ACPI thermal _ACx values

Gunnar Flygt flygt at sr.se
Tue Jun 24 09:12:33 PDT 2003


On Tue, Jun 24, 2003 at 11:20:56AM -0400, Michael W. Oliver wrote:
> Here is the problem.  When I boot up, everything is working fine, and the 
> following sysctl is set as follows:
> 
> hw.acpi.thermal.tz0._ACx: 3351 -1 -1 -1 -1 -1 -1 -1 -1 -1

(3351 - 2732) / 10 = 61.9 degrees Centigrade So that's the temperature
your system CPU is at.
> 
> Ok, this is fine, except that sometimes the first value isn't 3351.  I have 
> seen 3331 and 3341, too.  Is that a big deal?  And, how is this value set?
> 
> Now, on to the problem.  When I suspend the machine (S1), and then wake it 
> back up again, the first value is changed to -1, just like the other nine 
> values, yielding:
> 
> hw.acpi.thermal.tz0._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1
> 
> So, if I try to change the value back to 3331, I find out that this is a 
> read-only oid.  I found that I can get the value restored by disconnecting 
> the AC power (putting the machine in 'economy' mode) and then restoring the 
> AC power (putting the maching back into 'performance' mode).
> 
> I turned on verbose ACPI logging and here is what I see in the message log:
> 
> acpi_tz0: _AC9: temperature 61.9 >= setpoint -273.-2
> acpi_tz0: _AC8: temperature 61.9 >= setpoint -273.-2
> acpi_tz0: _AC7: temperature 61.9 >= setpoint -273.-2
> acpi_tz0: _AC6: temperature 61.9 >= setpoint -273.-2
> acpi_tz0: _AC5: temperature 61.9 >= setpoint -273.-2
> acpi_tz0: _AC4: temperature 61.9 >= setpoint -273.-2
> acpi_tz0: _AC3: temperature 61.9 >= setpoint -273.-2
> acpi_tz0: _AC2: temperature 61.9 >= setpoint -273.-2
> acpi_tz0: _AC1: temperature 61.9 >= setpoint -273.-2
> acpi_tz0: _AC0: temperature 61.9 >= setpoint -273.-2
> acpi_tz0: switched from NONE to _AC0: 61.9C
> acpi_tz0: WARNING - current temperature (61.9C) exceeds system limits
> acpi_tz0: _AC0: temperature 62.9 >= setpoint 61.9
> acpi_tz0: switched from NONE to _AC0: 62.9C
> acpi_tz0: switched from _AC0 to NONE: 59.9C
> acpi_tz0: _AC0: temperature 61.9 >= setpoint 61.9
> acpi_tz0: switched from NONE to _AC0: 61.9C
> acpi_tz0: switched from _AC0 to NONE: 55.9C
> 
> Do I have anything to fear in the -1 value that replaces the 3351 when 
> waking up from suspend?
> 
> I have searched high and low and found very little information.  Thanks in 
> advance for your replies, they are much appreciated.
> 
> -- 
> +-------------------------------------+------------------------------+
> |       Michael W. Oliver, CCNP       | "The tree of liberty must be |
> |         IPv6 & FreeBSD mark         | refreshed from time to time  |
> |       michael at gargantuan.com        | with the blood of patriots   |
> |   http://michael.gargantuan.com/    | and tyrants."                |
> |  ASpath-tree, Looking Glass, etc.   | - President Thomas Jefferson |
> |                                     +------------------------------+
> |      gpg key - http://michael.gargantuan.com/gnupg/pubkey.asc      |
> +--------------------------------------------------------------------+
> 
> 
> 
> _______________________________________________
> freebsd-mobile at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
> To unsubscribe, send any mail to "freebsd-mobile-unsubscribe at freebsd.org"

-- 
Gunnar Flygt
OPC Data
Sveriges Radio



More information about the freebsd-mobile mailing list