ubnt routerstation and lan ports ??

[Berislav Purgar]

2011/9/17 Luiz Otavio O Souza <lists.br at gmail.com>

> On Sep 17, 2011, at 4:37 AM, Berislav Purgar wrote:
> > 2011/9/17 Maciej Milewski <milu at dat.pl>
> >
> >> Hi,
> >>
> >> On piątek, 16 września 2011 23:31:05 Berislav Purgar wrote:
> >>> i have tried hint.arge.1.phymask=0x70000  / 0x30000 / 70000 and nothing
> >> of
> >>> that can make it to work .. :(
> >>> tried openwrt to check ports and everything is OK.
> >>>
> >>> Beri
> >> I have this settings in my hints file and arge1 works:
> >>
> >> hint.arge.1.at="nexus0"
> >> hint.arge.1.maddr=0x1a000000
> >> hint.arge.1.msize=0x1000
> >> hint.arge.1.irq=3
> >> # PHY1, PHY2, PHY3
> >> hint.arge.1.phymask=0x0e
> >> # should be 100 for RS
> >> hint.arge.1.media=100
> >> hint.arge.1.fduplex=1
> >>
> >> Kind regards,
> >> Maciek
> >>
> >
> > Hi
> >
> > tried 0x0e (but i think that 0x0e is for RSPRO) and same thing ..
> > The only thing I noticed is that arge1 is always active regardless of the
> > cable was plugged or not.
>
>
> Yes, 0x0e is only valid for rspro. My routerstation worked fine with:
>
> # PHY20 = 1 << 20
> hint.arge.0.phymask=0x100000
>
> # PHY16, PHY17
> hint.arge.1.phymask=0x30000
>
> (plus all the other lines from Maciej example.)
>
>
> Regards,
> Luiz

Hi

I tried all combinations and simply does not work.

PHY16 = 0x10000 LAN1
PHY17 = 0x20000 LAN2
PHY18 = 0x40000 (LAN3 - not used)
PHY19 = 0x80000 (LAN4 - not used)

PHY20 = 0x100000 WAN - is't OK and work

I simply have no idea what to do more: (