fan speed, temp, etc... on a thinkpad?

[Eric Pogroski]

On Thu, 23 Oct 2003 10:36:39 -0400
Jesse Guardiani <jesse at wingnet.net> wrote:

> Howdy list,
> 
> Does anyone have a temp monitoring program running
> on a thinkpad? Particularly, I'm using an A30p 1.3Ghz
> running FreeBSD 5.1-RELEASE.
> 
> I've tried lmmon, but it gives this output, which
> looks fairly bogus:
> 
>  Motherboard Temp               Voltages
> 
>  255C / 491F / 528K        Vcore1:   +3.984V
>                            Vcore2:   +3.984V
>     Fan Speeds             + 3.3V:   +3.984V
>                            + 5.0V:   +6.654V
>     1:    0 rpm            +12.0V:  +15.938V
>     2:    0 rpm            -12.0V:  -15.938V
>     3:    0 rpm            - 5.0V:   -6.654V
> 
> 
> All my SMB junk is in the kernel:
> 
> # I2C & SMB stuff
> device          iic
> device          smbus
> device          iicbus          # Bus support, required for
> ic/iic/iicsmb below. device          iicbb
> device          iicsmb
> device          smb
> device          ichsmb
> device          intpm
> 
> And I don't/can't run ACPI. I use APM.
> 
> Any insight appreciated! Thanks!
> 
> -- 
> Jesse Guardiani, Systems Administrator
> WingNET Internet Services,
> P.O. Box 2605 // Cleveland, TN 37320-2605
> 423-559-LINK (v)  423-559-5145 (f)
> http://www.wingnet.net
> 
> 
> _______________________________________________
> freebsd-mobile at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
> To unsubscribe, send any mail to
> "freebsd-mobile-unsubscribe at freebsd.org"

Hi. Try xmbmon from ports/x11, seems to work (somewhat) on thinkpads (I
use it on 2, a 390x and a 600x). It give's at least a good approximation
of the temperature, does voltage correctly, but I can't get it to read
the fans.