PCCards on IBM 380 6.0 Release

[Abuthemagician]

ok I cannot get 6.0 to recognise the PCMCIA ports on my IBM 380ED laptop.
They work without a problem in 4.11, with the following settings:
pcic0, Port 0x3e0, memory 0xd0000
pcic1, port 0x3e2, memory 0xd4000

The card I will be using is a 3com 3c589D Etherlink III card that i know is
supported.

i have added pccard_enable="YES" in rc.conf

here is the console bootlog:

syslogd: kernel boot file is /boot/kernel/kernel
kernel: Copyright (c) 1992-2005 The FreeBSD Project.
kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
1994
kernel: The Regents of the University of California. All rights reserved.
kernel: FreeBSD 6.0-RELEASE #0: Thu Nov 3 09:36:13 UTC 2005
kernel: root at x64.samsco.home:/usr/obj/usr/src/sys/GENERIC
kernel: Timecounter "i8254" frequency 1193182 Hz quality 0
kernel: CPU: Pentium/P55C (167.05-MHz 586-class CPU)
kernel: Origin = "GenuineIntel" Id = 0x543 Stepping = 3
kernel: Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
kernel: real memory = 33554432 (32 MB)
kernel: avail memory = 23379968 (22 MB)
kernel: Intel Pentium detected, installing workaround for F00F bug
kernel: npx0: [FAST]
kernel: npx0: <math processor> on motherboard
kernel: npx0: INT 16 interface
kernel: cpu0 on motherboard
kernel: pcib0: <Host to PCI bridge> pcibus 0 on motherboard
kernel: pci0: <PCI bus> on pcib0
kernel: pci0: <bridge> at device 1.0 (no driver attached)
kernel: pci0: <display, VGA> at device 3.0 (no driver attached)
kernel: pci0: <bridge, PCI-PCMCIA> at device 19.0 (no driver attached)
kernel: isa0: <ISA bus> on motherboard
kernel: pmtimer0 on isa0
kernel: orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
kernel: ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
kernel: ata1 at port 0x170-0x177,0x376 irq 15 on isa0
kernel: atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
kernel: atkbd0: <AT Keyboard> irq 1 on atkbdc0
kernel: kbd0 at atkbd0
kernel: atkbd0: [GIANT-LOCKED]
kernel: psm0: <PS/2 Mouse> irq 12 on atkbdc0
kernel: psm0: [GIANT-LOCKED]
kernel: psm0: model Generic PS/2 mouse, device ID 0
kernel: fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6
drq 2 on isa0
kernel: fdc0: [FAST]
kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0
kernel: ppc0: <Parallel port> at port 0x3bc-0x3c3 irq 7 on isa0
kernel: ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
kernel: ppbus0: <Parallel port bus> on ppc0
kernel: plip0: <PLIP network interface> on ppbus0
kernel: lpt0: <Printer> on ppbus0
kernel: lpt0: Interrupt-driven port
kernel: ppi0: <Parallel I/O> on ppbus0
kernel: sc0: <System console> at flags 0x100 on isa0
kernel: sc0: VGA <16 virtual consoles, flags=0x300>
kernel: sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
kernel: sio0: type 16550A
kernel: sio1: configured irq 3 not in bitmap of probed irqs 0
kernel: sio1: port may not be enabled
kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
kernel: unknown: <PNP0303> can't assign resources (port)
kernel: unknown: <PNP0f13> can't assign resources (irq)
kernel: unknown: <PNP0700> can't assign resources (port)
kernel: unknown: <PNP0600> can't assign resources (port)
kernel: unknown: <PNP0c02> can't assign resources (memory)
kernel: unknown: <PNP0400> can't assign resources (port)
kernel: unknown: <IBM0071> can't assign resources (port)
kernel: Timecounter "TSC" frequency 167046309 Hz quality 800
kernel: Timecounters tick every 1.000 msec
kernel: ad0: 2016MB <TOSHIBA MK2103MAV D0.10 B> at ata0-master PIO4
kernel: acd0: CDROM <HITACHI CDR-S100/0038> at ata0-slave PIO4
kernel: Trying to mount root from ufs:/dev/ad0s1a
savecore: no dumps found
Dec 8 11:52:08 root: /etc/rc: WARNING: Setting entropy source to blocking
mode.
login: ROOT LOGIN (root) ON ttyv0


--
I'm not a complete idiot -- Some parts are just missing.