BCM/mips still hang up

[Mori Hiroki]

Hi


BCM5357(bcma) can boot and login.


https://dmesgd.nycbug.org/index.cgi?do=view&id=4578

But this have no network interface...

Hiroki Moiri



----- Original Message -----
> From: Mori Hiroki <yamori813 at yahoo.co.jp>
> To: "freebsd-mips at freebsd.org" <freebsd-mips at freebsd.org>
> Cc: 
> Date: 2018/11/14, Wed 07:01
> Subject: Re: BCM/mips still hang up
> 
> Hi.
> 
> I found may be same problem cns11xx(arm) before.
> 
> I think this problem cuase of uart and interrupt.
> 
> Old Rays code work on fine on BCM/mips. But same
> time that have same hang up problem. I doubt
> merge INTERNG in system.
> 
> Thanks
> 
> Hiroki Mori
> 
> ----- Original Message -----
>>  From: Mori Hiroki <yamori813 at yahoo.co.jp>
>>  To: "freebsd-mips at freebsd.org" <freebsd-mips at freebsd.org>
>>  Cc: 
>>  Date: 2018/11/12, Mon 14:26
>>  Subject: BCM/mips still hang up
>> 
>>  Hi
>> 
>>  I try to 12.0-BETA4 on BCM5351 & BCM5352. It sill hang up on boot.
>>  This log.
>> 
>>  entry: mips_init()
>>  Cache info:
>>    picache_stride    = 4096
>>    picache_loopcount = 4
>>    pdcache_stride    = 4096
>>    pdcache_loopcount = 2
>>    max line size     = 16
>>  cpu0: Broadcom processor v8.144
>>    MMU: Standard TLB, 32 entries (1K 4K 16K 64K 256K 1M 16M 64M 256M pg 
> sizes)
>>    L1 i-cache: 2 ways of 512 sets, 16 bytes per line
>>    L1 d-cache: 2 ways of 256 sets, 16 bytes per line
>>    L2 cache: disabled
>>    Config1=0x3ed94c82<EJTAG>
>>  ---<<BOOT>>---
>>  KDB: debugger backends: ddb
>>  KDB: current backend: ddb
>>  Copyright (c) 1992-2018 The FreeBSD Project.
>>  Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>>  The Regents of the University of California. All rights reserved.
>>  FreeBSD is a registered trademark of The FreeBSD Foundation.
>>  FreeBSD 12.0-BETA4 e78279655eb(stable/12) Buffalo_WHR-HP-G54 mips
>>  gcc version 4.2.1 20070831 patched [FreeBSD]
>>  real memory  = 16109568 (15732K bytes)
>>  avail memory = 11276288 (10MB)
>>  arc4random: no preloaded entropy cache
>>  random: entropy device external interface
>>  nexus0: <MIPS32 root nexus>
>>  bhnd_nvram0: <Broadcom> on nexus0
>>  bhnd0: <BCM5352 SIBA bus> at mem 0x18000000-0x180fffff on nexus0
>>  bhnd_chipc0: <Broadcom ChipCommon I/O Controller, rev 14> mem 
>> 
> 0x18000000-0x18000dff,0x1fc00000-0x1fffffff,0x1c000000-0x1dffffff,0x1a000000-0x1bffffff,0x18000f00-0x18000fff,0x18000e00-0x18000eff 
> 
>>  irq 8 at core 0 on bhnd0
>>  gpio0: <Broadcom ChipCommon GPIO> mem 0x18000000-0x18000dff on 
> bhnd_chipc0
>>  gpiobus0: <GPIO bus> on gpio0
>>  cpupic0: <MIPS32 Interrupt Controller> on nexus0
>>  bcm_mips0: <Broadcom BMIPS33 CPU, rev 6> mem 
>>  0x18002000-0x18002dff,0x18002f00-0x18002fff,0x18002e00-0x18002eff irq 10 at 
> core 
>>  2 on bhnd0
>>  bhnd_pwrctl0: <ChipCommon Power Control> on bhnd_chipc0
>>  clock0: <Generic MIPS32 ticker> on nexus0
>>  Timecounter "MIPS32" frequency 100000000 Hz quality 800
>>  Event timer "MIPS32" frequency 100000000 Hz quality 800
>>  gpioc0: <GPIO controller> on gpio0
>>  uart0: <16750 or compatible> mem 0x18000300-0x180003ff irq 13 on 
>>  bhnd_chipc0
>>  uart0: console (115200,n,8,1)
>>  uart1: <16750 or compatible> mem 0x18000400-0x180004ff irq 14 on 
>>  bhnd_chipc0
>>  cfi1: <Broadcom ChipCommon CFI> mem 
>>  0x1c000000-0x1dffffff,0x18000040-0x1800004b on bhnd_chipc0
>>  cfid0 on cfi1
>>  bhnd0: <Broadcom Fast Ethernet MAC, rev 9> mem 
>>  0x18001000-0x18001dff,0x18001f00-0x18001fff,0x18001e00-0x18001eff irq 9 at 
> core 
>>  1 (no driver attached)
>>  bhnd0: <Broadcom USB 1.1 Host Controller, rev 2> mem 
>>  0x18003000-0x18003dff,0x18003f00-0x18003fff,0x18003e00-0x18003eff irq 11 at 
> core 
>>  3 (no driver attached)
>>  bhnd0: <Broadcom MEMC SDRAM Controller, rev 1> mem 
>> 
> 0x18004000-0x18004dff,0-0x7ffffff,0x10000000-0x17ffffff,0x80000000-0x9fffffff,0x18004f00-0x18004fff,0x18004e00-0x18004eff 
> 
>>  at core 4 (no driver attached)
>>  bhnd0: <Broadcom 802.11 MAC/PHY/Radio, rev 9> mem 
>>  0x18005000-0x18005dff,0x18005f00-0x18005fff,0x18005e00-0x18005eff irq 12 at 
> core 
>>  5 (no driver attached)
>>  bhnd0: <Broadcom RoboSwitch, rev 2> mem 
>>  0x18006000-0x18006dff,0x18006f00-0x18006fff,0x18006e00-0x18006eff at core 6 
> (no 
>>  driver attached)
>>  cfi0 at mem 0x1c000000-0x1dffffff on nexus0
>>  nexus_alloc_resource: could not reserve resource for cfi0
>>  device_attach: cfi0 attach returned 6
>>  Timecounters tick every 10.000 msec
>>  Trying to mount root from cd9660:/dev/map/rootfs.uzip []...
>>  Warning: no time-of-day clock registered, system time will not be set 
> accurately
>>  kern.coredump: 
>>  _______________________________________________
>>  freebsd-mips at freebsd.org mailing list
>>  https://lists.freebsd.org/mailman/listinfo/freebsd-mips
>>  To unsubscribe, send any mail to 
>>  "freebsd-mips-unsubscribe at freebsd.org"
>> 
> 
> _______________________________________________
> freebsd-mips at freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-mips
> To unsubscribe, send any mail to 
> "freebsd-mips-unsubscribe at freebsd.org"
>