FreeBSD6, FSC Lifebook E8010, Xorg

Rainer Duffner rainer at ultra-secure.de
Wed Jul 20 12:19:34 GMT 2005


amp wrote:

> You can try by issuing:
>
> shell# kldload agp
>
> (check your ttyv0 console or /var/log/messages for some info)
>
> If it OK, you can use the agp module by putting *agp_load="YES"* on 
> /boot/loader.conf
> or recompile the kernel back by inserting *device agp* on your kernel 
> configuration.
>
>


OK,

as I said, I tried both agp in the config-file and in loader.conf - but 
no change.

As you can see from the following, it doesn't detect my i855 integrated 
graphics controller, which I assume it should.


this is the kernel-configuration:

machine         i386
cpu             I686_CPU
ident           LBE
options         SCHED_4BSD              # 4BSD scheduler
options         PREEMPTION              # Enable kernel thread preemption
options         INET                    # InterNETworking
options         INET6                   # IPv6 communications protocols
options         FFS                     # Berkeley Fast Filesystem
options         SOFTUPDATES             # Enable FFS soft updates support
options         UFS_ACL                 # Support for access control lists
options         UFS_DIRHASH             # Improve performance on big 
directoriesoptions         MD_ROOT                 # MD is a potential 
root device
options         NFSCLIENT               # Network Filesystem Client
options         NFSSERVER               # Network Filesystem Server
options         NFS_ROOT                # NFS usable as /, requires 
NFSCLIENT
options         MSDOSFS                 # MSDOS Filesystem
options         CD9660                  # ISO 9660 Filesystem
options         PROCFS                  # Process filesystem (requires 
PSEUDOFS)options         PSEUDOFS                # Pseudo-filesystem 
framework
options         GEOM_GPT                # GUID Partition Tables.
options         COMPAT_43               # Compatible with BSD 4.3 [KEEP 
THIS!]
options         COMPAT_FREEBSD4         # Compatible with FreeBSD4
options         SCSI_DELAY=5000         # Delay (in ms) before probing SCSI
options         KTRACE                  # ktrace(1) support
options         SYSVSHM                 # SYSV-style shared memory
options         SYSVMSG                 # SYSV-style message queues
options         SYSVSEM                 # SYSV-style semaphores
options         _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time 
extensions
options         KBD_INSTALL_CDEV        # install a CDEV entry in /dev
options         AHC_REG_PRETTY_PRINT    # Print register bitfields in debug
                                        # output.  Adds ~128k to driver.
options         AHD_REG_PRETTY_PRINT    # Print register bitfields in debug
                                        # output.  Adds ~215k to driver.
options         ADAPTIVE_GIANT          # Giant mutex is adaptive.
device          isa
device          pci
device          fdc
device          ata
device          atadisk         # ATA disk drives
device          ataraid         # ATA RAID drives
device          atapicd         # ATAPI CDROM drives
device          atapifd         # ATAPI floppy drives
device          atapist         # ATAPI tape drives
options         ATA_STATIC_ID   # Static device numbering
device          atapicam
device          scbus           # SCSI bus (required for SCSI)
device          ch              # SCSI media changers
device          da              # Direct Access (disks)
device          sa              # Sequential Access (tape etc)
device          cd              # CD
device          pass            # Passthrough device (direct SCSI access)
device          ses             # SCSI Environmental Services (and SAF-TE)
device          atkbdc          # AT keyboard controller
device          atkbd           # AT keyboard
device          psm             # PS/2 mouse
device          vga             # VGA video card driver
device          splash          # Splash screen and screen saver support
device          sc
device          npx
device          pmtimer
device          cbb             # cardbus (yenta) bridge
device          pccard          # PC Card (16-bit) bus
device          cardbus         # CardBus (32-bit) bus
device          sio             # 8250, 16[45]50 based serial ports
device          ppc
device          ppbus           # Parallel port bus (required)
device          lpt             # Printer
device          miibus          # MII bus support
device          bge             # Broadcom BCM570xx Gigabit Ethernet
device          wlan            # 802.11 support
device          an              # Aironet 4500/4800 802.11 wireless NICs.
device          awi             # BayStack 660 and others
device          ral             # Ralink Technology RT2500 wireless NICs.
device          wi              # WaveLAN/Intersil/Symbol 802.11 
wireless NICs.
device          iwi
device          loop            # Network loopback
device          mem             # Memory and kernel memory devices
device          io              # I/O device
device          random          # Entropy device
device          ether           # Ethernet support
device          tun             # Packet tunnel.
device          pty             # Pseudo-ttys (telnet etc)
device          md              # Memory "disks"
device          gif             # IPv6 and IPv4 tunneling
device          faith           # IPv6-to-IPv4 relaying (translation)
device          bpf             # Berkeley packet filter
device          uhci            # UHCI PCI->USB interface
device          ohci            # OHCI PCI->USB interface
device          ehci            # EHCI PCI->USB interface (USB 2.0)
device          usb             # USB Bus (required)
device          ugen            # Generic
device          uhid            # "Human Interface Devices"
device          ukbd            # Keyboard
device          ulpt            # Printer
device          umass           # Disks/Mass storage - Requires scbus and da
device          ums             # Mouse
device          ural            # Ralink Technology RT2500USB wireless NICs
device          urio            # Diamond Rio 500 MP3 player
device          uscanner        # Scanners
device          firewire        # FireWire bus code
device          sbp             # SCSI over FireWire (Requires scbus and da)


That's my loader.conf:
lbe# cat /boot/loader.conf
agp_load="YES"
snd_ich_load="YES"
acpi_fujitsu_load="YES"
cpufreq_load="YES"
acpi_video_load="YES"
smbus_load="YES"
iicsmb_load="YES"
bktr_load="YES"


That's what I get from a dmesg:

Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 6.0-BETA1 #2: Wed Jul 20 13:49:44 CEST 2005
    root at lbe.example.org:/usr/obj/usr/src/sys/LBE
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) M processor 1.60GHz (1600.06-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6d6  Stepping = 6
  
Features=0xafe9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
  Features2=0x180<EST,TM2>
real memory  = 527368192 (502 MB)
avail memory = 506732544 (483 MB)
bktr_mem: memory holder loaded
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <FUJ FJNB185> on motherboard
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0
pci_link1: <ACPI PCI Link LNKB> irq 11 on acpi0
pci_link2: <ACPI PCI Link LNKC> irq 11 on acpi0
pci_link3: <ACPI PCI Link LNKD> irq 11 on acpi0
pci_link4: <ACPI PCI Link LNKE> irq 11 on acpi0
pci_link5: <ACPI PCI Link LNKF> irq 11 on acpi0
pci_link6: <ACPI PCI Link LNKG> irq 0 on acpi0
pci_link7: <ACPI PCI Link LNKH> irq 11 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xfc08-0xfc0b on acpi0
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral> at device 0.1 (no driver attached)
pci0: <base peripheral> at device 0.3 (no driver attached)
acpi_video0: <ACPI video extension> port 0x1800-0x1807 mem 
0xd8000000-0xdfffffff,0xd0000000-0xd007ffff irq 11 at device 2.0 on pci0
pci0: <display> at device 2.1 (no driver attached)
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1820-0x183f 
irq 11 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1840-0x185f 
irq 11 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1860-0x187f 
irq 11 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <Intel 82801DB/DBL/DBM (ICH4) USB 2.0 controller> mem 
0xd0100000-0xd01003ff irq 11 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <Intel 82801DB/DBL/DBM (ICH4) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib1
cbb0: <PCI-CardBus Bridge> irq 11 at device 10.0 on pci1
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <PCI-CardBus Bridge> irq 11 at device 10.1 on pci1
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pci1: <base peripheral> at device 10.2 (no driver attached)
cbb2: <PCI-CardBus Bridge> at device 10.3 on pci1
cardbus2: <CardBus bus> on cbb2
pccard2: <16-bit PCCard bus> on cbb2
bge0: <Broadcom BCM5705M Gigabit Ethernet, ASIC rev. 0x3003> mem 
0xd0200000-0xd020ffff irq 11 at device 12.0 on pci1
miibus0: <MII bus> on bge0
brgphy0: <BCM5705 10/100/1000baseTX PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 
1000baseTX-FDX, auto
bge0: Ethernet address: 00:0b:5d:4c:4e:b9
iwi0: <Intel(R) PRO/Wireless 2200BG> mem 0xd0215000-0xd0215fff irq 11 at 
device 13.0 on pci1
iwi0: Ethernet address: 00:0e:35:28:4e:18
fwohci0: <Texas Instruments TSB43AB21/A/AI/A-EP> mem 
0xd0216000-0xd02167ff,0xd0210000-0xd0213fff irq 11 at device 14.0 on pci1
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:00:0e:10:02:90:a7:76
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port 
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1810-0x181f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pcm0: <Intel ICH4 (82801DB)> port 0x1c00-0x1cff,0x18c0-0x18ff mem 
0xd0100c00-0xd0100dff,0xd0100800-0xd01008ff irq 11 at device 31.5 on pci0
pcm0: [GIANT-LOCKED]
pcm0: <Unknown AC97 Codec (id = 0x414c4770)>
pci0: <simple comms, generic modem> at device 31.6 (no driver attached)
acpi_button0: <Power Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_cmbat1: <Control Method Battery> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on 
acpi0
sio0: type 16550A
sio1 port 0x2e8-0x2ef,0x400-0x43f irq 3 drq 3 on acpi0
sio1: type 16550A
ppc0: <Standard parallel printer port> port 0x378-0x37f,0x778-0x77b irq 
7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
acpi_fujitsu0: <Fujitsu Function Buttons> on acpi0
acpi_fujitsu0: Couldn't query volume level
acpi_fujitsu0: Couldn't init button states
acpi_fujitsu0: Couldn't initialize button states!
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xdc000-0xdffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1600062995 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 38154MB <Seagate ST94019A 3.05> at ata0-master UDMA100
acd0: CDRW <TOSHIBA DVD-ROM SD-R2512/1F20> at ata1-master UDMA33
ATA PseudoRAID loaded
cd0 at ata1 bus 0 target 0 lun 0
cd0: <TOSHIBA DVD-ROM SD-R2512 1F20> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad0s1a
acpi_fujitsu0: Couldn't query method
acpi_fujitsu0: Couldn't query method
acpi_fujitsu0: Couldn't query method
acpi_fujitsu0: Couldn't query method


And that's what pciconf -lv says:
hostb0 at pci0:0:0:        class=0x060000 card=0x11d510cf chip=0x35808086 
rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82852GM/GME/GMV/PM, 855GM/GME Montara Host-Hub Interface 
Bridge'    class    = bridge
    subclass = HOST-PCI
none0 at pci0:0:1: class=0x088000 card=0x11d510cf chip=0x35848086 rev=0x02 
hdr=0x00    vendor   = 'Intel Corporation'
    device   = '82852GM/GME/GMV/PM, 855GM/GME Montara System Memory 
Controller'
    class    = base peripheral
none1 at pci0:0:3: class=0x088000 card=0x11d510cf chip=0x35858086 rev=0x02 
hdr=0x00    vendor   = 'Intel Corporation'
    device   = '82852GM/GME/GMV/PM, 855GM/GME Montara Configuration Process'
    class    = base peripheral
acpi_video0 at pci0:2:0:   class=0x030000 card=0x128110cf chip=0x35828086 
rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82852GM/GME/GMV/PM, 855GM/GME Montara Integrated 
Graphics Device'
    class    = display
    subclass = VGA
none2 at pci0:2:1: class=0x038000 card=0x128110cf chip=0x35828086 rev=0x02 
hdr=0x00    vendor   = 'Intel Corporation'
    device   = '82852GM/GME/GMV/PM, 855GM/GME Montara Integrated 
Graphics Device'
    class    = display
uhci0 at pci0:29:0:        class=0x0c0300 card=0x11ab10cf chip=0x24c28086 
rev=0x03 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1'
    class    = serial bus
    subclass = USB
uhci1 at pci0:29:1:        class=0x0c0300 card=0x11ab10cf chip=0x24c48086 
rev=0x03 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2'
    class    = serial bus
    subclass = USB
uhci2 at pci0:29:2:        class=0x0c0300 card=0x11ab10cf chip=0x24c78086 
rev=0x03 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3'
    class    = serial bus
    subclass = USB
ehci0 at pci0:29:7:        class=0x0c0320 card=0x11ab10cf chip=0x24cd8086 
rev=0x03 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB 2.0 EHCI 
Controller'
    class    = serial bus
    subclass = USB
pcib1 at pci0:30:0:        class=0x060400 card=0x00000000 chip=0x24488086 
rev=0x83 hdr=0x01
    vendor   = 'Intel Corporation'
    device   = '82801BAM/CAM/DBM (ICH2-M/3-M/4-M) Hub Interface to PCI 
Bridge'
    class    = bridge
    subclass = PCI-PCI
isab0 at pci0:31:0:        class=0x060100 card=0x00000000 chip=0x24cc8086 
rev=0x03 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DBM (ICH4-M) LPC Interface Bridge'
    class    = bridge
    subclass = PCI-ISA
atapci0 at pci0:31:1:      class=0x01018a card=0x11ab10cf chip=0x24ca8086 
rev=0x03 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DBM (ICH4-M) UltraATA/100 EIDE Controller'
    class    = mass storage
    subclass = ATA
none3 at pci0:31:3:        class=0x0c0500 card=0x11ab10cf chip=0x24c38086 
rev=0x03 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller'
    class    = serial bus
    subclass = SMBus
pcm0 at pci0:31:5: class=0x040100 card=0x127d10cf chip=0x24c58086 rev=0x03 
hdr=0x00    vendor   = 'Intel Corporation'
    device   = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller'
    class    = multimedia
    subclass = audio
none4 at pci0:31:6:        class=0x070300 card=0x10d110cf chip=0x24c68086 
rev=0x03 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller'
    class    = simple comms
    subclass = generic modem
cbb0 at pci1:10:0: class=0x060700 card=0x11c410cf chip=0x72231217 rev=0x00 
hdr=0x02    vendor   = 'O2 Micro Inc'
    device   = 'OZ711M3 SmartCardBus MultiMediaBay Controller'
    class    = bridge
    subclass = PCI-CardBus
cbb1 at pci1:10:1: class=0x060700 card=0x11c410cf chip=0x72231217 rev=0x00 
hdr=0x02    vendor   = 'O2 Micro Inc'
    device   = 'OZ711M3 SmartCardBus MultiMediaBay Controller'
    class    = bridge
    subclass = PCI-CardBus
none5 at pci1:10:2:        class=0x088000 card=0x11c410cf chip=0x71101217 
rev=0x00 hdr=0x00
    vendor   = 'O2 Micro Inc'
    device   = 'OZ711Mx MemoryCardBus Accelerator'
    class    = base peripheral
cbb2 at pci1:10:3: class=0x060700 card=0x11c410cf chip=0x72231217 rev=0x00 
hdr=0x02    vendor   = 'O2 Micro Inc'
    device   = 'OZ711M3 SmartCardBus MultiMediaBay Controller'
    class    = bridge
    subclass = PCI-CardBus
bge0 at pci1:12:0: class=0x020000 card=0x127910cf chip=0x165e14e4 rev=0x03 
hdr=0x00    vendor   = 'Broadcom Corporation'
    device   = 'BCM5705MA2 NetXtreme Gigabit Ethernet'
    class    = network
    subclass = ethernet
iwi0 at pci1:13:0: class=0x028000 card=0x27028086 chip=0x42208086 rev=0x05 
hdr=0x00    vendor   = 'Intel Corporation'
    device   = 'PRO/Wireless 2200BG Network Connection'
    class    = network
fwohci0 at pci1:14:0:      class=0x0c0010 card=0x116210cf chip=0x8026104c 
rev=0x00 hdr=0x00
    vendor   = 'Texas Instruments (TI)'
    device   = 'TSB43AB21 1394a-2000 OHCI PHY/link-layer Controller'
    class    = serial bus
    subclass = FireWire



More information about the freebsd-mobile mailing list