BCM/mips still hang up
Mori Hiroki
yamori813 at yahoo.co.jp
Fri Nov 16 05:30:16 UTC 2018
Hi.
I port review now.
https://reviews.freebsd.org/D18001
Regards
Hiroki Mori
----- Original Message -----
> From: Mori Hiroki <yamori813 at yahoo.co.jp>
> To: "freebsd-mips at freebsd.org" <freebsd-mips at freebsd.org>
> Cc:
> Date: 2018/11/14, Wed 07:36
> Subject: Re: BCM/mips still hang up
>
> Hi
>
>
> BCM5357(bcma) can boot and login.
>
>
> https://dmesgd.nycbug.org/index.cgi?do=view&id=4578
>
> But this have no network interface...
>
> Hiroki Moiri
>
>
>
> ----- Original Message -----
>> From: Mori Hiroki <yamori813 at yahoo.co.jp>
>> To: "freebsd-mips at freebsd.org" <freebsd-mips at freebsd.org>
>> Cc:
>> Date: 2018/11/14, Wed 07:01
>> Subject: Re: BCM/mips still hang up
>>
>> Hi.
>>
>> I found may be same problem cns11xx(arm) before.
>>
>> I think this problem cuase of uart and interrupt.
>>
>> Old Rays code work on fine on BCM/mips. But same
>> time that have same hang up problem. I doubt
>> merge INTERNG in system.
>>
>> Thanks
>>
>> Hiroki Mori
>>
>> ----- Original Message -----
>>> From: Mori Hiroki <yamori813 at yahoo.co.jp>
>>> To: "freebsd-mips at freebsd.org"
> <freebsd-mips at freebsd.org>
>>> Cc:
>>> Date: 2018/11/12, Mon 14:26
>>> Subject: BCM/mips still hang up
>>>
>>> Hi
>>>
>>> I try to 12.0-BETA4 on BCM5351 & BCM5352. It sill hang up on boot.
>>> This log.
>>>
>>> entry: mips_init()
>>> Cache info:
>>> picache_stride = 4096
>>> picache_loopcount = 4
>>> pdcache_stride = 4096
>>> pdcache_loopcount = 2
>>> max line size = 16
>>> cpu0: Broadcom processor v8.144
>>> MMU: Standard TLB, 32 entries (1K 4K 16K 64K 256K 1M 16M 64M 256M pg
>
>> sizes)
>>> L1 i-cache: 2 ways of 512 sets, 16 bytes per line
>>> L1 d-cache: 2 ways of 256 sets, 16 bytes per line
>>> L2 cache: disabled
>>> Config1=0x3ed94c82<EJTAG>
>>> ---<<BOOT>>---
>>> KDB: debugger backends: ddb
>>> KDB: current backend: ddb
>>> Copyright (c) 1992-2018 The FreeBSD Project.
>>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
> 1994
>>> The Regents of the University of California. All rights reserved.
>>> FreeBSD is a registered trademark of The FreeBSD Foundation.
>>> FreeBSD 12.0-BETA4 e78279655eb(stable/12) Buffalo_WHR-HP-G54 mips
>>> gcc version 4.2.1 20070831 patched [FreeBSD]
>>> real memory = 16109568 (15732K bytes)
>>> avail memory = 11276288 (10MB)
>>> arc4random: no preloaded entropy cache
>>> random: entropy device external interface
>>> nexus0: <MIPS32 root nexus>
>>> bhnd_nvram0: <Broadcom> on nexus0
>>> bhnd0: <BCM5352 SIBA bus> at mem 0x18000000-0x180fffff on nexus0
>>> bhnd_chipc0: <Broadcom ChipCommon I/O Controller, rev 14> mem
>>>
>>
> 0x18000000-0x18000dff,0x1fc00000-0x1fffffff,0x1c000000-0x1dffffff,0x1a000000-0x1bffffff,0x18000f00-0x18000fff,0x18000e00-0x18000eff
>
>>
>>> irq 8 at core 0 on bhnd0
>>> gpio0: <Broadcom ChipCommon GPIO> mem 0x18000000-0x18000dff on
>> bhnd_chipc0
>>> gpiobus0: <GPIO bus> on gpio0
>>> cpupic0: <MIPS32 Interrupt Controller> on nexus0
>>> bcm_mips0: <Broadcom BMIPS33 CPU, rev 6> mem
>>> 0x18002000-0x18002dff,0x18002f00-0x18002fff,0x18002e00-0x18002eff irq
> 10 at
>> core
>>> 2 on bhnd0
>>> bhnd_pwrctl0: <ChipCommon Power Control> on bhnd_chipc0
>>> clock0: <Generic MIPS32 ticker> on nexus0
>>> Timecounter "MIPS32" frequency 100000000 Hz quality 800
>>> Event timer "MIPS32" frequency 100000000 Hz quality 800
>>> gpioc0: <GPIO controller> on gpio0
>>> uart0: <16750 or compatible> mem 0x18000300-0x180003ff irq 13 on
>
>>> bhnd_chipc0
>>> uart0: console (115200,n,8,1)
>>> uart1: <16750 or compatible> mem 0x18000400-0x180004ff irq 14 on
>
>>> bhnd_chipc0
>>> cfi1: <Broadcom ChipCommon CFI> mem
>>> 0x1c000000-0x1dffffff,0x18000040-0x1800004b on bhnd_chipc0
>>> cfid0 on cfi1
>>> bhnd0: <Broadcom Fast Ethernet MAC, rev 9> mem
>>> 0x18001000-0x18001dff,0x18001f00-0x18001fff,0x18001e00-0x18001eff irq
> 9 at
>> core
>>> 1 (no driver attached)
>>> bhnd0: <Broadcom USB 1.1 Host Controller, rev 2> mem
>>> 0x18003000-0x18003dff,0x18003f00-0x18003fff,0x18003e00-0x18003eff irq
> 11 at
>> core
>>> 3 (no driver attached)
>>> bhnd0: <Broadcom MEMC SDRAM Controller, rev 1> mem
>>>
>>
> 0x18004000-0x18004dff,0-0x7ffffff,0x10000000-0x17ffffff,0x80000000-0x9fffffff,0x18004f00-0x18004fff,0x18004e00-0x18004eff
>
>>
>>> at core 4 (no driver attached)
>>> bhnd0: <Broadcom 802.11 MAC/PHY/Radio, rev 9> mem
>>> 0x18005000-0x18005dff,0x18005f00-0x18005fff,0x18005e00-0x18005eff irq
> 12 at
>> core
>>> 5 (no driver attached)
>>> bhnd0: <Broadcom RoboSwitch, rev 2> mem
>>> 0x18006000-0x18006dff,0x18006f00-0x18006fff,0x18006e00-0x18006eff at
> core 6
>> (no
>>> driver attached)
>>> cfi0 at mem 0x1c000000-0x1dffffff on nexus0
>>> nexus_alloc_resource: could not reserve resource for cfi0
>>> device_attach: cfi0 attach returned 6
>>> Timecounters tick every 10.000 msec
>>> Trying to mount root from cd9660:/dev/map/rootfs.uzip []...
>>> Warning: no time-of-day clock registered, system time will not be set
>> accurately
>>> kern.coredump:
>>> _______________________________________________
>>> freebsd-mips at freebsd.org mailing list
>>> https://lists.freebsd.org/mailman/listinfo/freebsd-mips
>>> To unsubscribe, send any mail to
>>> "freebsd-mips-unsubscribe at freebsd.org"
>>>
>>
>> _______________________________________________
>> freebsd-mips at freebsd.org mailing list
>> https://lists.freebsd.org/mailman/listinfo/freebsd-mips
>> To unsubscribe, send any mail to
>> "freebsd-mips-unsubscribe at freebsd.org"
>>
> _______________________________________________
> freebsd-mips at freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-mips
> To unsubscribe, send any mail to
> "freebsd-mips-unsubscribe at freebsd.org"
>
More information about the freebsd-mips
mailing list