USB 2.0 controller> mem 
> 0xd0100000-0xd01003ff irq 11 at device 29.7 on pci0
> ehci0: [GIANT-LOCKED]
> usb3: EHCI version 1.0
> usb3: companion controllers, 2 ports each: usb0 usb1 usb2
> usb3: <Intel 82801DB/DBL/DBM (ICH4) USB 2.0 controller> on ehci0
> usb3: USB revision 2.0
> uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
> uhub3: 6 ports with 6 removable, self powered
> pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> cbb0: <PCI-CardBus Bridge> irq 11 at device 10.0 on pci1
> cardbus0: <CardBus bus> on cbb0
> pccard0: <16-bit PCCard bus> on cbb0
> cbb1: <PCI-CardBus Bridge> irq 11 at device 10.1 on pci1
> cardbus1: <CardBus bus> on cbb1
> pccard1: <16-bit PCCard bus> on cbb1
> pci1: <base peripheral> at device 10.2 (no driver attached)
> cbb2: <PCI-CardBus Bridge> at device 10.3 on pci1
> cardbus2: <CardBus bus> on cbb2
> pccard2: <16-bit PCCard bus> on cbb2
> bge0: <Broadcom BCM5705M Gigabit Ethernet, ASIC rev. 0x3003> mem 
> 0xd0200000-0xd020ffff irq 11 at device 12.0 on pci1
> miibus0: <MII bus> on bge0
> brgphy0: <BCM5705 10/100/1000baseTX PHY> on miibus0
> brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 
> 1000baseTX-FDX, auto
> bge0: Ethernet address: 00:0b:5d:4c:4e:b9
> iwi0: <Intel(R) PRO/Wireless 2200BG> mem 0xd0215000-0xd0215fff irq 11 at 
> device 13.0 on pci1
> iwi0: Ethernet address: 00:0e:35:28:4e:18
> fwohci0: <Texas Instruments TSB43AB21/A/AI/A-EP> mem 
> 0xd0216000-0xd02167ff,0xd0210000-0xd0213fff irq 11 at device 14.0 on pci1
> fwohci0: OHCI version 1.10 (ROM=0)
> fwohci0: No. of Isochronous channels is 4.
> fwohci0: EUI64 00:00:0e:10:02:90:a7:76
> fwohci0: Phy 1394a available S400, 1 ports.
> fwohci0: Link S400, max_rec 2048 bytes.
> firewire0: <IEEE1394(FireWire) bus> on fwohci0
> sbp0: <SBP-2/SCSI over FireWire> on firewire0
> fwohci0: Initiate bus reset
> fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
> firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
> firewire0: bus manager 0 (me)
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel ICH4 UDMA100 controller> port 
> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1810-0x181f at device 31.1 on pci0
> ata0: <ATA channel 0> on atapci0
> ata1: <ATA channel 1> on atapci0
> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> pcm0: <Intel ICH4 (82801DB)> port 0x1c00-0x1cff,0x18c0-0x18ff mem 
> 0xd0100c00-0xd0100dff,0xd0100800-0xd01008ff irq 11 at device 31.5 on pci0
> pcm0: [GIANT-LOCKED]
> pcm0: <Unknown AC97 Codec (id = 0x414c4770)>
> pci0: <simple comms, generic modem> at device 31.6 (no driver attached)
> acpi_button0: <Power Button> on acpi0
> acpi_lid0: <Control Method Lid Switch> on acpi0
> acpi_acad0: <AC Adapter> on acpi0
> acpi_cmbat0: <Control Method Battery> on acpi0
> acpi_cmbat1: <Control Method Battery> on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: [GIANT-LOCKED]
> psm0: model Generic PS/2 mouse, device ID 0
> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on 
> acpi0
> sio0: type 16550A
> sio1 port 0x2e8-0x2ef,0x400-0x43f irq 3 drq 3 on acpi0
> sio1: type 16550A
> ppc0: <Standard parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 
> on acpi0
> ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
> ppbus0: <Parallel port bus> on ppc0
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> acpi_fujitsu0: <Fujitsu Function Buttons> on acpi0
> acpi_fujitsu0: Couldn't query volume level
> acpi_fujitsu0: Couldn't init button states
> acpi_fujitsu0: Couldn't initialize button states!
> pmtimer0 on isa0
> orm0: <ISA Option ROM> at iomem 0xdc000-0xdffff on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> Timecounter "TSC" frequency 1600062995 Hz quality 800
> Timecounters tick every 1.000 msec
> ad0: 38154MB <Seagate ST94019A 3.05> at ata0-master UDMA100
> acd0: CDRW <TOSHIBA DVD-ROM SD-R2512/1F20> at ata1-master UDMA33
> ATA PseudoRAID loaded
> cd0 at ata1 bus 0 target 0 lun 0
> cd0: <TOSHIBA DVD-ROM SD-R2512 1F20> Removable CD-ROM SCSI-0 device
> cd0: 33.000MB/s transfers
> cd0: Attempt to query device size failed: NOT READY, Medium not present
> Trying to mount root from ufs:/dev/ad0s1a
> acpi_fujitsu0: Couldn't query method
> acpi_fujitsu0: Couldn't query method
> acpi_fujitsu0: Couldn't query method
> acpi_fujitsu0: Couldn't query method
>
>
> And that's what pciconf -lv says:
> hostb0 at pci0:0:0:        class=0x060000 card=0x11d510cf chip=0x35808086 
> rev=0x02 hdr=0x00
>    vendor   = 'Intel Corporation'
>    device   = '82852GM/GME/GMV/PM, 855GM/GME Montara Host-Hub Interface 
> Bridge'    class    = bridge
>    subclass = HOST-PCI
> none0 at pci0:0:1: class=0x088000 card=0x11d510cf chip=0x35848086 rev=0x02 
> hdr=0x00    vendor   = 'Intel Corporation'
>    device   = '82852GM/GME/GMV/PM, 855GM/GME Montara System Memory 
> Controller'
>    class    = base peripheral
> none1 at pci0:0:3: class=0x088000 card=0x11d510cf chip=0x35858086 rev=0x02 
> hdr=0x00    vendor   = 'Intel Corporation'
>    device   = '82852GM/GME/GMV/PM, 855GM/GME Montara Configuration 
> Process'
>    class    = base peripheral
> acpi_video0 at pci0:2:0:   class=0x030000 card=0x128110cf chip=0x35828086 
> rev=0x02 hdr=0x00
>    vendor   = 'Intel Corporation'
>    device   = '82852GM/GME/GMV/PM, 855GM/GME Montara Integrated Graphics 
> Device'
>    class    = display
>    subclass = VGA
> none2 at pci0:2:1: class=0x038000 card=0x128110cf chip=0x35828086 rev=0x02 
> hdr=0x00    vendor   = 'Intel Corporation'
>    device   = '82852GM/GME/GMV/PM, 855GM/GME Montara Integrated Graphics 
> Device'
>    class    = display
> uhci0 at pci0:29:0:        class=0x0c0300 card=0x11ab10cf chip=0x24c28086 
> rev=0x03 hdr=0x00
>    vendor   = 'Intel Corporation'
>    device   = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller 
> #1'
>    class    = serial bus
>    subclass = USB
> uhci1 at pci0:29:1:        class=0x0c0300 card=0x11ab10cf chip=0x24c48086 
> rev=0x03 hdr=0x00
>    vendor   = 'Intel Corporation'
>    device   = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller 
> #2'
>    class    = serial bus
>    subclass = USB
> uhci2 at pci0:29:2:        class=0x0c0300 card=0x11ab10cf chip=0x24c78086 
> rev=0x03 hdr=0x00
>    vendor   = 'Intel Corporation'
>    device   = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller 
> #3'
>    class    = serial bus
>    subclass = USB
> ehci0 at pci0:29:7:        class=0x0c0320 card=0x11ab10cf chip=0x24cd8086 
> rev=0x03 hdr=0x00
>    vendor   = 'Intel Corporation'
>    device   = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB 2.0 EHCI 
> Controller'
>    class    = serial bus
>    subclass = USB
> pcib1 at pci0:30:0:        class=0x060400 card=0x00000000 chip=0x24488086 
> rev=0x83 hdr=0x01
>    vendor   = 'Intel Corporation'
>    device   = '82801BAM/CAM/DBM (ICH2-M/3-M/4-M) Hub Interface to PCI 
> Bridge'
>    class    = bridge
>    subclass = PCI-PCI
> isab0 at pci0:31:0:        class=0x060100 card=0x00000000 chip=0x24cc8086 
> rev=0x03 hdr=0x00
>    vendor   = 'Intel Corporation'
>    device   = '82801DBM (ICH4-M) LPC Interface Bridge'
>    class    = bridge
>    subclass = PCI-ISA
> atapci0 at pci0:31:1:      class=0x01018a card=0x11ab10cf chip=0x24ca8086 
> rev=0x03 hdr=0x00
>    vendor   = 'Intel Corporation'
>    device   = '82801DBM (ICH4-M) UltraATA/100 EIDE Controller'
>    class    = mass storage
>    subclass = ATA
> none3 at pci0:31:3:        class=0x0c0500 card=0x11ab10cf chip=0x24c38086 
> rev=0x03 hdr=0x00
>    vendor   = 'Intel Corporation'
>    device   = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller'
>    class    = serial bus
>    subclass = SMBus
> pcm0 at pci0:31:5: class=0x040100 card=0x127d10cf chip=0x24c58086 rev=0x03 
> hdr=0x00    vendor   = 'Intel Corporation'
>    device   = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio 
> Controller'
>    class    = multimedia
>    subclass = audio
> none4 at pci0:31:6:        class=0x070300 card=0x10d110cf chip=0x24c68086 
> rev=0x03 hdr=0x00
>    vendor   = 'Intel Corporation'
>    device   = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem 
> Controller'
>    class    = simple comms
>    subclass = generic modem
> cbb0 at pci1:10:0: class=0x060700 card=0x11c410cf chip=0x72231217 rev=0x00 
> hdr=0x02    vendor   = 'O2 Micro Inc'
>    device   = 'OZ711M3 SmartCardBus MultiMediaBay Controller'
>    class    = bridge
>    subclass = PCI-CardBus
> cbb1 at pci1:10:1: class=0x060700 card=0x11c410cf chip=0x72231217 rev=0x00 
> hdr=0x02    vendor   = 'O2 Micro Inc'
>    device   = 'OZ711M3 SmartCardBus MultiMediaBay Controller'
>    class    = bridge
>    subclass = PCI-CardBus
> none5 at pci1:10:2:        class=0x088000 card=0x11c410cf chip=0x71101217 
> rev=0x00 hdr=0x00
>    vendor   = 'O2 Micro Inc'
>    device   = 'OZ711Mx MemoryCardBus Accelerator'
>    class    = base peripheral
> cbb2 at pci1:10:3: class=0x060700 card=0x11c410cf chip=0x72231217 rev=0x00 
> hdr=0x02    vendor   = 'O2 Micro Inc'
>    device   = 'OZ711M3 SmartCardBus MultiMediaBay Controller'
>    class    = bridge
>    subclass = PCI-CardBus
> bge0 at pci1:12:0: class=0x020000 card=0x127910cf chip=0x165e14e4 rev=0x03 
> hdr=0x00    vendor   = 'Broadcom Corporation'
>    device   = 'BCM5705MA2 NetXtreme Gigabit Ethernet'
>    class    = network
>    subclass = ethernet
> iwi0 at pci1:13:0: class=0x028000 card=0x27028086 chip=0x42208086 rev=0x05 
> hdr=0x00    vendor   = 'Intel Corporation'
>    device   = 'PRO/Wireless 2200BG Network Connection'
>    class    = network
> fwohci0 at pci1:14:0:      class=0x0c0010 card=0x116210cf chip=0x8026104c 
> rev=0x00 hdr=0x00
>    vendor   = 'Texas Instruments (TI)'
>    device   = 'TSB43AB21 1394a-2000 OHCI PHY/link-layer Controller'
>    class    = serial bus
>    subclass = FireWire
> 



More information about the freebsd-mobile mailing list