ubnt routerstation and lan ports ??

[Berislav Purgar]

2011/9/17 Maciej Milewski <milu at dat.pl>

> Hi,
>
> On piątek, 16 września 2011 23:31:05 Berislav Purgar wrote:
> > i have tried hint.arge.1.phymask=0x70000  / 0x30000 / 70000 and nothing
> of
> > that can make it to work .. :(
> > tried openwrt to check ports and everything is OK.
> >
> > Beri
> I have this settings in my hints file and arge1 works:
>
> hint.arge.1.at="nexus0"
> hint.arge.1.maddr=0x1a000000
> hint.arge.1.msize=0x1000
> hint.arge.1.irq=3
> # PHY1, PHY2, PHY3
> hint.arge.1.phymask=0x0e
> # should be 100 for RS
> hint.arge.1.media=100
> hint.arge.1.fduplex=1
>
> Kind regards,
> Maciek
>

Hi

tried 0x0e (but i think that 0x0e is for RSPRO) and same thing ..
The only thing I noticed is that arge1 is always active regardless of the
cable was plugged or not.

arge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu
1500

options=80000<LINKSTATE>
        ether
00:15:6d:c4:20:f6
        inet 192.168.1.1 netmask 0xffffff00 broadcast
192.168.1.255
        media: Ethernet autoselect (100baseTX
<full-duplex>)
        status:
active
arge1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu
1500
        ether
00:15:6d:c4:20:f7
        media: Ethernet 100baseTX
<full-duplex>
        status: active

Beri