ath0: could not map interrupt
Monthadar Al Jaberi
monthadar at gmail.com
Fri Jan 4 04:54:21 UTC 2013
Maybe this is the root of the problem.
On RSPRO the PCI start slot enumerating from 17. While RB433AH start
from 18. That can explain why Slot 20 of RB433AH won't even attach
(AR7161 only has 3 slots, slot 17 to 19). That can also explain why I
get device_timeout on slot 18 and 19 cause they are miss aligned. And
don't see any interrupts from ath(4) when enabling interrupt
debugging.
I will keep digging into why they won't start enumerating correct.
br,
On Fri, Jan 4, 2013 at 2:28 AM, Monthadar Al Jaberi <monthadar at gmail.com> wrote:
> Hi,
>
> I am wondering if anyone can confirm that any ath5k (preferably
> AR5413) series miniPCI wifi works on RB433/AH/UAH.
>
> Thank you in advance
>
> On Wed, Jan 2, 2013 at 10:29 PM, Monthadar Al Jaberi
> <monthadar at gmail.com> wrote:
>> On Wed, Jan 2, 2013 at 9:43 PM, Adrian Chadd <adrian at freebsd.org> wrote:
>>> ... sounds like a definite interrupt routing issue.
>>>
>>> Who's been knee deep in the interrupt handling code in MIPS lately? Grrr.
>>> I know there's been some FDT work in MIPS and that's touched some
>>> interrupt code.. maybe that's interfering?
>>
>> I am not sure, I just re-compiled my kernel for RSPRO and it seems to work.
>>
>> I install openwrt on rb433ah and ath0 associated ok. and I could ping
>> between RSPRO(FreeBSD) and RB433AH(Openwrt). RSPRO and non working
>> RB433AH running same kernel r243866.
>>
>> Attached is my kernel config & hints. ( I am "playing around" with the
>> ar71xx_spi but that should not effect the pci code, I hope).
>>
>> #
>> # AR71XX -- Kernel configuration file for FreeBSD/MIPS for Atheros 71xx systems
>> #
>> # This includes all the common drivers for the AR71XX boards along with
>> # the usb, net80211 and atheros driver code.
>> #
>> # $FreeBSD$
>> #
>>
>> machine mips mips
>> ident RB433AH_MFS
>> cpu CPU_MIPS4KC
>> makeoptions KERNLOADADDR=0x80050000
>> options HZ=1000
>> options HWPMC_HOOKS
>>
>> files "../atheros/files.ar71xx"
>>
>> # For now, hints are per-board.
>>
>> hints "RB433AH.hints"
>>
>> makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
>>
>> # Build these as modules so small platform builds will have the
>> # modules already built.
>> makeoptions MODULES_OVERRIDE="random gpio ar71xx if_gif if_gre
>> if_bridge bridgestp usb wlan wlan_xauth wlan_acl wlan_wep wlan_tkip
>> wlan_ccmp wlan_rssadapt wlan_amrr ath ath_pci"
>>
>> options DDB
>> options KDB
>>
>> options SCHED_4BSD #4BSD scheduler
>> options INET #InterNETworking
>> #options INET6 # IPv6
>>
>> # options NFS_CL #Network Filesystem Client
>>
>> options PSEUDOFS #Pseudo-filesystem framework
>> options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
>>
>> # options NFS_LEGACYRPC
>> # Debugging for use in -current
>> options INVARIANTS
>> options INVARIANT_SUPPORT
>> options WITNESS
>> options WITNESS_SKIPSPIN
>> options DEBUG_REDZONE
>> options DEBUG_MEMGUARD
>>
>> options FFS #Berkeley Fast Filesystem
>> # options SOFTUPDATES #Enable FFS soft updates support
>> # options UFS_ACL #Support for access control lists
>> # options UFS_DIRHASH #Improve performance on big
>> directories
>> # options MSDOSFS # Read MSDOS filesystems; useful for USB/CF
>>
>> device pci
>> device ar71xx_pci
>>
>> # RTC - requires hackery in the spibus code to work
>> device pcf2123_rtc
>>
>> # GEOM modules
>> device geom_redboot # to get access to the SPI flash partitions
>> device geom_uzip # compressed in-memory filesystem hackery!
>> device geom_map
>> options GEOM_UZIP
>>
>> # NANDFS
>> options NANDFS
>>
>> ## Boot from the first MFS uzip
>> #options ROOTDEVNAME=\"ufs:md0.uzip\"
>> #options MD_ROOT
>> #options MD_ROOT_SIZE="9000"
>>
>> # Boot from NFS
>> options NFSLOCKD #Network Lock Manager
>> options NFSCLIENT #Network Filesystem Client
>> options NFS_ROOT
>>
>> options BOOTP
>> options BOOTP_NFSROOT
>> options BOOTP_NFSV3
>> options BOOTP_WIRED_TO=arge1
>> options BOOTP_COMPAT
>> options ROOTDEVNAME=\"nfs:172.16.0.101:/usr/obj/rb433ah/nfs\"
>>
>>
>> # 802.11 framework
>> options IEEE80211_DEBUG
>> options IEEE80211_ALQ
>> options IEEE80211_SUPPORT_MESH
>> # This option is currently broken for if_ath_tx.
>> options IEEE80211_SUPPORT_TDMA
>> options IEEE80211_AMPDU_AGE
>> device wlan # 802.11 support
>> device wlan_wep # 802.11 WEP support
>> device wlan_ccmp # 802.11 CCMP support
>> device wlan_tkip # 802.11 TKIP support
>> device wlan_xauth # 802.11 hostap support
>> device wlan_acl # 802.11 ACL support
>>
>> # Atheros wireless NICs
>> device ath # Atheros interface support
>> device ath_pci # Atheros PCI/Cardbus bus
>> options ATH_DEBUG
>> options ATH_DIAGAPI
>> options ATH_ENABLE_11N
>> options AH_DEBUG
>> options AH_DEBUG_ALQ
>> options ALQ
>> device ath_hal
>> option AH_SUPPORT_AR5416
>> device ath_rate_sample
>> option AH_RXCFG_SDMAMW_4BYTES
>> option AH_AR5416_INTERRUPT_MITIGATION
>> # There's no DFS radar detection support yet so this won't actually
>> # detect radars. It however does enable the rest of the channel change
>> # machinery so DFS can be debugged.
>> option ATH_ENABLE_DFS
>>
>> device mii
>> device arge
>> #options ARGE_DEBUG # Enable if_arge debugging for now
>>
>> #device usb
>> #options USB_EHCI_BIG_ENDIAN_DESC # handle big-endian byte order
>> #options USB_DEBUG
>> #options USB_HOST_ALIGN=32 # AR71XX (MIPS in general?) requires this
>> #device ehci
>>
>> device scbus
>> #device umass
>> device da
>>
>> device rb4xx
>>
>> # On-board SPI flash
>> device spibus
>> device ar71xx_spi
>> device mmc
>> device mmcsd
>> device mmcspi
>> device mx25l
>> device nand
>> device ar71xx_wdog
>>
>> device uart
>> device uart_ar71xx
>>
>> device loop
>> device ether
>> device md
>> device bpf
>> device random
>> device if_bridge
>> device gif # ip[46] in ip[46] tunneling protocol
>> device gre # generic encapsulation - only for IPv4 in IPv4 though atm
>>
>> # Enable GPIO
>> device gpio
>> device gpioled
>>
>> options AR71XX_ROUTERBOOT
>>
>>
>> # $FreeBSD$
>> hint.apb.0.at="nexus0"
>> hint.apb.0.irq=4
>>
>> # uart0
>> hint.uart.0.at="apb0"
>> # see atheros/uart_cpu_ar71xx.c why +3
>> hint.uart.0.maddr=0x18020003
>> hint.uart.0.msize=0x18
>> hint.uart.0.irq=3
>>
>> #ohci
>> #hint.ohci.0.at="apb0"
>> #hint.ohci.0.maddr=0x1c000000
>> #hint.ohci.0.msize=0x01000000
>> #hint.ohci.0.irq=6
>>
>> #ehci
>> #hint.ehci.0.at="nexus0"
>> #hint.ehci.0.maddr=0x1b000000
>> #hint.ehci.0.msize=0x01000000
>> #hint.ehci.0.irq=1
>>
>> # pci
>> hint.pcib.0.at="nexus0"
>> hint.pcib.0.irq=0
>>
>> hint.arge.0.at="nexus0"
>> hint.arge.0.maddr=0x19000000
>> hint.arge.0.msize=0x1000
>> hint.arge.0.irq=2
>> # PHY4 = 1 << 4
>> hint.arge.0.phymask=0x10
>> # Uncomment this hint for RS (not PRO)
>> # PHY20 = 1 << 20
>> # hint.arge.0.phymask=0x100000
>> hint.ukphy.0.at="miibus0"
>>
>> hint.arge.1.at="nexus0"
>> hint.arge.1.maddr=0x1a000000
>> hint.arge.1.msize=0x1000
>> hint.arge.1.irq=3
>> # PHY1, PHY2, PHY3
>> hint.arge.1.phymask=0x00
>> # should be 100 for RS
>> #hint.arge.1.media=100
>> #hint.arge.1.fduplex=1
>> # Uncomment this hint for RS (not PRO)
>> # hint.arge.1.phymask=70000
>>
>> # SPI flash
>> hint.spi.0.at="nexus0"
>> hint.spi.0.maddr=0x1f000000
>> hint.spi.0.msize=0x10
>>
>> hint.mx25l.0.at="spibus0"
>> hint.mx25l.0.cs=1
>>
>> hint.rb_cpldbus.0.at="spibus0"
>> hint.rb_cpldbus.0.cs=1
>> #
>> hint.onand.0.at="nandbus0"
>> hint.lnand.0.at="nandbus0"
>> hint.snand.0.at="nandbus0"
>>
>> hint.flash.0.at="nand0"
>> hint.flash.0.size="0x40000"
>> hint.flash.0.offset="0"
>> hint.flash.0.name="bootloader"
>> hint.flash.1.at="nand0"
>> hint.flash.1.size="0x3c0000"
>> hint.flash.1.offset="0x40000"
>> hint.flash.1.name="kernelfs"
>> hint.flash.2.at="nand0"
>> hint.flash.2.size="0"
>> hint.flash.2.offset="0x400000"
>> hint.flash.2.name="rootfs"
>>
>> hint.ar71xx_gpio.0.at="nexus0"
>>
>> #hint.rb_nandbusy.0.at="gpiobus0"
>>
>> hint.mmcspi.0.at="spibus0"
>> hint.mmcspi.0.cs=2
>>
>> # Watchdog
>> hint.ar71xx_wdog.0.at="nexus0"
>>
>>
>> br,
>>
>>>
>>>
>>> Adrian
>>>
>>>
>>> On 2 January 2013 12:40, Monthadar Al Jaberi <monthadar at gmail.com> wrote:
>>>> I tested some more. First I changed the miniPCI slot. Now boot looks like this:
>>>>
>>>> pcib0 at irq 0 on nexus0
>>>> pci0: <PCI bus> on pcib0
>>>> ath0: <Atheros 5413> irq 2 at device 19.0 on pci0
>>>> ath0: AR5413 mac 10.5 RF5413 phy 6.1
>>>> ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0063
>>>>
>>>>
>>>> Then I created a hostap. But none of my other devices sees it (laptop, iphone).
>>>>
>>>> A scan results in:
>>>>
>>>> # ifconfig wlan0 scan
>>>> wlan0: ieee80211_scanreq: flags 0x1b duration 0x7fffffff mindwell 0
>>>> maxdwell 0 nssid 0
>>>> wlan0: start_scan_locked: active scan, duration 2147483647 mindwell 0
>>>> maxdwell 0, desired mode 11g, append, nopick, once
>>>> wlan0: scan set 11g dwell min 200ms max 200ms
>>>> wlan0: scan_task: chan 11g -> 11g [active, dwell min 200ms max 200ms]
>>>> wlan0: ieee80211_ref_node (ieee80211_send_probereq:1822)
>>>> 0xc6f27000<00:15:6d:67:21:8d> refcnt 4
>>>> wlan0: send probe req on channel 11 bssid ff:ff:ff:ff:ff:ff ssid ""
>>>> wlan0: scan_task: done, [ticks 2657909, dwell min 200 scanend 2150141333]
>>>> wlan0: notify scan done
>>>> root at rb433ah:~ # ath0: device timeout
>>>>
>>>> And when I try to ping a random IP address I get the following.
>>>> Interesting is that it seems to "bail out" when it tries to send
>>>> probe_resp (last in output):
>>>> $ ping -c 1 172.168.3.2
>>>> PING 172.168.3.2 (172.168.3.2): 56 data bytes
>>>> ath0: device timeout
>>>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 14
>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 47, len 1
>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 74, len 14
>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 127, len 1
>>>> wlan0: received beacon from 28:10:7b:8e:7a:ec rssi 46
>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8
>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8
>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 127, len 1
>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 11, len 5
>>>> wlan0: [28:10:7b:8e:7a:ec] discard beacon frame, for off-channel 10
>>>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 13
>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 47, len 1
>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 74, len 14
>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 127, len 1
>>>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 14
>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 47, len 1
>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 74, len 14
>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 127, len 1
>>>> wlan0: received beacon from 00:11:50:4d:c5:08 rssi 8
>>>> wlan0: [00:11:50:4d:c5:08] discard unhandled information element, id 47, len 1
>>>> wlan0: received beacon from 28:10:7b:8e:7a:ec rssi 40
>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8
>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8
>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 127, len 1
>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 11, len 5
>>>> wlan0: [28:10:7b:8e:7a:ec] discard beacon frame, for off-channel 10
>>>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 12
>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 47, len 1
>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 74, len 14
>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 127, len 1
>>>> wlan0: [94:0c:6d:ad:61:18] discard frame, not to bss
>>>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 13
>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 47, len 1
>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 74, len 14
>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 127, len 1
>>>> wlan0: received beacon from 28:10:7b:8e:7a:ec rssi 48
>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8
>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8
>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 127, len 1
>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 11, len 5
>>>> wlan0: [28:10:7b:8e:7a:ec] discard beacon frame, for off-channel 10
>>>> wlan0: received probe_req from 00:16:cf:3c:f7:7f rssi 2
>>>> [00:16:cf:3c:f7:7f] discard probe_req frame, ssid mismatch:
>>>> 0x9ccca48e6a3b0c7f661c24413d7b9e54c5e59ddbe0c2bd96a2e65410b662f71a
>>>> wlan0: received probe_req from 00:16:cf:3c:f7:7f rssi 5
>>>> [00:16:cf:3c:f7:7f] discard probe_req frame, ssid mismatch: "default"
>>>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 12
>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 47, len 1
>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 74, len 14
>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 127, len 1
>>>> wlan0: received probe_req from 00:16:cf:3c:f7:7f rssi 4
>>>> [00:16:cf:3c:f7:7f] discard probe_req frame, ssid mismatch: "default"
>>>> wlan0: received beacon from 00:11:50:4d:c5:08 rssi 9
>>>> wlan0: [00:11:50:4d:c5:08] discard unhandled information element, id 47, len 1
>>>> wlan0: received beacon from 28:10:7b:8e:7a:ec rssi 46
>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8
>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8
>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 127, len 1
>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 11, len 5
>>>> wlan0: [28:10:7b:8e:7a:ec] discard beacon frame, for off-channel 10
>>>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 14
>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 47, len 1
>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 74, len 14
>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 127, len 1
>>>> wlan0: received beacon from 28:10:7b:8e:7a:ec rssi 40
>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8
>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8
>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 127, len 1
>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 11, len 5
>>>> wlan0: [28:10:7b:8e:7a:ec] discard beacon frame, for off-channel 10
>>>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 14
>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 47, len 1
>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 74, len 14
>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 127, len 1
>>>> wlan0: received beacon from 28:10:7b:8e:7a:ec rssi 43
>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8
>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8
>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 127, len 1
>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 11, len 5
>>>> wlan0: [28:10:7b:8e:7a:ec] discard beacon frame, for off-channel 10
>>>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 12
>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 47, len 1
>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 74, len 14
>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 127, len 1
>>>> wlan0: received beacon from 28:10:7b:8e:7a:ec rssi 40
>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8
>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8
>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 127, len 1
>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 11, len 5
>>>> wlan0: [28:10:7b:8e:7a:ec] discard beacon frame, for off-channel 10
>>>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 12
>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 47, len 1
>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 74, len 14
>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 127, len 1
>>>> wlan0: received beacon from 28:10:7b:8e:7a:ec rssi 45
>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8
>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8
>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 127, len 1
>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 11, len 5
>>>> wlan0: [28:10:7b:8e:7a:ec] discard beacon frame, for off-channel 10
>>>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 13
>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 47, len 1
>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 74, len 14
>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 127, len 1
>>>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 13
>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 47, len 1
>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 74, len 14
>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 127, len 1
>>>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 13
>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 47, len 1
>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 74, len 14
>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 127, len 1
>>>> wlan0: received beacon from 28:10:7b:8e:7a:ec rssi 47
>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8
>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8
>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 127, len 1
>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 11, len 5
>>>> wlan0: [28:10:7b:8e:7a:ec] discard beacon frame, for off-channel 10
>>>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 12
>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 47, len 1
>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 74, len 14
>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 127, len 1
>>>> wlan0: received beacon from 28:10:7b:8e:7a:ec rssi 44
>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8
>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 51, len 8
>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 127, len 1
>>>> wlan0: [28:10:7b:8e:7a:ec] discard unhandled information element, id 11, len 5
>>>> wlan0: [28:10:7b:8e:7a:ec] discard beacon frame, for off-channel 10
>>>> wlan0: received beacon from 74:44:01:2d:cb:5e rssi 14
>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 47, len 1
>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 74, len 14
>>>> wlan0: [74:44:01:2d:cb:5e] discard unhandled information element, id 127, len 1
>>>> wlan0: received probe_req from 00:aa:70:77:bd:77 rssi 0
>>>> wlan0: [00:aa:70:77:bd:77] recv probe req
>>>> wlan0: ieee80211_ref_node (ieee80211_send_proberesp:2489)
>>>> 0xc6f27000<00:15:6d:67:21:8d> refcnt 5
>>>> wlan0: send probe resp on channel 11 to 00:aa:70:77:bd:77
>>>> ath0: ath_raw_xmit: sc_inreset_cnt > 0; bailing
>>>> ....
>>>>
>>>>
>>>> On Tue, Jan 1, 2013 at 7:33 PM, Monthadar Al Jaberi <monthadar at gmail.com> wrote:
>>>>> Hi,
>>>>>
>>>>> ath(4) failed to attach on my Routerboard RB433AH running FreeBSD
>>>>> current. This is what I got during boo-up.
>>>>>
>>>>> pcib0 at irq 0 on nexus0
>>>>> pci0: <PCI bus> on pcib0
>>>>> ath0: <Atheros 5413> irq 3 at device 20.0 on pci0
>>>>> ath0: could not map interrupt
>>>>> device_attach: ath0 attach returned 6
>>>>>
>>>>> Any idea why? Anyone else is running ath(4) on this board? My wifi
>>>>> card is a Ubiquity X2 with AR5413 chip.
>>>>>
>>>>> br,
>>>>>
>>>>>
>>>>> --
>>>>> Monthadar Al Jaberi
>>>>
>>>>
>>>>
>>>> --
>>>> Monthadar Al Jaberi
>>>> _______________________________________________
>>>> freebsd-wireless at freebsd.org mailing list
>>>> http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
>>>> To unsubscribe, send any mail to "freebsd-wireless-unsubscribe at freebsd.org"
>>
>>
>>
>> --
>> Monthadar Al Jaberi
>
>
>
> --
> Monthadar Al Jaberi
--
Monthadar Al Jaberi
More information about the freebsd-mips
mailing list