BCM/mips still hang up

[Mori Hiroki]

Hi

I try to 12.0-BETA4 on BCM5351 & BCM5352. It sill hang up on boot.
This log.

entry: mips_init()
Cache info:
  picache_stride    = 4096
  picache_loopcount = 4
  pdcache_stride    = 4096
  pdcache_loopcount = 2
  max line size     = 16
cpu0: Broadcom processor v8.144
  MMU: Standard TLB, 32 entries (1K 4K 16K 64K 256K 1M 16M 64M 256M pg sizes)
  L1 i-cache: 2 ways of 512 sets, 16 bytes per line
  L1 d-cache: 2 ways of 256 sets, 16 bytes per line
  L2 cache: disabled
  Config1=0x3ed94c82<EJTAG>
---<<BOOT>>---
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-BETA4 e78279655eb(stable/12) Buffalo_WHR-HP-G54 mips
gcc version 4.2.1 20070831 patched [FreeBSD]
real memory  = 16109568 (15732K bytes)
avail memory = 11276288 (10MB)
arc4random: no preloaded entropy cache
random: entropy device external interface
nexus0: <MIPS32 root nexus>
bhnd_nvram0: <Broadcom> on nexus0
bhnd0: <BCM5352 SIBA bus> at mem 0x18000000-0x180fffff on nexus0
bhnd_chipc0: <Broadcom ChipCommon I/O Controller, rev 14> mem 0x18000000-0x18000dff,0x1fc00000-0x1fffffff,0x1c000000-0x1dffffff,0x1a000000-0x1bffffff,0x18000f00-0x18000fff,0x18000e00-0x18000eff irq 8 at core 0 on bhnd0
gpio0: <Broadcom ChipCommon GPIO> mem 0x18000000-0x18000dff on bhnd_chipc0
gpiobus0: <GPIO bus> on gpio0
cpupic0: <MIPS32 Interrupt Controller> on nexus0
bcm_mips0: <Broadcom BMIPS33 CPU, rev 6> mem 0x18002000-0x18002dff,0x18002f00-0x18002fff,0x18002e00-0x18002eff irq 10 at core 2 on bhnd0
bhnd_pwrctl0: <ChipCommon Power Control> on bhnd_chipc0
clock0: <Generic MIPS32 ticker> on nexus0
Timecounter "MIPS32" frequency 100000000 Hz quality 800
Event timer "MIPS32" frequency 100000000 Hz quality 800
gpioc0: <GPIO controller> on gpio0
uart0: <16750 or compatible> mem 0x18000300-0x180003ff irq 13 on bhnd_chipc0
uart0: console (115200,n,8,1)
uart1: <16750 or compatible> mem 0x18000400-0x180004ff irq 14 on bhnd_chipc0
cfi1: <Broadcom ChipCommon CFI> mem 0x1c000000-0x1dffffff,0x18000040-0x1800004b on bhnd_chipc0
cfid0 on cfi1
bhnd0: <Broadcom Fast Ethernet MAC, rev 9> mem 0x18001000-0x18001dff,0x18001f00-0x18001fff,0x18001e00-0x18001eff irq 9 at core 1 (no driver attached)
bhnd0: <Broadcom USB 1.1 Host Controller, rev 2> mem 0x18003000-0x18003dff,0x18003f00-0x18003fff,0x18003e00-0x18003eff irq 11 at core 3 (no driver attached)
bhnd0: <Broadcom MEMC SDRAM Controller, rev 1> mem 0x18004000-0x18004dff,0-0x7ffffff,0x10000000-0x17ffffff,0x80000000-0x9fffffff,0x18004f00-0x18004fff,0x18004e00-0x18004eff at core 4 (no driver attached)
bhnd0: <Broadcom 802.11 MAC/PHY/Radio, rev 9> mem 0x18005000-0x18005dff,0x18005f00-0x18005fff,0x18005e00-0x18005eff irq 12 at core 5 (no driver attached)
bhnd0: <Broadcom RoboSwitch, rev 2> mem 0x18006000-0x18006dff,0x18006f00-0x18006fff,0x18006e00-0x18006eff at core 6 (no driver attached)
cfi0 at mem 0x1c000000-0x1dffffff on nexus0
nexus_alloc_resource: could not reserve resource for cfi0
device_attach: cfi0 attach returned 6
Timecounters tick every 10.000 msec
Trying to mount root from cd9660:/dev/map/rootfs.uzip []...
Warning: no time-of-day clock registered, system time will not be set accurately
kern.coredump: